• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.03a
• /
• pp.258-261
• /
• 1998

Induction heating is commonly used in process heating prior to metal working and in heat treationg, welding, and melting. For an analysis of induction heating system, it is necessary to calculate eddy currents in conductors induced by a source current. This study examines the use of the Impedance Boundary Condition for the reduction of the field problem encountered in the computation of eddy currents in non-magnetic and magnetic conductors with small penetration depths to a simpler exterior problem. The electric field intensities on the conductor surfaces computed by using the IBC are compared with the values obtained from the full region solution (i.e. without the use of IBC) and those agree well with the latter.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.1
• /
• pp.63-68
• /
• 2004

Recently ER fluids are put to practical use in fluid power industry field. As only with electrical signal change to the valve in which ER fluid flowing, ER fluid flow is controlled, so devepment of simple ER valves have been tried. In this case a technical problem is to check the pressure drop caused from flow rate change in valves because the pressure drop is very small. In this study ER valves are designed and manufactured, and small pressure drop induced from flow rate change is checked by pressure transducer which is made with appling strain gage. The ER valves and pressure drop check method are considered to be applied to the fluid power industry.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1004-1009
• /
• 2003

Electroosmotic flow induced by an applied electrostatic potential field in microchannel is analyzed in this study. The electroosmotic flow is an alternative to pressure driven flow in microchannels, but the usage has been limited to the simple cases. In this study, We analyze electroosmotic flow driven by inhomogeneous surface charge on the channel wall. The surface charge varies along a direction perpendicular to the electric field in order to generate the electroosmotic flow. A numerical results substantiate the highly efficient mixing performance. It is highly the beneficial to fabrication process since only straight microchannel rather than complex geometry is enough to yield efficient mixing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.764-767
• /
• 2005

Photoaligning polymers usually possess "sofe" surface, containing flexible groups and provide relatively small anchoring energy($W<10^{-2}$ erg $cm^{-2}$). In this case field-induced reorientation of director on the aligning surface is essential. We have shown that surface director reorientation can modify the aligning surface and result in gliding of the axis of easy orientation of LC. this phenomena together with adsorption/desorption of ions in electric field cause strong sticking effect in LCDs photoaligning materials. We proposed a method of decreasing of the sticking effect based on irradiation of the photoaligning surface by an unpolarized light.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.213-215
• /
• 1987

In this paper, influences or grain size on the electro-optic properties were studied on the penferroelectric PLZT ceramics. The specimens were fabricated by the two stage sintering method. Relative permittivity was a little increased with the increment or grain size in 9,9.5/65/35 (La/Zr/Ti) PLZT specimens, and Curie temperature was decreased in the 9.5/65/35 specimens but constant in the 9.5/65/35 specimens. As the grain size was increased, field induced polarization and dP/dE were increased. Because domain walls can be easily moved by electric field. Light transmittance was increased in the 9/65/35 PLZT specimens but there was little effect on the grain size in the 9.5/65/35 PLZT specimens.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.272-273
• /
• 2001

We demonstrate the first separation of neutral molecules using optical forces. Unlike laser atomic cooling or optical tweezers, optical separation technique requires the manipulation of only one component of the molecular motion. Thus the mixtures can be separated, in principle, with less complex schemes. When an Intense nonresonant laser beam is focused onto a beam of molecules, the interaction between the laser electric field and the induced dipole moment of a molecule invokes a mechanical force on the molecule proportional to the field gradient and the molecular polarizability ($\alpha$) to mass (m) ratio $\alpha$/m. (omitted)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.435-438
• /
• 1998

In this paper, Electret is formed to range voltage -5[kV] to -8[kV] by corona charging in PTFE film and sensor is manufactured by method of moments in sensing infra sonic. Charges of charged film are calculated also TSC measurement and induced potential of sensing electrode according to the charges is become aware of computer simulation. Electret Infra Sonic Transducer, which is designed and manufactured according to the potential and electric field simulation in using method of moments, is proved as it is effectively. Because sensitivity that measured under 10[Hz] is that average value of sensitivity rising rate is 6.34 [dB/oct] as average value is $\pm$1 [dB/oct] range -5[kV] to -8[kV] in corona charging film. As a result, it is believed that characteristic of acquired transducer can be application of medical treatment, industry, and animal life researches and the study of noise elimination, what's more, is required.

• Macromolecular Research
• /
• v.15 no.5
• /
• pp.396-402
• /
• 2007

The dielectric properties and various pattern-forming states of dual-frequency material in a nematic phase, as well as its mixture containing low concentrations of reactive monomers, are reported. The dielectric relaxation behaviors of nematic MLC 2048 are presented and compared to its mixture containing both mesogenic and nonmesogenic reactive monomers. The sign-inversion frequency of the dielectric anisotropy was significantly shifted on the addition of small amounts of the reactive monomers. However, all three mixtures used in this study essentially exhibited the same field-induced instabilities at different frequencies and voltage domains of the applied electric field. A broad band of modulated states were found to exist above a critical voltage and within a voltage dependent frequency band in the vicinity of the sign-inversion frequency, $f_I$, of the dielectric anisotropy. As the $f_I$ of the mixtures shifted, so did the bands of the modulated state of the different mixtures and the temperatures, which were well matched with the measured $f_I$ value.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.271-271
• /
• 2010

고효율 실리콘 태양전지를 제작하기 위하여 surface passivation, 레이저와 lithography기술들이 연구되어 지고 있다. 결정질 실리콘 태양전지의 기판의 두께가 점점 얇아지면서 surface-to-volume 비율이 증가되어 surface passivation은 매우 중요하다. surface passivation은 크게 2가지 방법으로 진행되고 있으다. 첫 번째는 Si의 dangling bond의 passivation과 surface recombination process 제어에 기초를 두고 있다. 일반적으로 박막을 이용한 실리콘 passivation은 $SiO_2$, SiN, a-Si, $Al_2O_3$박막 4가지가 이용되어 왔다. 본 연구에서는 p-type SoG기판위에 원자층 증착법(ALD)을 이용하여 $Al_2O_3$박막의 negative fixed charge의 internal electric field로 surface passivation을 연구하였다. TMA와 $H_2O/O_3$을 사용하여 ALD $Al_2O_3$를 10~30nm두께를 갖도록 증착하였다. 표면 처리 조건, $Al_2O_3$박막 두께, ALD 공정 조건과 후열처리등에 따른 실리콘의 특성, carrier lifetime변화를 측정하여 효과적인 field induced passivation을 제시하고자 한다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.6
• /
• pp.342-347
• /
• 2016

We investigated the effect of $Bi_{1/2}(Na_{0.82}K_{0.18})_{1/2}TiO_3$ (BNKT) modification on the ferroelectric and electric-field-induced strain (EFIS) properties of lead-free $0.97Bi_{1/2}(Na_{0.82}K_{0.18})_{1/2}TiO_3-0.03LaFeO_3$ (BNKTLF) ceramics as a function of BNKT content (x= 0, 0.1, 0.2, 0.3, 0.5, and 1). BNKT-modified BNKTLF powders were synthesized using a conventional solid-state reaction method. As the BNKT content x increased from 0 to 1 the normalized electric-field-induced strain ($S_{max}/E_{max}$) was observed to increase at relatively low fields, i.e., below the poling field. Moreover, BNKTLF-30BNKT showed about 460 pm/V as low as at 3 kV/mm, which is a considerably high value among the lead-free systems reported so far. Consequently, it was confirmed that ceramic-ceramic composite, a mixture of an ergodic relaxor matrix and embedded ferroelectric seeds, is a salient way to make lead-free piezoelectrics practical with enhanced EFIS at low field as well as less hysterical.