• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.1
• /
• pp.82-90
• /
• 2007

We introduce the concept of a remote distributed embedded system to integrated fieldbus based control systems in internet/Intranet. As a result, fieldbus systems are opened up for remote monitoring, remote maintenance, and remote control applications using state of the art Web-technology. This paper addresses the design of a remote distributed embedded system using Internet and CAN for multi-induction motor of Building and Industrial field. The fieldbus used the CAN based networked intelligent multi-motor control system using DSP2812 microprocessor. To build a remote distributed embedded system, the TCP/IP-CAN Gateway which converts a CAN protocol to TCP/IP protocol and vice verse, was designed. A experimental simulation system consists of a TCP/IP-CAN gateway in remote place and a command PC to be connected to Ethernet.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.4
• /
• pp.107-118
• /
• 2007

A single-server queueing model with infinite buffer and batch arrival of customers is considered. In contrast to the standard batch arrival when a whole batch arrives into the system at one epoch, we assume that the customers of an accepted batch arrive one-by one in exponentially distributed times. Service time is exponentially distributed. Flow of batches is the stationary Poisson arrival process. Batch size distribution is geometric. The number of batches, which can be admitted into the system simultaneously, is subject of control. Analysis of the joint distribution of the number batches and customers in the system and sojourn time distribution is implemented by means of the matrix technique and method of catastrophes. Effect of control on the main performance measures of the system is demonstrated numerically.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.2
• /
• pp.190-197
• /
• 2011

In industrial distributed control systems, sensors collect data from the physical environment periodically and transmit them to the actuators, which process the control operations based on the received data. For the effective operation of the control systems, the data transmitted by the sensors has to be delivered to the actuators reliably within the deadline, and if the message reception rate of the actuators becomes lower than a threshold, then the performance of the control systems drops greatly. This paper suggests a message routing protocol to transmit periodic messages reliably in a distributed control system based on wireless sensor networks. For reliable message transmission, the proposed protocol selects a routing path whose end-to-end message reception rate is the highest before transmitting data messages. The proposed protocol has the capability of maintaining a target message reception rate for each flow. To maintain the required target reception rate, each destination monitors the actual message reception rate periodically and transmits a feedback message to the source if it drops below the target reception rate. On receiving the feedback message, the source tries to find a new path which can satisfy the target rate. The performance of the proposed protocol has been evaluated using simulation and compared with other protocols in terms of the message reception rate, the message delay and delay jitter, and so on. The simulation results show that the proposed protocol has a higher message reception rate and comparable message delay and delay jitter to other protocols. The simulation results also show that the proposed protocol has an ability to adapt well to the dynamic network traffic change.

• Journal of Korea Society of Industrial Information Systems
• /
• v.5 no.1
• /
• pp.16-24
• /
• 2000

In the distributed multimedia document system, media objects distributed over a computer network are retrieved from their sources and presented to users according to specifed temporal relations. For effective presentation, synchronization have to he supported. Furthermore, presentation in distributed environments is influenced by network band with and delay, so they have to be considered for synchronization. This paper propose a distributed multimedia presentation model that supports synchronization effectively. In this model, when media objects are transfered from servers to a client, network situation and resources are monitored and thus a feedback message for change of them is sent to sever. Then, the sever adjusts the data sending rate to control synchronization.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.4
• /
• pp.371-376
• /
• 2004

Distributed Network Protocol Version 3.0 (DNP3.0) is the communication protocol developed for the interoperability between a RTU and a central control station of SCADA in the power utility industry. In this paper DNP3.0 is implemented by using HDL with FPGA and C program on Hitachi H8/532 processor. DNP3.0 is implemented from physical layer to network layer in hardware level to reduce the computing load on a CPU. Finally, the ASIC for DNP3.0 has been manufactured from Hynix Semiconductor. The commercial feasibility of the hardware through the communication test with ASE2000 and DNP Master Simulator is performed. The developed protocol becomes one of IP, and can be used to implement SoC for the terminal device in SCADA systems. Also, the result can be applicable to various industrial controllers because it is implemented in HDL.

• ETRI Journal
• /
• v.44 no.6
• /
• pp.991-1003
• /
• 2022

Industrial control systems (ICSs) used to be operated in closed networks, that is, separated physically from the Internet and corporate networks, and independent protocols were used for each manufacturer. Thus, their operation was relatively safe from cyberattacks. However, with advances in recent technologies, such as big data and internet of things, companies have been trying to use data generated from the ICS environment to improve production yield and minimize process downtime. Thus, ICSs are being connected to the internet or corporate networks. These changes have increased the frequency of attacks on ICSs. Despite this increased cybersecurity risk, research on ICS security remains insufficient. In this paper, we analyze threats in detail using STRIDE threat analysis modeling and DREAD evaluation for distributed control systems, a type of ICSs, based on our work experience as cybersecurity specialists at a refinery. Furthermore, we verify the validity of threats identified using STRIDE through case studies of major ICS cybersecurity incidents: Stuxnet, BlackEnergy 3, and Triton. Finally, we present countermeasures and strategies to improve risk assessment of identified threats.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.10a
• /
• pp.133-137
• /
• 1996

This paper presents a new approach to the design of neural control system using digital signal processors in order to improve the precision and robustness. Robotic manipulators have bevome increasingly important in the field of flexible automation. High speed and high-precision trajectory tracking arre indispensable capabilities for their versatile application. the need to meet demanding control requirement in increasingly complex dynamical control systems under sygnificant uncertainties leads toward design of implementing real time neural control to provide an enhanced motion control for robotic manipulators. In this control scheme the ntworks intrduced are neural nets with dynamic neurouns whose dynamics are distributed over all the network nodes. The nets are trained by the distributed dynamic are distributed over all the network nodes. The nets are trained by the distributed dynamic back propagation algorithm. The proposed neural network control scheme is simple in structure fast in computation and suitable for implementation of real-time control, Performance of the neural controller is illustrated by simulation and experimental results for a SCAEA robot.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.2
• /
• pp.170-183
• /
• 2007

This paper presents a delay-dependent approach to robust filtering for linear parameter-varying (LPV) systems with discrete and distributed time-invariant delays in the states and outputs. It is assumed that the state-space matrices affinely depend on parameters that are measurable in real-time. Some new parameter-dependent delay-dependent stability conditions are established in terms of linear matrix inequalities (LMIs) such that the filtering process remains asymptotically stable and satisfies a prescribed $H_{\infty}$ performance level. Using polynomially parameter-dependent quadratic (PPDQ) functions and some Lagrange multiplier matrices, we establish the parameter-independent delay-dependent conditions with high precision under which the desired robust $H_{\infty}$ filters exist and derive the explicit expression of these filters. A numerical example is provided to demonstrate the validity of the proposed design approach.

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.3
• /
• pp.12-20
• /
• 2002

As numerous sensors and actuators are used in many automated systems, various industrial networks are adopted for real-time distributed control. In order to take advantages of the networking, however, the network implementation should be carefully designed to satisfy real-time requirements considering network induced delays. This paper presents an implementation scheme of a networked control system via Profibus-DP network fur real-time distributed control. More specifically, the effect of the network induced delay on the control performance is evaluated on a Profibus-DP testbed. Also, two conventional PID gain tuning methods are slightly modified fur fouling controllers fur the networked control system. With appropriate choices for gains, it is shown that the networked control system can perform almost as well as the traditional control system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.77.2-77
• /
• 2001

Profibus-DP is the performance-optimized version of Profibus, specifically dedicated to time-critical communication between automation systems and distributed peripherals. It is included into the International Fieldbus Standard IEC 61158. In this paper, The ASIC for Profibus-DP simple and intelligent slave is proposed and implemented. It can be fully compatible with Siemens LSPM2 as a pin-to-pin base and it also has a high-level function that can replace current intelligent slave boards with one chip. Also it can be used without special OS coding unlike SPC3 of Siemens.