• 한국산학기술학회논문지
• /
• 제13권4호
• /
• pp.1895-1899
• /
• 2012

유한차분법을 적용한 압밀해석을 수행하였는데 순간하중이 재하되는 경우 유한차분법에 의해 예측되는 시간별 침하량과 Terzaghi 방법에 의한 침하량 사이의 차이는 시간격자간격을 충분히 작게 하여 해결할 수 있음을 알 수 있었다. 점증하중에 대한 압밀해석을 위한 유한차분식을 유도하였는데 해석결과에 따른 과잉간극수압의 분포가 Olson의 이론해와 일치하였다. 점증하중이 작용하는 경우에 대해 예측한 시간-침하거동에 있어 유도된 유한차분식에 의한 결과와 Terzaghi 및 Olson 에 의한 결과 또한 거의 일치하였다. 다단 점증하중에 대한 해석결과 또한 신뢰성이 높은 것으로 보인다.

• 대한안전경영과학회지
• /
• 제20권3호
• /
• pp.1-9
• /
• 2018

This study is intended to look into the effect of construction safety supervision system on risk control and reduction. To achieve this, a survey was carried out to 114 companies in construction, ordering, contract and management. The overall findings were as follows. The effect of construction safety supervision system on risk control and reduction showed that factors of supervision system, supervision cost and supervision method had a positive effect on risk control and reduction. And their perception of the introduction of safety supervision system in construction sites according to process showed that there was a difference between them according to the field of ordering, contract and supervision. There was the biggest difference between owner and contractor in double supervision system, but no difference between them in the perception of risk reduction. These results show that all ordering, contract and supervision are positively needed for the introduction of construction safety supervision. This means that there is a difference between owner and contractor in the perception of process according to system operation. All companies agree to system improvement by the settlement of safety supervision system for the prevention of safety accidents and safe construction, but the systematic complement of safety supervision is the burden of contractor. And there is a big difference between owner and contractor in the perception of responsibility and concern for cost burden.

• Current Optics and Photonics
• /
• 제5권2호
• /
• pp.173-179
• /
• 2021

The electroluminescence (EL) intensities of GaN-based light-emitting diodes (LEDs) are estimated based on their photoluminescence (PL) properties. The PL intensity obtained under open-circuit conditions is divided into two parts: the PL intensity under a forward bias lower than the optical turn-on voltage, and the difference between the PL intensities under open-circuit conditions and under forward bias. The luminescence induced by photoexcitation under a constant forward bias lower than the optical turn-on voltage is primarily the PL from the excited area of the LED. In contrast the intensity difference, obtained by subtracting the PL intensity under the forward bias from that under open-circuit conditions, contains the EL induced by the photocarriers generated during photoexcitation. In addition, a reverse photocurrent is generated during photoexcitation under constant forward bias across the LED, and can be correlated with the PL-intensity difference. The relationship between the photocurrent and PL-intensity difference matches well the relationship between the injection current and EL intensity of LEDs. The ratio between the photocurrent generated under a bias and the short-circuit current is related to the ratio between the PL-intensity difference and the PL intensity under open-circuit conditions. A relational expression consisting of the ratios, short-circuit current, and PL under open-circuit conditions is proposed to estimate the EL intensity.

• 산업경영시스템학회지
• /
• 제25권3호
• /
• pp.9-15
• /
• 2002

Due to the inconsiderateness of human capability and inappropriate arrangement of display and control unit at the industrial site, the human error leads to a various accidents. This study was performed to investigate the visual range at the eye field and stationary field at the various angles with three different visual stimuli of alphabetic character, color slip and light-emitting diode. Three kinds of various alphabetic characters depending on length and breadth ratio (1:1, 3:5, 5:3) and three different colors (red, yellow, green) were used for the stimuli. Twenty-five subjects (11 males and 14 females) participated for this study. The results showed that female had wider visual range than male at the eye field, however no significant difference was found at the stationary field. The light-emitting diode had a widest visual range then color slip and characters are in order at the eye field and stationary field. For the character stimulus, the widest visual range was shown at length and breadth ratio of 1:1. The other ratios (3:5 and 5:3) showed no significant difference. The color of red had a widest visual range on the light-emitting diode, however, the color of yellow showed a widest visual range on the just color slip at the eye field. The result of this study would be valuable in applying to the design of visual display and the panel layout of control and displays in the industrial site.

• 재활간호학회지
• /
• 제12권1호
• /
• pp.30-38
• /
• 2009

Purpose: The purpose of this study was to compare the rehabilitation nursing services what nurses recognize to be important and what they do in practice of the industrial workers. Method: The subjects were 150 nurses who were working at the industrial hospital. The questionnaire was made up with 43 items about the perception on importance and performance of rehabilitation services. Result: The highest services in the perception on importance and performance subscale were physical and therapeutic services. The highest difference between perception on importance and performance was the social and occupational services. The perception on importance of rehabilitation services had positive correlation with performance. The group take care of general patients had a higher level of perception on importance than the other group, and level of performance had significant difference with age and position. Conclusion: We need to develop the strategy for promoting the performance of services that recognize it will be important services, but not to do. Further study on system for promoting the nurse practitioner who responsible for rehabilitation nursing.

• 산업경영시스템학회지
• /
• 제26권4호
• /
• pp.1-5
• /
• 2003

This paper is for standard of South and North Korea clothing, especially size. It is analysis and make a comparative study of KS K 0050-0052 which is South Korea industrial standard) and KPS 8477.1∼3, 8477.6, 8477.9, 10253 which is North Korea's. With this research, it is found the difference and sameness, then this paper suggests the method for combining two different standard systems.

• Journal of Biosystems Engineering
• /
• 제36권6호
• /
• pp.453-460
• /
• 2011

This study was carried out to test a red pepper tedding factors which is needed for design and development of an auto-tedding machine and a performance. According to this test, the results can be summarized as follows: The results of the tedding factors test according to shape of rotary blade, which is the 0.4 to 0.5 mm brush type, was found to be the most appropriate. As a result of tedding ratio which includes brush diameters, driving velocities and rotation velocities, there was generally no significance difference, but the red pepper tedding efficiency was found to be 39.7%. The moisture drying rate of red pepper was found to be 0.9 %w.b./h in prototype auto-tedding machine and 0.4 %w.b./h in traditional practice. The drying time was found to be 3 days in prototype auto-tedding machine and the traditional practice was 6 days. The average variable coefficient of the red pepper moisture content was found to be 16.8% in prototype auto-tedding machine in comparing with the traditional practice of 35.0%. This test showed a difference around two times, and this difference was evaluated to be the reason for irregular drying and different drying times.

• 한국산업보건학회지
• /
• 제7권1호
• /
• pp.71-85
• /
• 1997

The purpose of this study was to evaluate concentrations of organic solvent mixtures in air of rotogravure printing workplaces. Qualitative and quantitative analysis of organic solvents contained in the gravure inks used at rotogravure factories had been done. The results obtained were as follows: 1. The gravure inks mainly consist of toluene, methyl ethyl ketone(MEK), and ethyl acetate(EA), and traces of isopropyl alcohol(IPA), xylene, 2-butanol, cyclohexane, cellosolve etc were also contained in them. 2. Thinner used as a diluent consist of toluene, MEK, and EA. 3. Geometric mean concentration of toluene in ambient air were 23.81 ppm at gravure printing of packing material, 42.10 ppm at gravure printing of wallpaper, 16.95 ppm at gravure printing of plastic bottle for beverage and 4.31 ppm at gravure printing of plywood printing or floor covering. Concentrations of toluene in ambient air showed statistically significant difference between types of printing. 4. Concentrations of MEK in ambient air were 12.43 ppm at gravure printing of packing material, 5.47 ppm at gravure printing of wallpaper, 16.78 ppm at gravure printing of plastic bottle for beverage and 16.44 ppm at gravure printing of plywood printing or floor covering. MEK concentrations in ambient air showed no significant difference. 5. Conentrations of EA were 14.30 ppm at gravure printing of packing material, 1.92 ppm at gravure printing of wallpaper and 21.12 ppm at gravure printing of plywood printing or floor covering. EA concentrations in ambient air shown significant difference. 6. Percentage of the workplaces where the ambient air concentration of organic solvent mixtures exceeded the Korean Permissble Exposure Level(KPEL) amounted to 18.03%. 7. Toluene concentrations in ambient air of rotogravure printing workplaces ranged from 0.69 to 156.02 ppm and urinary hippuric acid excretion ranged from 0.10 to $1.32g/{\ell}$.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제20권1호
• /
• pp.1-15
• /
• 2016

The continuous analysis, such as smoothness and uniform convergence, for polynomials and polynomial-like functions using differential operators have been studied considerably, parallel to the study of discrete analysis for these functions, using difference operators. In this work, for the difference operator ${\nabla}_h$ with size h > 0, we verify that for an integer $m{\geq}0$ and a strictly decreasing sequence $h_n$ converging to zero, a continuous function f(x) satisfying $${\nabla}_{h_n}^{m+1}f(kh_n)=0,\text{ for every }n{\geq}1\text{ and }k{\in}{\mathbb{Z}}$$, turns to be a polynomial of degree ${\leq}m$. The proof used the polynomial convergence, and additionally, we investigated several conditions on convergence to polynomials.

• 산업기술연구
• /
• 제28권B호
• /
• pp.101-109
• /
• 2008

In general, non-stationary or chaos time series forecasting is very difficult since there exists a drift and/or nonlinearities in them. To overcome this situation, we suggest a new prediction method based on multiple model TS fuzzy predictors combined with preprocessing of time series data, where, instead of time series data, the differences of them are applied to predictors as input. In preprocessing procedure, the candidates of optimal difference interval are determined by using con-elation analysis and corresponding difference data are generated. And then, for each of them, TS fuzzy predictor is constructed by using k-means clustering algorithm and least squares method. Finally, the best predictor which minimizes the performance index is selected and it works on hereafter for prediction. Computer simulation is performed to show the effectiveness and usefulness of our method.