• 한국기후변화학회지
• /
• 제4권2호
• /
• pp.141-158
• /
• 2013

본 연구에서는 IPCC SRES 6개 기후변화 시나리오(A2, A1B, A1FI, A1T, B1, and B2)를 기반으로 우리나라의 현재(1996~2005년)와 미래(2046~2055년, 2091~2100년)에 대한 냉난방도일을 전망하였다. 이를 위하여 전구 기후모델(CCSM3)의 미래 전망 결과를 지역규모 기후모델(MM5)을 이용한 다운스케일링을 통해 고해상도(18km)의 기온 전망을 수행하였다. 21세기 말의 한반도 기온은 현재 대비 약 $1.2{\sim}3.4^{\circ}C$ 수준까지 증가하는 것으로 전망된다. 기온 전망 결과를 이용하여 7개 권역별(서울 경기, 강원 산간, 중부 내륙, 남부 내륙, 남부 해안, 영동 울릉, 제주) 냉난방도일을 전망한 결과, 21세기 말의 난방도일은 현재 대비 8~25% 수준까지 감소하는 반면에 냉방도일은 242~1,448%까지 증가하였다. 또한, 난방기간은 약 1개월 정도 감소하며, 냉방기간은 최대 2개월 이상 증가하는 것으로 나타났다. 따라서 현재에 비해 미래의 난방에너지 수요는 감소하지만, 냉방에너지 수요는 증가할 것으로 예측된다. 특히, 이러한 변화는 타 권역에 비해 강원산간권역과 제주권역에서 뚜렷하게 나타날 것으로 예측된다. 따라서 미래에는 난방을 위한 화석에너지보다 냉방에너지로 사용되는 전기에너지에 대한 수요관리가 현재보다 더욱 중요해질 수 있음을 의미한다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.501-504
• /
• 2001

The prototype biofilter was constructed in Suwon campus of Seoul National University and monitored for temperature and treatment efficiencies during a two-year programme. During the winter, daily influent wastewater temperature averages $7.7C^{\circ}$; without heating in 2000 experiment, the treatment efficiencies for BOD and SS droped down to 88.7% and 68.4%, respectively. However, as increased the influent wastewater by installting a heater tank before the biofilter tank in 2001 at the same period ($Feb.\;9{\sim}Mrach\;30$) of 2000 experiment, average daily influent temperature which was $7.2C^{\circ}$ increased to over $18.2C^{\circ}$. As a result, effluent quality remains excellent through the winter and even the post winter with BOD and SS values close to less than 10 mg/L. Nitrification follows temperature patterns. However, there was no improvement of treatment efficiency in total nitrogen (T-N) was observed by increasing temperature.

• 한국진공학회지
• /
• 제8권4B호
• /
• pp.497-506
• /
• 1999

Carbon has been widely used for the material of plasma facing components in fusion experiment devices like a tokamak, because carbon has good thermal and mechanical properties. However carbon gas a relatively high ougassing rate. Therefore the amount and the surface area of the carbon material used in the vessel will determine the background pressure of the vacuum vessel. In this experiment influences of carbon on the vacuum performance was investigated by measuring chamber pressure, ougassing rater and gas spectrum of carbon fiber composite (CFC) samples in various situations, pumping out, chamber baking, carbon heating (250~$500^{\circ}C$), exposure to atmosphere for maintenance of in-vessel components, etc., occurring routinely during tokamak operations.

• 한국대기환경학회지
• /
• 제20권3호
• /
• pp.303-315
• /
• 2004

The change of land use such as the construction of way in mountainous area and tunnel leads to the quantitative change of the greenhouse gas. This study tried to clarify the effect of the change of land use around Miryang Ice Valley on thermal environment of micro-meteorological scale by numerical experiment. We carried out several numerical experiment under different atmospheric conditions with different amount of greenhouse gases. Heating rate increased by the greenhouse gas in the ground level is average of 0.0073 K/day. And the increasing rate if smaller than the daily average heat crossing quantity.

• 설비공학논문집
• /
• 제13권5호
• /
• pp.411-421
• /
• 2001

The purpose of this study is to investigate the performance of an autocascade refrigeration system by simulation and experiment using refrigerant mixtures of R744/134a and R744/290 as working fluid. Variations of mass flow rate of refrigerant, compressor work refrigeration capacity and COP with respect to mass fraction of R744/134a and R744/290 mixture were presented under different operating conditions. Performance test has been executed by ASRAE standard. Experimental results show as the composition of R744 in the refrigerant mixture increases, heating and coling capacity are enhanced, but COP trends to decrease. Experimental results are compared with those from the simulation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.113-114
• /
• 2014

Though polymer cement mortar is widely used to repair or reinforce concrete as it has superior adhesion, dense internal structure, chemical resistance, and workability in comparison to those of general cement mortar, studies on its behaviors in high temperature environment such as fire is urgently required. Accordingly, in this experiment, the degrees of reduction in the compressive strength at different temperatures was grasped applying ISO834 Heating Curve, and the effect of polymer content and type on compressive strength could be determined. As a result of this experiment, it is found that polymer type and content have a big effect on reduction of compressive strength in high temperature range, and not only the dynamic characteristics but also the combustion characteristics in high temperature range are required to be studied considering occurrence of a fire in the future.

• 수산해양교육연구
• /
• 제18권3호
• /
• pp.229-235
• /
• 2006

This study investigated physiology and psychological response of subjects, when heat pump was operated long time within comfort temperature range. Eight subjects were participated for the experiment. Their age was from 22 to 25 years old. The results of this experiment will propose basic data for improving comfort control algorithm in fluctuating environment by using heat pump. When indoor temperature was controlled by heat pump, the conclusion was as follows. 1) When votes of subjects was considered, the thermal comfort neutrality or lower range helped formation of comfort sensation for subjects. 2) When room temperature was lower, thermal comforts of shoulder, knee and foot with subjects thermal comfort showed high correlation. And when room temperature was higher, thermal comfort of face region with subjects thermal comfort showed high correlation. 3) The necessity of temperature change after 50 minutes from initially operating heat pump demands the additional analysis against the physiological signal.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.849-852
• /
• 2006

The lightweight foamed concrete is superior to properties of insulation and light-weight because it is included in many inner pore. So, lightweight foamed concrete used to construction field that need to property of insulation. The property of insulation of lightweight foamed concrete is varied with density. Also, Density is varied with hardening matrix and pore rate. The purpose of the experiment is to know thermal properties of specimen according to the change of density when heating the specimen. As a result of this experiment, the higher density, the lower temperature of mold. this tendency isn't same as ordinary lightweight foamed concrete, and then density 0.9 is expressed most low temperature result also the discontinuity of shape of mold was efficient for the prevention of the temperature rise.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.585-590
• /
• 2004

An analytical method is proposed for the analysis of the reinforced concrete flexural beam subjected to high temperature. The analysis procedure for the material properties, in this study, is subdivided into two types; thermal properties for temperature distribution analysis and mechanical properties for structural analysis. Using F.D.M. and segmentation method, the program was made to predict the thermal behavior of RC beams during heating. In previous studies, the structural behavior of fire damaged RC beams was investigated though experiments. Comparing the result by program to the one by experiment, the comparison indicated that the proposed segmentation method for the thermal respose analysis present fairly a good agreement with experiment.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.201-204
• /
• 2004

The purpose of this study is recycling of sewage sludge and fly-ash. In this experiment, green aggregates, which is a mixture of sewage sludge and clay and fly-ash, with different content of sewage sludge (up to $80wt\%$). Then they were burned in different soak temperatures from $1190^{\circ}C\;to\;1290^{\circ}C$ with changed soak time and heating rate at 5, 7, 10 minutes and $20^{\circ}C/min$, $30^{\circ}C/min$ respectively in order to produce lightweight aggregate (LWA). Data of both experiment series were generated to evaluate the quality of LWA as well as the relationship between burning condition and product's quality.