• 한국응용과학기술학회지
• /
• 제21권4호
• /
• pp.300-305
• /
• 2004

High-solid coatings were prepared by blending of previosly synthesized acrylic resins and hexamethylene diisocyanate-trimer and curing it at room temperature. The characterization of the films of the prepared coatings was performed. The impact resistance, cross-hatch adhesion, $60^{\circ}$specular gloss, and heat resistance of the films proved to be good, and the pencil hardness and drying time proved to be slightly poor. Especially, there was a remarkable improvement in the heat resistance. This improvement may stem from the regular arrangement of ethyl groups introduced into the acrylic resin. As a result of Rigid-body pendulum visco-elasticity measurement, dynamic $T_g$ values of cured films increased with dynamic $T_g$ values.

• 펄프종이기술
• /
• 제43권5호
• /
• pp.55-59
• /
• 2011

Atmospheric plasma technology was utilized in order to modify surface characteristics of base paper for coating. Argon(Ar) and oxygen(O2) gases were used. It was found that contact angle of a water droplet was decreased with increasing voltage during plasma treatment, meaning that the hydrophilicity of paper surface was increased. On the other hand, the physical properties like roughness and optical properties such as gloss, brightness and opacity were not influenced by the plasma treatment. In conclusion, atmospheric plasma technology can be utilized to control hydrophilicity of paper surface without affecting physical properties of the paper.

• Design & Manufacturing
• /
• 제10권3호
• /
• pp.39-45
• /
• 2016

The purpose of this study is to build effective cooling circuit design in injection mold to improve glass fiber reinforced laptop computer cover plastics' transcription and gloss. Moldflow Insight and Ansys CFD CAE program used to verify efficiency and the experiment mold is precision machined and brazing soldered to make three-dimension cooling channel. The temperature of mold in injection test are fixed to $80^{\circ}C$ and $160^{\circ}C$. The result of this experiment is the improved surface quality of plastics with 85% improvement of transcription in high temperature mold.

• 펄프종이기술
• /
• 제37권4호통권112호
• /
• pp.52-59
• /
• 2005

Most of printing paper market today have been occupied by western paper and some machine-made Hanji used don't show the characteristic advantages for traditional hand-made Hanji. Although hand-made Hanji has an aesthetic and qualitative value, it has limited uses because of poor printability as printing paper. Unlike western paper, conventional Hanji cannot be used as Printing paper because it is impossible to make the clear formation of printed dot and to develop a high level of sizing and picking problem occurs during printing. Improvements of physical and optical properties such as roughness, smoothness, air permeability, contact angle, opacity, and paper gloss as well as sizing level were accomplished through internal and surface sizing and calendering, which made the paper better suited for printing and decreased problems during printing.

• 한국기계가공학회지
• /
• 제19권3호
• /
• pp.92-98
• /
• 2020

In this study, an injection mold with conformal cooling channels was designed and manufactured for use in the production of a thick plastic cosmetic container that required high gloss surfaces. A cooling analysis verified the design of the conformal cooling channel for the cosmetic container, and also showed that the cooling efficiency was superior to that of the straight cooling channel. Slide cores designed with the conformal cooling channel were manufactured using the Layers Parting method and vacuum diffusion bonding. Subsequent test injection and quality inspection showed no problem in the appearance and dimensional accuracy of the produced product. The cycle time for product production was about 110 seconds, sufficient for mass production.

• KIEAE Journal
• /
• 제6권4호
• /
• pp.33-39
• /
• 2006

This study aims to investigate the method to reduce the surface temperature caused by insolation. To achieve this goal, surface temperature of building is measured and the effects of exterior material's color and brilliance were checked with infrared imaging. And also, exterior material's absorptances due to outdoor surface heat transfer coefficients were measured. After surface temperature measurement of 37 specimen of 5 categories, the temperature is the highest on wood($53.62^{\circ}C$) and panel($52.05^{\circ}C$). Dryvit, stone, brick is the rating of order. For exterior material's absorptances, panel(0.883) and wood(0.868) were high and Dryvit, stone, brick follows wood and panel.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 춘계학술대회 논문집
• /
• pp.35-37
• /
• 1988

Polycrystalline $Cd_{1-x}Zn_xS$ films were prepared by coaling a slurry which consisted of CdS, ZnS, $CdCl_2$ and propylene glycol on gloss substrates and by sintering in a nitrogen atmosphere. Microstructures, optical transmittance and electrical resistance of the sintered films have been investigatd. Grain shape of $Cd_{1-x}Zn_xS$ films sintered in a sealed boat was nearly spherical but the shape became, irregular when sintered in evaporating condition due to occurrence of CIGM (Chemically Induced Grain-boundary Migration). Controlling the rate of evaporation of $CdCl_2$, sintered $Cd_{1-x}Zn_xS$ films with high optical transmittance and low electrical resistance could be obtained.

• 보존과학회지
• /
• 제27권2호
• /
• pp.155-162
• /
• 2011

피혁유물은 온·습도, 빛, 충 균 등 다양한 환경요인에 의해 복합적으로 손상된다. 본 연구 결과, 피혁은 원피의 종류에 따라 화학적 조성에 차이가 있어 같은 환경에서도 손상정도가 다르다는 것이 확인되었다. 자외선 열화에 따른 전체적인 색차 및 광택도 변화 및 변색은 우피, 양피, 돈피의 순으로 심하게 관찰되었다. 또한, 피혁은 단기간에는 습도에 관하여 안정적인 결과를 나타났으나 고습의 환경이 지속된다면 곰팡이나 미생물이 발생되기 쉬우므로 주의해야 한다. 본 연구는 피혁유물을 이해하고, 보존환경기준을 제시하여 향후 피혁유물의 보존관리 방안을 수립하는 데에 있다.

• 한국응용과학기술학회지
• /
• 제23권2호
• /
• pp.110-114
• /
• 2006

The high-solid coatings were prepared by blending the synthesized acrylic resin in the previous paper, and hexamethylene diisocyanate-trimer and curing it at room temperature. The characterization of the films of the prepared coatings was performed. The $60^{\circ}$ specular gloss, impact resistance, cross-hatch adhesion, and heat resistance of the films proved to be good, and the pencil hardness, drying time, and pot-life proved to be slightly poor. From a viscoelastic measurement using a rigid-body pendulum, curing was accelerated with the Tg value.

• 한국인쇄학회지
• /
• 제24권1호
• /
• pp.59-66
• /
• 2006

We studied on the effects of the enzyme treatment of pulp fiber on physical properties of coated paper were elucidated using four types of enzymes. The results of this study showed that the blank in which enzyme was not treated showed the highest $St{\ddot{o}}ckigt$ and Hurcules sizing degrees. And when the enzyme treated base paper was used for coating, the coated paper has average 5.7 % higher gloss and whiteness than when untreated base paper was used. Brightness showed 0.12 % higher results with the enzyme treated base papers than the blank while it is considered to show similar trends. Whiteness of coated paper was not influenced by the enzyme treatments but by the properties of coating color. Coated paper whose base paper was enzyme treated showed improved roughness while smoothness of those samples except the ${\beta}$-Glucosidase treated one was relatively low due to the high fines content. Also the coated paper whose base paper was not enzyme treated showed high porosity.