• 드라이브 ㆍ 컨트롤
• /
• 제15권4호
• /
• pp.30-38
• /
• 2018

Electronic control units (ECUs) are currently popular, and have evolved further towards the high-end application of autonomous vehicles in the automotive industry. Such digital technologies have also become widespread, in agriculture and construction equipment. Likewise, transmission control of high-speed tracked vehicles is based on the transmission control unit (TCU), performing complex gear change control functions, and diagnostic algorithms (a TCU's self-diagnostic and reporting capability of malfunction data through CAN communication). Since all functions of TCU are implemented by embedded-software, it is hardly possible to analyze specifications by reverse engineering. In this paper a real-time transmission simulator adaptable to TCU is presented, for analysis of diagnosis algorithm and standards. Signal simulation circuits are deliberately designed considering electrical characteristics of TCU inputs and various analysis tools, such as analog input auto scan function, and global output enable switch, are implemented in software. Test results from hardware-in-the-loop simulator verify tolerance time for each error, as well as cause of fault, error reset conditions.

• 지능정보연구
• /
• 제23권3호
• /
• pp.45-67
• /
• 2017

"2016 인터넷이용실태조사"에 따르면 인터넷 이용자수 및 이용률은 점점 증가하고 있으며 접속방법에 있어서는 컴퓨터보다 스마트폰을 통한 접속이 많아지고 있다. 스마트기기의 증가에 따라 초고속인터넷의 수요가 감소할 것이라는 전망도 있다. 하지만, 스마트기기의 증가에도 불구하고 기가인터넷을 통한 속도 향상과 IoT 시장의 성장으로 인해 초고속인터넷 시장은 당분간 유지될 것으로 전망된다. 시장의 포화로 인해 통신사업자들이 신규고객 확보를 위해 과도한 경쟁을 하고 있지만, 고객이탈의 원인을 알 수 있다면 보다 효과적인 마케팅을 통해 과도한 마케팅비용을 절감할 수 있을 것으로 기대된다. 본 연구에서는 통신사업자 A사가 보유하고 있는 안양시, 군포시, 의왕시 3개 도시의 결합유형별 해지 데이터와, 통계청으로부터 구한 지역별 데이터를 결합하여, 지역별 해지율과 이에 영향을 미치는 지역특성간의 관계를 분석하고자 하였다. 특히 인접지역에 따라 결합유형별 해지율의 분포에 차이가 있을 것으로 보고, 클러스터링을 이용하여 해지유형이 유사한 지역을 도출 및 분석하고자 하였다. 공간검색통계도구인 SatScan은 기존의 클러스터링 방법에 공간정보를 추가하여 인접지역을 중심으로 군집이 형성되도록 한다. 따라서 본 연구에서는 SatScan을 이용해 지역의 공간정보를 기반으로 유사지역을 군집화하고, 군집별 해지율과 지역별 데이터와의 연관성을 분석하였다. 분석 단계에서는 먼저 공간정보와 해지데이터를 결합하여 도출된 군집들의 특성을 정리하였으며, 다음으로 군집분석 결과를 바탕으로 하여 각 동의 초고속 인터넷 해지율과 지역별 데이터와의 연관성을 분산분석, 상관분석, 회귀분석을 이용하여 분석하였다. 그리고, 분석결과를 기반으로 하여 지역에 따른 적절한 마케팅 방안을 제안하였다.

• 대한전자공학회논문지SP
• /
• 제41권3호
• /
• pp.139-146
• /
• 2004

본 논문에서는 솔더페이스트의 이차원 및 삼차원 자동검사를 함께 할 수 있는 복합 검사 광학계와 그 구동유닛을 단일 프로브 시스템으로 구현하고, 그를 위한 효과적인 비젼검사 알고리즘을 제안하였다. 솔더페이스트의 이차원 검사에는 One-pass Run Length 레이블링 알고리즘을 제안하여 입력 영상으로부터 솔더 페이스트 형상을 효과적으로 추출하도록 하였고, 고속 검사를 위한 프로브의 최적 이동 경로도 구하였으며, 삼차원 검사에는 기존의 레이져 슬릿빔(slit-beam) 방식 대신 격자 투영식 모아레 간섭계에 기반한 위상이동 알고리즘을 도입하여 고정밀 검사가 가능토록 하였다. 전체 소프트웨어 구현에는 MMX 병렬처리기법도 적용함으로써 더욱 고속화 하였다. 10㎜×10㎜의 단위 측정영역(field of view: FOV)에 대하여 x, y 축으로 10㎛ Z축으로 l ㎛의 분해능을 가지는 이차원 및 삼차원 복합 광학 검사 시스템을 제작하여 실험한 결과, 한 FOV에 대한 솔더페이스트의 이차원 및 삼차원 검사를 영상포착 후 각각 평균 11msec와 15msec의 짧은 시간에 처리할 수 있었고, ±1㎛의 두께 측정 정밀도를 얻을 수 있었다.

• 한국전문물리치료학회지
• /
• 제10권1호
• /
• pp.77-95
• /
• 2003

Many factors affect foot and ankle biomechanics during walking, including gait speed and anthropometric characteristics. However, speed has not been taken into account in foot kinematics and kinetics during walking. This study examined the effect of walking speed on foot joint motion and peak plantar pressure during the walking phase. Eighty healthy subjects (40 men, 40 women) were recruited. Maximal dorsiflexion and excursion were measured at the first metatarsophalangeal joints during walking phase at three different cadences (80, 100, and 120 step/min) using a three dimensional motion analysis system (CMS70P). At the same time, peak plantar pressure was investigated using pressure distribution platforms (MatScan system) under the hallux heads of the first, second, and third metatarsal bones and heel. Maximal dorsiflexion and excursion and excursion at the ankle joint decreased significantly with increasing walking speed. Peak plantar pressure increased significantly under the heads of the first of the first, second, and third metatarsal bones, and heel with increasing walking speed: three was no change under the hallux. There were no significant changes in maximal dorsiflexion or excursion at the first metatarsophalangeal joint. The results show that walking speed should be considered when comparing gait parameters. The results also suggest that slow walking speeds may decrease forefoot peak plantar pressure in patients with peripheral neuropathy who have a high risk of skin breakdown under the forefoot.

• 정보처리학회논문지B
• /
• 제10B권3호
• /
• pp.305-310
• /
• 2003

본 논문은 자동으로 볼트를 고속 정밀 검사할 수 있는 장치에 대한 시스템 설계 및 제품 개발에 관해 다룬다. 볼트를 연속적으로 고속 검사하기 위해 컨베이어를 이용하고 이를 동작시키기 위한 서보모터와 엔코더를 부착하여 정확한 이송량를 유지하게 된다. 엔코더 신호를 수신한 라인스캔 카메라의 동작에 따라 프레임 그래버로 볼트 영상을 전송하며 한 프레임을 구성한 후 영상 검사 알고리즘에 의해 파라메터를 측정하고 검사하게 된다. 제작된 결과물을 이용하여 실험을 통해 본 장치의 효용성을 입증하고자 한다.

• Current Photovoltaic Research
• /
• 제6권4호
• /
• pp.119-123
• /
• 2018

The High Performance Module With The Shingled String Has Several Advantages Such As The Larger Active Area, Higher Open-Circuit Voltage And Smaller Cell To Module (Ctm) Loss. To Obtain Increase Of Power In Pv Shingled Module, The Detailed Condition Of Various Parameters Related To Cutting And Bonding Process Were Investigated In This Study. We Searched The Optimized Cutting Conditions Of Laser Scan Speed, The Number Of Laser-Scribing And Also Bonding Conditions Of Electrically Conductive Adhesives (Eca) By Varying Amount Of Eca, Curing Time And Curing Temperature. The Shingled Pv Module Showed 25.4W of Maxmimum Power At 60 Rpm Of Dipensing Motor Speed, 30 Seconds Of Curing Time And $140^{\circ}C$ Of Curing Temperature, Respectively.

• 대한기계학회논문집A
• /
• 제29권12권
• /
• pp.1653-1659
• /
• 2005

In this study, the performance of a DPRMs is evaluated and the measurement precision for the pile driving is presented. The DPRMs is a visual-measurement system for the pile rebound and the penetration movement using a high speed line-scan camera. The DPRMs generates the measurement deviation. It is caused by the strong impact for the pile driving. To reduce it, the vibration signal analysis about the pile driving is performed. As a result, it is confirmed that the tilting frequency of a camera-tripod structure corresponding to excitation frequency range of the ground is under 40Hz. Through the structure modification, the camera-tripod structure is redesigned to the model being free itself from the excitation frequency range of the ground. By the verification testing about the improvement effects, it is inspected that the tilting and measurement deviation of the redesigned DPRMs are reduced.

• 한국레이저가공학회지
• /
• 제13권1호
• /
• pp.11-15
• /
• 2010

Indium tin oxide (ITO) provides high electrical conductivity and transparency in the visible and near IR (infrared) wavelengths. Thus, it is widely used as a transparent electrode for the fabrication of liquid crystal displays (LCDs) and organic light emitting diode displays (OLRDs), photovoltaic devices, and other optical applications. Lasers have been used for removing coating on polymer substrate for flexible display and electronic industry. In selective removal of ITO layer, laser wavelength, pulse energy, scan speed, and the repetition rate of pulses determine conditions, which are efficient for removal of ITO coating without affecting properties of the polymer substrate. ITO coating removal with a laser is more environmentally friendly than other conventional etching methods. In this paper, pattering of ITO film from polymer substrates is described. The Yb:KGW femtosecond laser processing system with a pulse duration of 250fs, a wavelength of 1030nm and a repetition rate of 100kHz was used for removing ITO coating in air. We can remove the ITO coating using a scanner system with various pulse energies and scan speeds. We observed that the amount of debris is minimal through an optical and a confocal microscope, and femtosecond laser pulses with 1030nm wavelength are effective to remove ITO coating without the polymer substrate ablation.

• 한국분말재료학회지
• /
• 제30권3호
• /
• pp.262-267
• /
• 2023

Boron carbide (B₄C) is highly significant in the production of lightweight protective materials when added to aluminum owing to its exceptional mechanical properties. In this study, a method for fabricating Al-B₄C composites using high-energy ball milling and directed energy deposition (DED) is presented. Al-4 wt.% B4C composites were fabricated under 21 different laser conditions to analyze the microstructure and mechanical properties at different values of laser power and scan speeds. The composites fabricated at a laser power of 600 W and the same scan speed exhibited the highest hardness and generated the fewest pores. In contrast, the composites fabricated at a laser power of 1000 W exhibited the lowest hardness and generated a significant number of large pores. This can be explained by the influence of the microstructure on the energy density at different values of laser power.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.156-158
• /
• 2004

Film printing companies have many problems during a printing process. Most of all, even an insect or dirt stick to the transparent film may cause severe errors until the end of printing job, which means big economic damage to the company. To prevent some insect-dots or dirt-dots, we have to Inspect the total area of film. However, it is very difficult to inspect the film in real-time due to the high-speed of printing that usually more than 150 m/min. A hardware based approach, for example DSP-based approach can be the one of solution candidates, but the total cost and the complexity increases the very high-level. In this paper, we suggest a software based approach, using MMX technology, to inspect the film in real-time. By Many real-plant experiments, we can see the suggest approach is applicable for the inspection of food packaging film in real-time.