• Journal of Korea Multimedia Society
• /
• v.16 no.8
• /
• pp.954-961
• /
• 2013

To enhance the efficiency of network, content-centric networking (CCN), one of future Internet architectures, allows network nodes to temporally cache transmitted contents and then to directly respond to request messages which are relevant to previously cached contents. Also, since CCN uses a hierarchical content-name, not a host identity like source/destination IP address, for request/response packet routing and CCN request message does not include requester's information for privacy protection, contents-providers/ network nodes can not identify practical requesters sending request messages. So to send back relevant contents, network nodes in CCN records both a request message and its incoming interfaces on Pending Interest Table (PIT). Then the devices refer PIT to return back a response message. If PIT is exhausted, the device can not normally handle request/response messages anymore. Hence, it is needed to detect/react attack to exhaust PIT. Hence, in this paper, we propose improved detection/reaction schemes against attacks to exhaust PIT. In practice, for fine-grained control, this proposal is applied to each incoming interface. Also, we propose the message framework to control attack traffic and evaluate the performance of our proposal.

• Convergence Security Journal
• /
• v.12 no.1
• /
• pp.35-42
• /
• 2012

Increase of data traffic and the advent of new real-time services require to change from the traditional TDM-based (Time Division Multiplexing) networks to the optical networks that soft and dynamic configuration. Voice and lease line services are main service area of the traditional TDM-based networks. This optical network became main infrastructure that offer many channel that can convey data, video, and voice. To provide high resilience against failures, Packet-optical networks must have an ability to maintain an acceptable level of service during network failures. Fast and resource optimized lightpath restoration strategies are urgent requirements for the near future Packet-optical networks with a Generalized Multi-Protocol Label Switching(GMPLS) control plane. The goal of this paper is to provide packet-optical network with a hierarchical multi-layer recovery in order to fast and coordinated restoration in packet-optical network/GMPLS, focusing on new implementation information. The proposed schemes do not need an extension of optical network signaling (routing) protocols for support.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1431-1439
• /
• 2016

In this paper, we propose a new location service and location-based routing for data dissemination from a source to a mobile group sink in less energy consumption of the sensor node. Unlike the existing protocols, the proposed protocol uses a leader sink instead of a group area as the location information to represent a mobile sink group. The proposed protocol also uses grid leaders on virtual grid structure to support sink mobility in location service. By using a leader sink as a representative and grid leaders for mobility supporting, the proposed protocol can exploit an efficient hierarchical location service and data dissemination method without using flooding. Accordingly, the proposed protocol carries out upper layer location services and data dissemination between a leader sink and a source and lower layer location services and data dissemination between the leader sink and member sinks. Simulation results demonstrate that the proposed protocol achieves energy-efficiency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.942-948
• /
• 2016

WSN based on wireless sensor nodes, Sensor nodes can not be reassigned and recharged if they once placed. Each sensor node comes into being involved to a communication network with its limited energy. But the existing proposed clustering techniques, being applied to WSN environment with irregular dispersion of sensor nodes, have the network reliability issues which bring about a communication interruption with the local node feature of unbalanced distribution in WSN. Therefore, the communications participation of the sensor nodes in the suggested algorithm is extended by 25% as the sensor field divided in the light of the non-uniformed distribution of sensor nodes and a static or a dynamic clustering algorithm adopted according to its partition of sensor node density in WSN. And the entire network life cycle was extended by 14% to ensure the reliability of the network.

• The KIPS Transactions:PartC
• /
• v.14C no.2
• /
• pp.171-178
• /
• 2007

In mobile ad hoc networks, an application scenario requires mostly group mobility behavior in the mix of group moving nodes and individually moving nodes. The nodes of those applications tend to belong to the movement group with similar movement behavior. Group mobility is one of the good methods to improve scalability, and reduces the protocol overhead. In this paper, we propose the multicast architecture which regards nodes that have equal group mobility in the heterogeneous group mobility network as the single entity with the multiple interfaces and composes multicast tree, The logical cooperative entity-based multicast architecture accommodates the scalability, the multicast tree simplification, and the protocol overhead reduction which arc obtained from the hierarchical multicast architecture, while it maintains the nat multicast architecture for the data transmission. It also prevents the concentration of the energy consumption dispersing data forwarding load into the several ingress/egress nodes. Results obtained through simulations show that logical cooperative entity based multicast protocol with multiple interfaces offers the protocol scalability and the efficient data transmission.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3B
• /
• pp.144-152
• /
• 2005

Mobile IP(MIP) and SIP have been proposed to support mobility in the wireless internet working at different layers of the protocol stack. However MIP has some problems such as triangle routing, the need of each host's home address, the overhead of tunneling and the lack of wide deployment. Thus we proposed a scheme for supporting mobility based on SIP in this research. A novel SIP system to provide a hierarchical registration has been designed according to this scheme. Our SIP system has been established by implementing JAIN technologies which follow next generation network standards to support the mobility of wireless terminal. This system successfully satisfied ITU-T recommendation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5B
• /
• pp.801-808
• /
• 2010

LEACH, one of hierarchical based routing protocols, was proposed for energy efficiency which is the most important requirement of Wireless Sensor Network(WSN). LEACH protocol is composed of a cluster of certain large number of clusters, which have a cluster head and member nodes. Member nodes send sensing data to their cluster heads, and the cluster heads aggregate the sensing data and transmit it to BS. The challenges of LEACH protocol are that cluster heads are not evenly distributed, and energy consumption to transmit aggregated data from Cluster heads directly to BS is excessive. This study, to improve LEACH protocol, suggests LECEEP that transmit data to contiguity cluster head that is the nearest and not far away BS forming chain between cluster head, and then the nearest cluster head from BS transmit aggregated data finally to BS. According to simulation, LECEEP consumes less energy and retains more number of survival node than LEACH protocol.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.440-443
• /
• 2001

As inter-network traffics grows rapidly, the router systems as a network component becomes to be capable of not only wire-speed packet processing but also plentiful programmability for quality services. A network processor technology is widely used to achieve such capabilities in the high-end router. Although providing two such capabilities, the network processor can't support a deep packet processing at nominal wire-speed. Considering QoS may result in performance degradation of processing packet. In order to achieve foster processing, one chipset of network processor is occasionally not enough. Using more than one urges to consider a problem that is, for instance, an out-of-order delivery of packets. This problem can be serious in some applications such as voice over IP and video services, which assume that packets arrive in order. It is required to develop an effective packet processing mechanism leer using more than one network processors in parallel in one linecard unit of the router system. Simulation analysis is also needed for verifying the mechanism. We propose the packet processing mechanism consisting of more than two NPs in parallel. In this mechanism, we use a load-balancing algorithm that distributes the packet traffic load evenly and keeps the sequence, and then verify the algorithm with simulation analysis. As a simulation tool, we use DEVSim++, which is a DEVS formalism-based hierarchical discrete-event simulation environment developed by KAIST. In this paper, we are going to show not only applicability of the DEVS formalism to hardware modeling and simulation but also predictability of performance of the load balancer when implemented with FPGA.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.1
• /
• pp.22-33
• /
• 1999

In this paper, we propose a new multi-way circuit partitioning system that partition large circuits to progrmmable circuit board which consist of FPGAs and interconnect components. Here the routing topology among the chips are predetermined and the number of available interconnections are fixed. Since the given constraints are difficult to be satisfied by the previous partition method, we suggest a new multi-way partition method by target restriction that considers all the constraints for the given board. To speed up, we construct a multi-level cluster tree for hierarchical partitioning. Experimental results for several benchmarks show that the our partition method partition them by satisfying all the given constraints and it used up to 10 % fewer interconnections among the chips than the previous K-way partition method.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.20-28
• /
• 2007

Zigbee sensor network base on IEEE802.15.4 has local address of 2 byte on transmit packet data which is pick up the address for each sensor node. Sensor network is requested low power, low cost, many nodes at hues physical area. There for Zigbee is very good solution supporting for next Ubiquitous generation but the Zigbee sensor network has address allocation problem of each sensor node. Is established standard from Zigbee Alliance, to the address allocation method uses Cskip algorithm. The Cskip algorithm use the hazard which allocates an address must blow Hop of the maximum modification and child node number. There is to address allocation and from theoretically it will be able to compose a personal 65536 sensor nodes only actual with concept or space, only 500 degree will be able to compose expansion or the low Zigbee network. We proposed an address allocation method using coordinate value for Zigbee sensor network.