• International Journal of Internet, Broadcasting and Communication
• /
• v.8 no.1
• /
• pp.64-68
• /
• 2016

These fields are integrated to visualize and finalize the proposed development, in simulation environment. SCADA (supervisory control and data acquisition) systems and distributed control systems (DCSs) are widely deployed in all over the world, which are designed to control the industrial infrastructures, in real ways. To supervise and control the various parts of designed systems; trends to require a deep knowledge to understand the overall functional needs of industries, which could be a big challenge. Industrial field devices (or network sensors) are usually distributed in many locations and are controlled from centralized site (or main control center); the communication provides various signs of security issues. To handle these issues, the research contribution will twofold: a method using cryptography is deployed in critical systems for security purposes and overall transmission is controlled from main controller site. At controller site, multimedia components are employed to control the overall transmission graphically, such as system communication, bytes flows, security embedded parameters and others, by the means of multimedia technology.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.12 no.19
• /
• pp.89-98
• /
• 1989

This research addresses the most sophisticated level of complexity of current electronic data processing(EDP) technology realtime, distributed data base(DDB) system. The major objective is to develop guidelines for the control and audit of these sophisticated system, since the control and audit philosophies, control features, and audit techniques applicable to traditional EDP systems are no longer fully appropriate for, or relevant to, these stat-of-art systems. An attempt is made to develop an internally consistent audit and control Conceptual Framework summarizing and integrating the material developed in this research, which then leads into the analysis of the control and audit model.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.113-117
• /
• 2003

In the industrial field nowadays the information that needs to be handled arc increasing and requires faster speed in contrast with PLC(Programmable Logic Controller) or DCS(Distributed Control System) based control systems these days. The work environment these days are mostly based on PC, so the control systems are wanted in PC. At Fieldbus used automated systems performing distributed process control by PC performs and combines into one system in order to maximize the increase of productivity, lower the expense, planning constructing and maintaining the reliance of automation. These latest automation systems unites process, makes distributed control process able, and can control and supervise at remote PC.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1043-1048
• /
• 1990

The degenerate case of multivariable hyperbolic distributed-parameter systems (systems of hyperbolic partial differential equations) in time coordinate t and space coordinate x is characterized by a property that all the characteristic curves of the state equations are parallel to the coordinate axes of independent variables. It is a disturbing fact, although not well known, that the so-called maximum principle as applied to these systems does not exist for the control that depend on time alone. In this paper, however, it is shown that a set of necessary conditions in the small can exist for unconstrained as well as magnitude constrained controls in a locally convex set. The necessary conditions thus derived can be used conveniently to find the optimal control for degenerate hyperbolic distributed-parameter control systems.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.2
• /
• pp.282-287
• /
• 2008

In distributed mobile robot systems, autonomous robots accomplish complicated tasks through intelligent cooperation with each other. This paper presents behavior learning and online distributed evolution for cooperative behavior of a group of autonomous robots. Learning and evolution capabilities are essential for a group of autonomous robots to adapt to unstructured environments. Behavior learning finds an optimal state-action mapping of a robot for a given operating condition. In behavior learning, a Q-learning algorithm is modified to handle delayed rewards in the distributed robot systems. A group of robots implements cooperative behaviors through communication with other robots. Individual robots improve the state-action mapping through online evolution with the crossover operator based on the Q-values and their update frequencies. A cooperative material search problem demonstrated the effectiveness of the proposed behavior learning and online distributed evolution method for implementing cooperative behavior of a group of autonomous mobile robots.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.778-784
• /
• 2017

In this paper, we propose wired and wireless distributed control systems designed to improve the freight logistics efficiency and verify wired distributed control systems. The verification condition required that 50 cargo vehicles be connected and operated to travel 21 km from Busan Sinhang station to Jinlye Station at an average speed of about 100km/h. The verification results show that the traction output and braking output of the control and controlled cars are dispersed by the wired distributed control system. The application is expected to more than double the efficiency of the logistics compared to the existing freight transportation system. However, in the case of the wired distributed control system, cable installation and maintenance are difficult, and it is impossible to change the combination of freight vehicles. Through the verification of the wired distributed control system, the applicability of distributed control systems to freight vehicles in Korea was confirmed and the system was further developed to produce a wireless distributed control system. In order to apply the wireless distributed control system, a propagation environment analysis for the ISM band was performed in the testbed and, as a result, it was confirmed that Wifi technology using the ISM band could be utilized. In order to use the WDP (Wireless Distributed Power) devices newly installed in the target vehicles, the transmission / reception control signals associated with the propulsion / braking / total control devices are defined. In the case of wireless distributed control systems, the convenience of their application and operation is guaranteed, but reliability and emergency safety measures should because of the dependence of the control of the vehicle on radio signals.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.1
• /
• pp.1-9
• /
• 2022

The PoN (Proof of Nonce) distributed consensus algorithm basically uses a non-competitive consensus method that can guarantee an equal opportunity for all nodes to participate in the block generation process, and this method was expected to resolve the first trilemma of the blockchain, called the decentralization problem. However, the decentralization performance of the PoN distributed consensus algorithm can be greatly affected by the network transaction transmission delay characteristics of the nodes composing the block chain system. In particular, in the consensus process, differences in network node performance may significantly affect the composition of the congress and committee on a first-come, first-served basis. Therefore, in this paper, we presented a problem by analyzing the decentralization performance of the PoN distributed consensus algorithm, and suggested a fairness control algorithm using a learning-based probabilistic acceptance rule to improve it. In addition, we verified the superiority of the proposed algorithm by conducting a numerical experiment, while considering the block chain systems composed of various heterogeneous characteristic systems with different network transmission delay.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.3-9
• /
• 2008

Recently, the plant industries are being activated and plant control systems use various technologies. Because the optimized design for the plants is very important for the reducing of operation and maintenance costs, automatic control systems become more important. Plant control systems consist of the master controller, the plant networks, the programming environment for engineering, monitoring software and the field devices. The control systems should have reliability, availability and safety. Modular architecture of hardware and software makes flexible configuration of the control systems. Each component should have diagnostic functions. It follows industrial standards and makes open systems. Open systems increase accessibility against the data which is distributed in the plants. The controllers including processor and communication modules use the up-to-date technology. They have real time and fault tolerant function by duplicating processors or networks. It also enables to make the distributed control systems. The distributed architecture makes more scalable main control system. Automatic control systems can be operated with better performance. In this paper, we analyzed the requirements of the seawater desalination plants and made some consideration facts for developing the optimized controller. Also we described the design concept of the main controller, which consists of several modules. We should validate and complement the design for the reliability and better performance.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.302-308
• /
• 2006

We introduce the concept of a remote distributed embedded system to integrated fieldbus based control systems in internet/Intranet. As a result fieldbus systems are opened up for remote monitoring, remote maintenance, and remote control applications using state of the art Web-technology. This paper addresses the design of a remote distributed embedded system using Internet and CAN for multi-Induction motor of Building and Industrial field. The fieldbus used the CAN based networked intelligent multi-motor control system using DSP2812 microprocessor. To build such a system, the TCP/IP-CAN Gateway which convert a CAN protocol to TCP/IP protocol and vice verse, was designed. A experimental simulation system consists of a TCP/IP-CAN Gateway in remote place and a command PC ti be connected ti Ethernet.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.10
• /
• pp.911-917
• /
• 2000

As many sensors and actuators are used in various automated systems, the application of network to real-time distributed control system is gaining acceptance in many industries. In order to take advantages of networking, however, the network should be carefully designed to satisfy real-time distributed control. This paper presents an implementation method of closed-loop control using Profibus-FMS. In order to implement a closed-loop control system, we used industrial computers with Profibus-FMS network cards and a DC servo motor. Through various experiments, the step response of the control system with network was compared with the reference response without network.