• Journal of the Korean Wood Science and Technology
• /
• v.44 no.4
• /
• pp.600-606
• /
• 2016

Wood-based composite panels such as plywood, particleboard (PB), or medium density fiberboard (MDF) are mostly used in the lamination on their surface for the manufacturing of furniture, or interior building products, the concern on the formaldehyde emission (FE) from the surface laminated wood panels is increasingly attracting attentions from the public. Thus, this study was conducted to understand influence of surface laminating materials to the FE from PB and MDF with or without edge sealing, using 24-hour desiccator method. Both PB samples that had been laminated on their surface with low-pressure laminate (LPL) or polypropylene (PP) film and MDF that had been treated with poly(vinyl chloride) (PVC) or coating were tested for the FE with or without edge sealing. As expected, the FE of PB with the sealed edges decreased to 37.4% and 80.7% with the LPL and PP lamination, respectively. The surface laminated MDF with the sealed edges also showed a decrease in the emission up to 57.8% and 54.3%, with the PVC lamination and coating, respectively. However, the coated MDF samples showed 5.3% increase in the emission when their edges were not sealed, indicating a FE form the solvent used for coating. These results showed that the type of surface lamination materials on wood-based composite panels has a great impact on their resultant FE, indicating that the influence of surface laminating materials should be taken into consideration for the formaldehyde mission measurement.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.2
• /
• pp.147-158
• /
• 2017

Among the energy consumption in building, the heating energy takes the largest part. Therefore, it is important to minimize the heat energy loss in building for the reduction of overall energy use in construction. The most important points for the minimization of energy loss in building are insulation and airtightness. Especially, in wood houses, airtightness is very important for energy saving as well as increase of durability. However, the researches on airtightness of wood buildings have been started recently and are very deficient especially in Korea. In this study, air leakage properties and airtightness performance were evaluated for light-frame wood houses built in Daejeon and Chungnam area. Total 7 houses were evaluated, among which four houses (Case 1 to Case 4) were in the construction stage before interior finish and the other three houses (Case 5 to Case 7) were after completion of construction work. The tests for airtightness were conducted by pressurization-depressurization method, and the factors included in the measurements includes air leakage rate at 50 Pa (CMH50), air change rate at 50 Pa (ACH50), equivalent leakage area (EqLA) and EqLA per floor area. As a result of this study, key air leakage points in wood houses were found to be the gaps between floor and wall, the holes for wiring and plumbing, the double glasses windows and the entrance doors. The average value of ACH50 for the houses after completion of construction work was $3.5h^{-1}$ that was similar to Europe standard ($3.0h^{-1}$). ACH50 was proportional to EqLA per floor area but inversely proportional to the internal volume, the net floor area and the area of window.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.17 no.6
• /
• pp.1409-1411
• /
• 2003

The indirect carbonization without solvent for the extraction of the natural undiluted solution has been studied. The following results have been obtained. 1. The traditional wood undiluted solution distillation can be embodied with the indirect carbonization without solvent of the airtight space. The system of the indirect carbonization without solvent is the indirect dry distillation apparatus. It is composed of the high-temperature stove, the exterior can, material bag, interior can, collect water can and air-fan.

• Journal of the Korea Furniture Society
• /
• v.27 no.3
• /
• pp.253-262
• /
• 2016

Woodcraft activity is inseparable with our ordinary life and its relevant research should be consistently maintained because it has significant educational value to blossoming students. These days, which interest in woodcraft is rapidly expanding from early childhood to old age, this study was done to provide images to those who work in this field or who have interest. Out of the 43 jewelry and gift boxes used in this study, species of white which has low proportion of packing materials consists of species of Fir (Abies spp), Birch (Betula spp) and Amercia basswood (Tilia americana Linnaeus) and the higher proportion species of Mahogany (Swietenia macrophylla), Bayor (Pteorospermum diversifolium Bl), Snakewood (Piratinera guianensis aubl.) and Bintangor (Calophhyllum spp.) were used in valuable products. It was showed that out of 56 works selected from '400 Wood Boxes', the species of Walnut (Juglans regia), Cherry (Prunus serotina), Wenge (Milletia laurentii De. wild), Ebony (Diospyros spp.), Ash (Fraxinus spp.) and Cocobolo (Dallbergia cultrata Grah.) were frequently used.

• Journal of the Korea Furniture Society
• /
• v.25 no.3
• /
• pp.198-204
• /
• 2014

Aggravation of natural environment, improvements in income, internet diffusion, spread of five-day work a week, and population aging seem very different from each other. However they boil down to consumption. These culture patterns are changing into environment-friendly and productive housing culture. In other words, people might tend to have frequent contacts with not only environment-friendly housing in bustling cities but also woods that is environment friendly materials in their leisure time. In the period of people young and old alike are in favor of woodcrafts, this study was conducted for giving information to who speicalized in woodcrafts. Furthermore, the study shows that other countries also added grain and figure to woodcrafts for visually appealing.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.6
• /
• pp.447-447
• /
• 2023

This study aimed to convert underutilized moso bamboo into high-value added products such as fences, interior materials, lighting fixtures, and accessories. Green moso bamboo poles with a diameter of approximately 10 cm and a length of approximately 3.7 m were heat treated at 140℃ using a large-scale kiln. The processing time was meticulously adjusted through various stages, including pretreatment (6-8 hours at 60℃), cooking (8-10 hours at 100℃), steaming (26-30 hours at 120℃), heating (4-6 hours at 140℃), and finally, cooling (below 80℃). A meticulously designed heat treatment process has enabled efficient mass production of moso bamboo poles with improved qualities, including minimal splitting, moisture levels below 3%, and a specific gravity of 1.05. The focus of this study was to present the physical and drying properties, such as color, dimensional change, specific gravity, moisture content, and splitting, observed during the heat treatment process.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.31-38
• /
• 1999

This paper deals with a coating technique of hardening surface layer of softwood{Larix leptolepis) flooring board to improve its surface properties such as hardness and abrasion resisitance without spoiling its exellent qualities such as beautiful color tones and great strength. For surface hardening of the wood, polyurethane wood sealer was used as under coat, polyurethane sanding sealer as intermediate coat, and UV-curing epoxy acrylate and urethane acrylate varnishes as top coat. The hardness of the wood was improved by the coating treatment and it was similar to that of high density hardwood such as oak, keruing. The abrasion resistance of the coated wood was greatly improved by UV curing epoxy acrylate or urethane acrylate varnishes. Adhesion properties and impact resisitance of the coated wood surface were also good. It was suggested that the well-coated larch wood could be used as interior flooring board as substitute for hardwood such as keruing.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.1
• /
• pp.88-95
• /
• 2004

The purpose of this study is to identify the species of wood members used in the Keunjungjeon Hall, main building of the Kyungbok palace in Seoul. The total 144 samples consist of 52 from pillars and 92 from other wood members. Only two species were identified, which were Abies holophylla Max. (needle fir) and Pinus densiflora Sieb. et Zucc. (Japanese red pine). For the pillars, A. holophylla were more abundantly used than P. densiflora. Among 20 outer pillars ('Pyeongju'), 11 were A. holophylla, and 9 were P. densiflora. Among 12 inner pillars ('Naejinkoju'), 7 were A. holophylla, and 5 were P. densiflora. Among 4 inner corner pillars ('Gwikoju'), 3 were A. holophylla and 1 was P. densiflora. For 92 other wood members, only 2 purlins were A. holophylla and the others were all P. densiflora. The results suggest that the common opinion 'Palace buildings of Korea are made from red pine woods' should be corrected. We think that fir logs might be used for the pillars instead of pines because long and straight pines were not available during 1860s due to heavy utilization of pines as construction and fuel materials in the late Chosun period.

• Korean Institute of Interior Design Journal
• /
• no.36
• /
• pp.111-120
• /
• 2003

Asian design has mastered the use of natural elements in the home to create a sense of harmony and balance. The viewpoint of the West recognizes the nature to be conquered while the viewpoint of the Orient recognizes it to be unison with a human being. Additionally, the viewpoint of the Orient reflects a harmonious relationship between the human being and the nature, and it does not see assuredly from an opposed viewpoint. The Five elements, one of oriental notion, are based on an affinity between the human being and the nature. The objectives of this study are to understand the Five elements composed of wood, fire, earth, metal, water and to suggest a substantial method for treating a harmonious and balanced environment in the collaboration of the interior materials by the Five elements. When the interior materials incorporate all the relationships of the Five elements, a space will accomplish harmony with the nature and the universe, thus it will be in tune with surrounding.

• Korean Institute of Interior Design Journal
• /
• v.16 no.1 s.60
• /
• pp.56-64
• /
• 2007

Community facilities in apartment complex have been developed through residents' needs for housing environmental amenities and social trend for 'Well-being' combined with marketing competition among construction companies. But community facilities and fitness centers which are in the initial stage of development are not well fit with residents' needs because the designers plan the community facilities without considering on residents' life-style and preference. This study investigates the present status of fitness center, and surveys the residents' preference for the proposed fitness center design. The result includes that fitness center users in apartment complex want a convenient and comfortable resting spaces similar level with those in fitness center of mixed-use residential building. A resting space provides opportunity that community members meet each other as well as they can rest after exercise. The result also shows that the fitness center users prefer wood floor and wall as interior finishing materials in exercising space and resting space, which users think, gives more comfortable and splendid feeling.