• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 춘계 학술발표대회 개요집
• /
• pp.290-292
• /
• 2004

In this paper, static and fatigue load tests for the specimens, components and carbody were carried out to investigate the strength of welded joints in aluminum rolling stock. Tensile load test results showed that the static strength of welded joint for heat-treated alloys is reduced significantly and fatigue strengths are scattered by the welding imperfections. Component and whole carbody fatigue test results showed agreements with the design fatigue strength standards for specimens of same joint detail. Test results revealed that full penetration welding and strict management of welding procedure are crucial for securing strength of welded joint in aluminum carbody.

• 한국자동차공학회논문집
• /
• 제6권2호
• /
• pp.220-227
• /
• 1998

In substitution of beam-nonlinear spring model for real-car, it may have errors due to complicated characteristics of joint and overestimation of joints stiffness. In this research, a method for the joint modeling was suggested by nonlinear static and dynamic analyses of beam and shell joint models and verified by the application of accomplished joint modeling method to simplified full car model. In consequence, modified simplified full car model was improved in local acceleration and rigid wall force. Finally, the frontal crash analyses with the dummy were established and the accelerations of accelerations of head, chest and pelvis had good agreements with those of shell model.

• Journal of Welding and Joining
• /
• 제16권4호
• /
• pp.109-116
• /
• 1998

The three-dimensional profile of a solder fillet is predicted by minimizing the surface tension and gravity energies of the solder joint using finite element modeling. Geometric complexity stemming from the inclined plane of the gullwing lead is resolved by employing three element types. These element types are used to describe the joint profile formed on the vertical, inclined and interfacial planes. The predicted solder joint profiles show good agreements with the experimental data provided that the solder volume is adjusted considering the wicking effects. Effects of the pad length, inclined lead angle and solder volume on joint profiles are also investigated.

• 수산해양교육연구
• /
• 제18권2호
• /
• pp.85-97
• /
• 2006

With extension of national jurisdiction over coastal living resources, new dimensions and objectives should be added to international cooperation in distant-water fisheries concepts. For distant-water fishing nations, Korea, joint exploitation of these resources is today considered not only as a way of producing additional income opportunities, but first of all as at least a partial solution to neutralization of harvesting limitations imposed on them in traditionally exploited fishing grounds.This paper explores the development of Korean distant-water fisheries agreements and reviews the various types of agreements currently in place and discusses the future of Korean distant-water fisheries agreements with third countries. The relationship between coastal States and fishing fleets from non-adjacent countries has been transformed since the 1980s. This was primarily a result of the declaration of Exclusive Economic Zones(EEZs) by many coastal states in the years leading up to the close of the negotiations of the UNCLOS in 1982. Significantly, by recognizing the right of coastal states to determine how their waters were to be exploited, UNCLOS provided a legal basis and economic motivation for the negotiation of access agreements between coastal states and distant-water fishing nations, KoreaThere is a real danger that Korean distant-water fisheries agreements could and do result in the adverse environmental impacts experienced in Korean coastal waters being transferred to third country water and consequently creating socio-economic problems for these third countries. Korean distant-water fisheries agreements with third countries have the potential to be a force for good if they are well managed and if the principals that will be applied within Korean coastal waters, through the reform of the distant-water fisheries policy, are applied equally upon third country waters.

• Journal of Welding and Joining
• /
• 제23권1호
• /
• pp.35-40
• /
• 2005

In this paper, static and fatigue load tests for the specimens, components and carbody were carried out to investigate the strength of welded joints in aluminum rolling stock. Tensile test results showed that the static strength of welded joint for the heat-treated alloy is reduced significantly and fatigue strength data are scattered by the welding imperfections. Component and whole carbody fatigue test results showed agreements with the design fatigue strength standards for specimens of the same joint detail. Test results revealed that full penetration welding and strict management of welding procedure are crucial for securing the strength of welded joint in aluminum carbody.

• Journal of Welding and Joining
• /
• 제16권4호
• /
• pp.117-124
• /
• 1998

During the reflow process in SMT, the molten solder has been observed to move upward and solidify along the gullwing lead, which is called the wicking phenomenon. In this paper, possible causes of the wicking are investigated, and its effects on the solder joint profile are quantitatively estimated by introducing the wicking constant. The free energy reduction by intermetallic formation between the copper and tin seems to be the major source of wicking action. The joint profiles of the gullwing lead are calculated using the previous finite element formulation incorporated with the wicking constant. The calculated results show reasonably good agreements with the experimental data when the wicking effects are considered.

• Strategy21
• /
• 통권37호
• /
• pp.193-241
• /
• 2015

China, Japan and Korea are the world's top 10 energy consumers, and so very interested in the development of seabed hydrocarbon resources in order to meet their energy demands. The East China Sea is the tri-junction area where three countries' entitlements on the maritime boundaries are overlapped. There are abundant oil reserves in the East China Sea, and therefore competitions among countries are growing to get control of them. Although these countries have concluded the bilateral agreements to jointly develop resources in the East China Sea, they do not function as well. Because joint development and management of seabed petroleum resources can lead to stable development system, and to lower possibility of legal and political disputes, the needs for joint development agreement among three countries are urgent. Meanwhile, Northeast Asian seas are semi-closed seas, which are geographically closed and vulnerable to marine pollution. Moreover there are a lot of nuclear power plants in coastal area, and seabed petroleum resources are being developed. So it is likely to occur nuclear and oil spill accidents. Fukushima nuclear disaster and Bohai Bay oil spill accident in 2011 are the cases to exhibit the potential of major marine pollution accidents in this area. It is anticipated that the risks become higher because power plants and offshore oil platforms are extending gradually. Therefore, the ways to seek the joint marine environmental protection agreement focused on regulation of nuclear power plant and offshore oil platform have to be considered. In this paper, we try to find the way to make joint development and joint environmental protection agreement in Northeast Asian seas. We concentrate on the measure to drive joint development of seabed petroleum deposits in East China Sea's overlap area, despite of maritime delimitation and territorial disputes, and we try to drive joint marine environmental protection system to respond to marine pollution and accidents due to offshore oil platform and nuclear power plants. Through these consideration, we seek solutions to deal with lack of energy, disputes of maritime territorial and boundary delimitation, and marine pollution in Northeast Asia.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.73-77
• /
• 2004

Failure predictions of composite single-lap bonded joints were performed considering both of composite adherend failure and bondline failure. An elastic-perfectly plastic model of adhesive and a delamination failure criterion are used. The failure prediction results such as failure mode and strength have very good agreements with the test results of joint specimens with various bonding methods and parameters. The influence of variations in the effective strength (that is, adhesion performance) and plastic behavior of adhesive on the failure characteristics of composite bonded joints are investigated numerically. The numerical results show that optimal joint strength is archived when adhesive and delamination failure occur in the same time.

• 한국중재학회지:중재연구
• /
• 제21권1호
• /
• pp.259-277
• /
• 2011

In 2008, North Korea revised its Foreign Economic Arbitration Act. To some extent, the new Act reflected such international standard of arbitration as UNCITRAL Arbitration Rules. In this paper, the said Act will be evaluated, and then cooperation ways of South-North Korea on Inter-Korean Commercial Arbitration will be suggested. In 2007, the Ministry of Unification has designated the Korean Commercial Arbitration Board as Inter-Korean Arbitration Committee and has made efforts to prepare follow-up measures on the two Agreements of Inter-Korean Commercial Arbitration. In 2008 however, the follow-up measures has in fact been suspended. In order to revitalize the Inter-Korean commercial arbitration, some prerequisites must be satisfied. First, Inter-Korean Arbitration Committee for Inter-Korean commercial arbitration should re-open as soon as possible. Second, as North Korea recently shows interest in joining the New York Convention on the Recognition and Enforcement of Foreign Arbitral Awards(now so called New York Convention), Governmental Authority of Rep. of Korea should also actively assist and support their joining in New York Convention. Third, both Korean governments should carry out joint study on raising the efficiency of the arbitration system which they will use. Fourth, comparative study on arbitration systems used in both countries should be conducted. Also, it may is very timely to discuss the issue in international arbitration community such as "North-East Asia International Arbitration Conference" or other similar events. In conclusion, continuous study on prevention of commercial disputes between South-North Korea and ways to resolve disputes when they arise should be conducted.

• 한국중재학회지:중재연구
• /
• 제14권2호
• /
• pp.3-46
• /
• 2004

To realize the spirit of the South-North Joint Declaration of June 15, 2000, the competent authorities of the South and the North of Korea have reached two Agreements to settle commercial disputes as well as to set up an arbitral organization called 'South-North Commercial Arbitration Commission'. The Commission is an institutional organization for settlement of commercial disputes arising from trade and investment between south and north Korea. Under the situation, it is becoming a problem of vital importance how to manage and control the Commission for prompt and effective settlement of south-north commercial disputes. While analyzing the above two Agreements for dispute-settlement mechanism, the author proposes desirable ideas and directions in connection with the Commission as follows: 1. First of all, the Commission should become a central common system for settlement of commercial disputes which meets the demand of capitalistic market economy. 2. The Authorities of south and north Korea should recognize that the availability of prompt, effective and economical means of disputes resolution such as arbitration and conciliation to be made by the Commission would promote the orderly growth and encouragement of south-north trade and investment. 3. The Korean Commercial Arbitration Board(KCAB) should be designated as the Arbitration Commission of South Korea because the KCAB is the only authorized institution in South Korea, statutorily empowered to settle any kind of commercial disputes at home and abroad.