• 한국컴퓨터산업교육학회:학술대회논문집
• /
• 한국컴퓨터산업교육학회 2003년도 제4회 종합학술대회 논문집
• /
• pp.95-98
• /
• 2003

Power semiconductors are being currently used as a application of intelligent power inverters to a refrigerator, a washing machine and a vacuum cleaner as well as core parts of industrial system. The rating of semiconductor devices is an important factor in decision on the field of application and the forward blocking voltage is one of factors in decision of the rating. The Power MOS device has a merit of high input impedance, short switching time, and stability in temperature as well known. Power MOS devices are mainly used as switches in the field of power electronics, especially the on-state resistance and breakdown voltage are regarded as the most important parameters. Power MOS devices that enable a small size, a light weight, high-integration and relatively high voltage are required these days. In this paper, we proposed the new lateral power MOS which has forward blocking voltage of 250V and contains trench electrodes and verified manufactural possibility by using TSUPREM-4 that is process simulator.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.177-181
• /
• 1998

In this paper, we used the $BaTiO_3$ system ceramics with high temperature stability for high voltage devision, and rosen type-piezoelectric transformer for high voltage measurement. when Line-high voltage is 13,20O[V], Input voltage of piezoelectric transformer type-actuator is about 390CV1, and output voltage of it is 26.5FVI on the no-load. And also, temperature stability from >$-25^{\circ}C$ to >$50^{\circ}C$ is less than ${\pm}4.45%$

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2335-2341
• /
• 2009

High technique growth of modem times and high industrial facility in consequence of buildings demand for electric power of an extensive scale with stability supply and maintenance of high quality. But, power system always have risk of network contingency. When power system break out disturbance, it circumstantially happen like uncontrolled loss of load developing from of cascading. Severely which would be raised wide area blackout, plan to prevent, which make stability through a little of load shedding and multi-level UnderVoltageLoadShdding should work. This paper presents target, sensitivity of bus voltage have choose appropriating load shedding location and load shedding decision making logic with considering rate of change of voltage have studied multi-level under voltage load shedding scheme. Calculation of rate of change of voltage applied method of least square. As a result, we are studied an dynamic analysis of 2008 summer peak data. We have been known that network analysis is a little development and developing UnderVoltageLoadShedding scheme.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.429-432
• /
• 2017

본 논문에서는 고성능 비교기를 이용한 전파정류 애너지 하베스팅 회로를 설계하였다. 설계된 회로는 크게 Negative Voltage Converter, Active Diode단으로 나뉜다. 그리고 Active Diode단에 포함된 비교기는 3-stage 형태로 구현 하였으며 Pre-amplification, Decision circuit, Output buffer단으로 나뉜다. 이 비교기는 Propagation delay를 줄이고 하베스팅 회로의 전압 및 전력 효율을 향상 시키는 것이 주된 목적이다. 제안된 회로는 Magna $0.35{\mu}m$ CMOS 공정으로 설계하였으며, 모의실험을 통해 동작을 검증하였다. 설계된 에너지 하베스팅 회로의 칩 면적은 $612{\mu}m{\times}444{\mu}m$이다.

• 전기학회논문지
• /
• 제65권9호
• /
• pp.1571-1576
• /
• 2016

A Tesla coil is an electrical resonant transformer circuit invented by Nikola Tesla in 1891. It is used to produce high-voltage, low-current, high frequency alternating-current electricity. Tesla coil can generate a long streamer with several million volts of electricity as a high voltage device. It is basically consists of a voltage transformer, high voltage capacitor, spark gap, primary coil, secondary coil and toroid. It is difficult to appear in the output size of the streamer is controlled by the spark gap. The general decision method of the length of streamer is to display the electric output in accordance with the design specifications in initial development plan. Design specifications and the electric output is determined by the application of facilities. In this paper the spark gap is replaced with periodic switching semiconductor device to control output voltage easily in order to apply overvoltage protective circuit due to a secondary coil and a performance test. In these days, their main use is for entertainment and educational displays of the museum, although small coils are still used as leak detectors for high vacuum systems.

• 전기학회논문지P
• /
• 제56권3호
• /
• pp.148-154
• /
• 2007

In this paper, characteristics of ignition voltage and current by wire length of HID(High Intensity Discharge) lamp circuit are analyzed. In the construction field, decision of the wire thickness for HID lamp circuit has the problems, and these are presented. Through transmit parameters, equivalent model of the ballast and HID lamp circuit was derived. The graph of voltage reduction about length between the ballast and the lamp is shown. The simulation of proposed model and experimental results are presented in order to validate the proposed method. The proposed model and graph can use to choose the proper length of wire between the ballast and the lamp in the field.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.174-176
• /
• 2007

Because of accident or leak of electricity, high voltage electricity can be conducted to vehicle chassis and damage human. Therefore the unit for detecting ground fault is necessary to minimize loss of life or equipment damage. Isolation resistance must be monitored for detecting ground fault. GFD(Ground Fault Detection) unit continually generate the pulse voltage between high voltage network and chassis. This will be sensing the returned current, calculate the isolation resistance and make decision the ground fault. This paper describes the method detecting ground fault.

• 한국전기전자재료학회논문지
• /
• 제19권10호
• /
• pp.942-946
• /
• 2006

We simulated insulation defects of stator winding wire on high voltage generator by 5 types. 4 types have one discharge source and other one has multi discharge source by simulation. For accurate decision, measurements used to PRPD pattern to occurred partial discharge source of various types. In this research, when PRPD pattern carried out or analyzed pattern recognition of discharge source, it used to powerful tools. In this result, PRPD Pattern defined to have single discharge source of 4 types by insulation defect. When insulation defect simulated, all the defected winding have not the same result. Errors for a little different can make mistakes from a subtle distinction. The difference between internal and void discharge have magnitude of pulse amplitude of inner discharge bigger than void discharge and have a shape of bisymmetry. But void discharge has a shape of bisymmetry against maximum value on polarity respectively. In cases of slot and surface discharge, we confirmed to show similar results those other researchers. In case of multi-discharge, as a result of we could classify not perfect match with occurred patterns in single discharge eachother. In the future, we will have to recognize and classify with results of multi-discharge.

• 대한전자공학회논문지SD
• /
• 제48권1호
• /
• pp.31-38
• /
• 2011

고속 전송 시스템에 대한 수요가 증가함에 따라 채널의 제한된 대역폭을 극복하기 위한 적응형 등화기가 수신기에 널리 사용되고 있다. 수신기 칩의 테스트 비용을 절감하기 위하여 칩 내부에서 데이터의 아이 열림 정도를 측정할 수 있는 온 칩 eye-opening monitoring (EOM) 기술이 사용될 수 있다. 본 논문에서는 EOM 기능을 탑재한 10Gb/s 적응형 2탭 look-ahead decision feedback equalizer (DFE)를 제안한다. 제안된 EOM 회로는 기존의 방식과 달리 look-ahead DFE의 등화 신호를 모니터링 할 수 있다. 수신 신호의 아이로부터 포스트 커서의 크기를 측정한 후, 등화 계수가 제안된 알고리즘에 의하여 계산된다. 제안된 회로는 90nm CMOS 공정에 설계되었으며 알고리즘과 함께 post-layout 시뮬레이션을 통하여 동작을 검증하였다. DFE 코어논 $110{\times}95{\mu}m^2$의 면적을 가지고 1.2V의 전원에서 11mW를 소모한다.

• 조명전기설비학회논문지
• /
• 제28권10호
• /
• pp.75-81
• /
• 2014

When the large-capacity Mold type Transformer was passed through rain, after it was dried and it's parts were changed, Insulation Diagnosis was made to evaluate the condition of it and decide to recharge. Using the evaluation of Insulation Diagnosis, the urgent decision-making for recharge made blackout time minimum. In this study, it was considered that Insulation Diagnosis for the large-capacity Mold type Transformer is applied to decision-making for reuse of high voltage electric power equipment by analysis of the case study.