• Journal of Bio-Environment Control
• /
• v.20 no.4
• /
• pp.283-289
• /
• 2011

This study was conducted to examine the effects of defoliation treatment on the growth and yield of strawberry ($Fragaria{\times}ananassa$ cv. Maehyang and Seolhyang) during nursery period. Leaves of strawberry plantlet had been removed except two, three and four fully expanded leaves until planting date. As the intensity of defoliation was strong, the petiole length was reduced and overgrowth of strawberry plantlet was suppressed. Outer diameter of crown in defoliation treatments significantly decreased but inner diameter of crown was not significant. Number of primary roots of the 3 leaves or 4 leaves defoliation treatment generally tended to increase, but there was not significantly different among treatments. Fresh weight and leaf area in the defoliation treatments significantly decreased and the root weight were higher in partial 3 leaves or 4 leaves defoliation treatment but was not significantly different among treatments. Because T/R ratio decreased significantly as growth inhibition of above-ground part compared to underground part, it is considered easy to take rooting after plantlet plating. As the intensity of defoliation was strong, chlorophyll contents tended to decrease significantly. Reduction of the endogenous nitrogen by defoliation effectively led to promote floral differentiation at low temperature and short day condition. This promoted timing of budding and flowering and also induced uniform flowering after plantlet planting. Marketable fruit yield of 3 leaves defoliation treatment tended to be higher than the control.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.40-51
• /
• 1991

A Propeller design method using the newly developed blade section(KH18), which behaves better cavitation characteristics, is presented. Experimental results for two-dimensional foil sections show that the lift-drag curve and the cavitation-free bucket diagram of the new blade section are wider comparing to those of the existion NACA sections. This characteristic of the new section is particularly important for marine propeller applications since angle of attack variation of the propeller blade operating behind a non-uniform ship's wake is relatively large. A lifting surface theory is used for the design of a propeller with the developed section for a 2700 TEU container ship. Since the most suitable chordwise loading shape is not known a priori, chordwise loading shape is chosen as a design parameter. Five propellers with different chordwise loading shapes and different foil sections are designed and tested in the towing tank and cavitation tunnel at KRISO. It is observed by a series of extensive model tsets that the propeller(KP197) having the chordwise loading shape, which has less leading edge loading at the inner radii and more leading edge loading at the outer radii of 0.7 radius, has higher propulsive efficiency and better cavitation characteristics. The KP197 propeller shows 1% higher efficiency, 30% cavitation volume reduction and 9% reduction of fluctuating pressure level comparing to the propeller with an NACA section. More appreciable efficiency gain for the new blade section propeller would be expected by reduction of expanded blade area considering the better cavitation characteristics of the new blade section.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.124-130
• /
• 2012

The uniform nanofibers of poly(L-lactide-$co$-${\varepsilon}$-caprolactone) (PLCL) with different contents of marine collagen (MC) were successfully prepared by electrospinning method. The effects of the major parameters in electrospinning process such as tip to target distance (TTD), voltage, nozzle size and flow rate on the average diameter of the electrospun nanofiber were investigated in generating composite nanofiber. The diameter and morphology of the nanofibers were confirmed by a scanning electron microscopy (SEM). Also, we measured a water contact angle to determine the surface wettability of the nanofibers. The average diameter of the nanofibers decreased as the value of TTD, MC contents, and voltages increased in comparison with that of pristine PLCL nanofiber. In contrast, the diameter of the nanofibers increased as the flow rate and inner diameter of nozzle increased in comparison with that of pristine PLCL. In addition, the hydrophilicity of the nanofiber and attachment of MG-63 cells on the sheets increased as incorporated collagen contents increased. Therefore, the marine collagen would be a potential material to enhance cellular interactivity of synthetic materials by mimicking the natural tissue.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.401-405
• /
• 2006

A uniform velocity field of crust can be obtained by cumulative multi-year GPS data. Then the shortening and sliding of drape zones between Chinese Continent Blocks can be researched through the velocity field and dynamics meaning is also analyzed. A model of movement and strain is created to extract displacing and rotating information of blocks in this paper. On the basis of it, the shortening vectors and sliding states of drape zones between blocks can be obtained by the model of level center of gravity moving velocity vectors between neighboring blocks. Some result show as follows. India plate jostles greatly toward north, so a complicated movement situation is formed for 14 sub-blocks. And self-deformations of inner tectosomes can be greatly reflected according to the characteristics of drape zones between tectosomes. The extrusion deformation exists between Himalaya and Qiangtang blocks. Its contraction ratio is about 20.1 $mm.a^{-1}$. However, it only is $mm.a^{-1}$ between Tarim and Zhungar. The deformation characteristics and contraction ratio of other drape zones are obviously different with the former. The movement characteristics of contraction, shear, dislocation, etc. are showed in these zones. The average contraction ratio is about 5.0 $mm.a^{-1}$. The whole trend in the west continent has a big movement toward north, and in the east continent has a small movement toward south or southeast. The strain of west continent is far bigger than that of east, and the strain of southwest is bigger than that of the southeast. It is whole showed that India plate jostles toward north-east and the south-north zone has cutting and absorbing phenomena. The total characteristics and present-day trends of deformation of inland drape zones are basically described by the sinistrorse dislocation in south-north zone and Arjin fracture, the sinistrorse shear between south china and north china, etc.

• (The)Study of the Eastern Classic
• /
• no.34
• /
• pp.339-362
• /
• 2009

If we try to define the concept of beauty in the large sense, as Kant and Chaung-tzu all agree, It can not be fixed in the one sense, but whose connotation and denotation should be extended infinitely. In this sense, I would like to say that the beauty is liberty. Aesthetics of Kant is oriented toward subjective and reflexive dimension, while that of Chuang-tzu is oriented toward natural and practical one. The difference between aesthetics of the two philosophers begins from their philosophical methodology. If the transcendental methode which is proper to Kant's philosophy prefers to discriminate and devide everything especially from dichotomic viewpoint by langage. But Chuang-tzu' methode called Za-Mang criticizes such a dichotomic division and langage itself. Even so, the two in the long run agree as to the foundation of beauty. But Kant's liberty is one of will or transcendental, meanwhile that of Chuang-tzu is based on recognize the fact that we are all production of nature. according to Chuang-tzu, in the great beginning, there was non-being. It had neither being nor name. The One originates from it. When things obtain it and come into existence. As the One, Tao is in the excrement and urine. Everything is under the constant flux. All species have originative or moving power. Although the universe is vast, its transformation is uniform. Because all things are one. Vacuity, tranquillity, mellowness, quietness, and taking no action characterize the things of universe at peace and represent the ultimate of Tao and virtue. The material was transformed to be form, form was transformed to become life, and now life has transformed to become death. A basic principle of Chuang-tzu's art is expressed in the phrase "taking off clothes and squatting down bare-backed". The key of Chuang-tzu's aesthetics is to dedicate to the expression of inner spirit instead of physical verisimilitude, and painting should be a spontaneous and instantaneous flow of the brush. Kant's concepts such as "disinterested" and "purposiveness of nature" seem to imply in the long run the unification of nature and human being which is fundament to Chuang-tzu's aesthetics.

• Korean journal of food and cookery science
• /
• v.16 no.1
• /
• pp.47-56
• /
• 2000

The purpose of this study was to develop a drying method of Gangjung. a traditional Korean snack, thus to reduce the drying time and to improve the quality of Gangjung. Two drying methods, hot air drying and far infrared ray drying were used by changing conditions such as air velocity(0.4, 1.2, 1.6 m/s), temperature(40, 50, 60$\^{C}$), and aging. Optimal moisture content of dried Gangjung pellet was 17% which was proper for frying. Cracks appeared on the surface of Gangjung pellet at lower levels of moisture content. Far infrared ray drying saved drying time about 20%. Both hot air drying and far infrared ray drying at 0.4 m/s of air velocity tended to show better quality of Gangjung than those dried at higher air velocities. The expansion volume and texture of Gangjung drying at 40$\^{C}$ was better than other temperature conditions, regardless of drying methods. Quality of Gangjung, dried at single stage without aging, was superior to those dried at double stage including aging process. Moreover, single stage drying save the drying time at least 24 hr. Gangjung dried at high temperature became hard and less brittle in sensory evaluation. In image analysis, air cell distribution in inner structure of Gangjung became uniform and fine as drying temperature decreased to 40$\^{C}$. Overall, Gangjung made of Gangjung pellet by the use of far infrared ray drying at 40$\^{C}$ without aging, showed the best quality in terms of physical and sensory properties.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.3
• /
• pp.44-55
• /
• 1987

In order to study the effect of sawdustboard combined with plastic chips, 0.5mm($T_1$), 1mm($T_2$), 1.4mm($T_3$) thick nylon fiber. polypropylene rope fiber(RP), and 0.23mm thick moth-proof polypropylene net fiber(NP) were cut into 0.5, 1, 2cm long plastic chips. Thereafter, sawdustboard combined with plastic chips prepared as the above and plastic non-combined sawdustboard(control) were manufactured into 3 types of one-, two-, and three layer with 5 or 10% combination level. By the discussions and results at this study, the significant conclusions of mechanical and physical properties were summarized as follows: 1. The MORs were shown in the order of 3 layer> 2 layer> 1 layer among plastic non-combined boards, and $T_3$ < $T_2$ < $T_1$ < RP (NP(5%) < NP(l0%) among plastic combined boards. In 2cm long plastic chip in 1 layer board, the highest strength through all the composition was recognized. 1 layer board showing the lower strength with 0.5cm plastic chip rendered to the bending strength improvement by 2 or 3 layer board composition. On the other hand, 2 or 3 layer combined with 1, 2cm long polypropylene net fiber chips incurred MOR's conspicuous decrease requiring optimum plastic chip combined level and consideration to combined type. 2. MOE in plastic non-combined 3 layer board exhibited sandwich construction effect by higher resin content application to surface layer in the order of 3layer>1layer>2layer with the highest stiffness of the board combined with polypropylene chip, while nylon chip-combined board had little difference from plastic non-combined board. In relevant to length and layer effect, 3 layer board combined with the 0.5cm long polypropylene net fiber chip in 5% and 10% combined level presented 34-43% and 44-76% stiffness increase against plastic non-combined board(control), respectively. Moreover, in 1 layer board, 30% stiffness increase with 10% against 5% combined level in the 1 and 2cm long polypropylene net fiber chip was obtained. 3. Stress at proportional limit(Spl) showing the fiber relationship (r: 0.81-0.97) between MOR presented in the order of 1 layer<2 layer<3 layer in plastic non-combined board. Correspondingly, combined effect by layer and plastic chip length was similar to MOR's. 4. Differently from previous properties(MOR, MOE, Spl). work to maximum load(Wml) of 2 layer board approached to that of 3 layer board. Conforming the above phenomenon. 2 layer combined with 0.5cm long polypropylene net fiber chip kept the greater work than 1 layer. The polypropylene combined board superior to nylon -and plastic non - combined board seemed to have greater anti - failing capacity. 5. Internal bond strength(IB), in contrast to MOR's tendency. showed in the order of T1

• Journal of the Korean association of regional geographers
• /
• v.3 no.2
• /
• pp.121-150
• /
• 1997

This Study puts the purpose to explicate the regionalities of land-lease farming by a comparative analisis of the five case study areas in Kungpook Province as the agricultural space system of Teagu metropolitan city. For the regional comparative analysis the province was divided into the three zones with the distance from the central city(Teagu): urban fringes, intermediate and remote zone, and then subdivided into the five regions by farming systems : horticulture, rice-farming, and dry-field farming. The data were collected from 77 land-leasing farmers by questionnaire and interview with farm managers in 5 sample villages representing the regionalities of the above five regions respectively. In spite of relatively restricted scope of the research areas, the analytical results appear remarkable regional differences in the characteristics of land-lease farming within a single agricultural space system. In the final analysis the regionalities of the five land-lease farming regions could be described respectively as follows. (1) Koryong-Gun in the inner urban fringe zone : The developing land-lease farming region of commercialized suburban horticulture with medium scale. (2) Songju-Gun in the outer urban fringe zone : The developing land-lease farming region of highly commercialized horticulture with large scale. (3) Uisong-Gun in the intermediate zone : The stagnated land-lease farming region of commercialized rice-farming with large scale. (4) Yongil-Gun in the intermediate zone : The stagnated land-lease farming region of commercializing dry-field farming with medium scale. (5) Ponghwa-Gun in the remote zone : The stagnated and delayed region in commercializing of intermountain dry-field land-lease farming with small scale. These varied regionalities resulted from the diverse spatiality as a complex of spatial orders and localities. The spatial orders in this study are frequently recognizable as a form of distance-decay, and the locality of a region is determined mostly by the its peculiarity of physical and population conditions. In the comparative analysis of the regionalities the degree of commercialization of a region is a most comprehensive and useful frame of reference because it reflects the degree of development of capitalist land-lease farming. Finally these apparent regional differentiations of land-lease farming within a agricultural space system raise the problem of impracticality of the existing uniform logic on the land-lease farming such as "large scale farms share larger part of leased farmland." This problem suggests the urgent need of reappraisal of many aspatial logics and theories on the land-lease farming.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.17-24
• /
• 2019

Purpose: The present study aims to assess the level of coherency and the accuracy of Point dose of the Isocenter of VERO, a linear accelerator developed for the purpose of the Stereotactic Body Radiation Therapy(SBRT). Materials and Method: The study was conducted randomly with 10 treatment plans among SBRT patients in Kyungpook National University Chilgok Hospital, using VERO, a linear accelerator between June and December, 2018. In order to assess the equipment's power stability level, we measured the output constancy by using PTW-LinaCheck, an output detector. We also attempted to measure the level of accuracy of the equipment's Laser, kV(Kilo Voltage) imaging System, and MV(Mega Voltage) Beam by using Tofu Phantom(BrainLab, Germany) to assess the accuracy level of geometrical Isocenter. We conducted a comparative analysis to assess the accuracy level of the dose by using an acrylic Phantom($30{\times}30{\times}20cm$), a calibrated ion chamber CC-01(IBA Dosimetry), and an Electrometer(IBA, Dosimetry). Results: The output uniformity of VERO was calculated to be 0.66 %. As for geometrical Isocenter accuracy, we analyzed the error values of ball Isocenter of inner Phantom, and the results showed a maximum of 0.4 mm, a minimum of 0.0 mm, and an average of 0.28 mm on X-axis, and a maximum of -0.4 mm, a minimum of 0.0 mm, and an average of -0.24 mm on Y-axis. A comparison and evaluation of the treatment plan dose with the actual measured dose resulted in a maximum of 0.97 % and a minimum of 0.08 %. Conclusion: The equipment's average output dose was calculated to be 0.66 %, meeting the ${\pm}3%$ tolerance, which was considered as a much uniform fashion. As for the accuracy assessment of the geometric Isocenter, the results met the recommended criteria of ${\pm}1mm$ tolerance, affirming a high level of reproducibility of the patient's posture. The difference between the treatment plan dose and the actual measurement dose was calculated to be 0.52 % on average, significantly less than the 3 % tolerance, confirming that it obtained predicted does. The current study suggested that VERO equipment is suitable for SBRT, and would result in notable therapeutic effect.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.3
• /
• pp.65-75
• /
• 2021

Coin cell is a basic testing platform for battery research, discovering new materials and concepts, and contributing to fundamental research on next-generation batteries. Li metal batteries (LMBs) are promising since a high energy density (~500 Wh kg^-1) is deliverable far beyond Li-ion. However, Li dendrite-triggered volume fluctuation and high surface cause severe deterioration of performance. Given that such drawbacks are strongly dependent on the cell parameters and structure, such as the amount of electrolyte, Li thickness, and internal pressure, reliable Li metal coin cell testing is challenging. For the LMB-specialized coin cell testing platform, this study suggests the optimal coin cell structure that secures performance and reproducibility of LMBs under stringent conditions, such as lean electrolyte, high mass loading of NMC cathode, and thinner Li use. By controlling the cathode/anode (C/A) area ratio closer to 1.0, the inactive space was minimized, mitigating the cell degradation. The quantification and imaging of inner cell pressure elucidated that the uniformity of the pressure is a crucial matter to improving performance reliability. The LMB coin cells exhibit better cycling retention and reproducibility under higher (0.6 MPa → 2.13 MPa) and uniform (standard deviation: 0.43 → 0.16) stack pressure through the changes in internal parts and introducing a flexible polymer (PDMS) film.