• Journal of Soil and Groundwater Environment
• /
• v.29 no.1
• /
• pp.39-50
• /
• 2024

Slags from steel-making industry have been recycled at a target rate of 95% and most of them are recycled as media-contact type such as fill and cover materials in Korea. However, as they contain free phase CaO during their generation, they may not only expand and collapse upon contact with water, but high pH leachate and heavy metals leaching may occur. In this study, the Korean leaching procedure (KLP) and up-flow percolation test were performed for the samples collected from 17 steel-making production plants in Korea. The waste quality criteria were met in all tests, but pH of the samples was above 10. There are no regulations on the pH of leachate in most of the countries, however, Germany, Italy, and Australia have set a pH range of 10 to 13 for the leachates. Although slag leachate cannot be considered hazardous based only on its high pH, it is necessary to reduce the pH of leachate to minimize the impact on the surrounding environment. Furthermore, conflicting regulations on wastes handling and management in Korea created confusion on the types of wastes subject to recycling. Therefore, an appropriate management plan for steel-making slags needs to be established. To this end, this study attempted to provide a guideline for managing steel-making slag waste by considering international guidelines and current management practices in Korea.

• Analytical Science and Technology
• /
• v.27 no.5
• /
• pp.254-260
• /
• 2014

In this study, heavy metals, PCDD/PCDFs, PAHs in wastes generated from thermal processes were analyzed. Waste from lead thermal metalurgy (EWC 10 04) inorganic metal substances in the regulation were detected in the highest concentrations of Pb. EWC 10 04 seems to be a result of the dust. Waste from zinc thermal metalurgy (EWC 10 05) inorganic metal substances in the regulation were detected in high concentration of Zn. EWC 10 05 seems to be a result of the dust. Waste from copper thermal metalurgy (EWC 10 06) Cu in the 651,77 mg/kg to 651 times higher than regulation standard appeared in the copper thermal metallurgy process seems to be a result of dust. The concentrations of PCDD/PCDFs ranged from 0.0005~11.748 ng-TEQ/g in dust, 0.0027 ng-TEQ/g in fly ash. PCDD/PCDFs content was not detected in excessive value in regulation standard. PAHs concentration was in the range of ND~118.9 mg/kg in Naphthalene, ND~9.6 mg/kg in Phenanthrene, ND~48.4 mg/kg in Benzo[b]fluoranthene, ND~62.6 mg/kg in Benzo[a]pyrene, ND~10.7 mg/kg in Fluoranthene, ND~11.5 mg/kg in Benzo[a]anthracene.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.3
• /
• pp.297-305
• /
• 2016

An approach to assess inadvertent human intrusion into radwaste repository was proposed with the assumption that the intrusion occurs after a loss of knowledge of the hazardous nature of the disposal facility. The essential boundary conditions were derived on the basis of international recommendations, followed by an overall approach to deal with inadvertent human intrusion. The interrelation between societal factors, human intrusion scenarios, and protective measures is described to provide a concrete explanation of the approach, including the detailed procedures to set up the human intrusion scenario. The procedure for deriving protective measures is also explained with four steps, including how to derive a safety framework, general measures, potential measures, and eventual protective measures on the basis of stylized scenarios. It is expected that the approach proposed in this study will be used effectively to reduce the potential for and/or the consequences of human intrusion during the entire process of realizing a disposal facility.

• Resources Recycling
• /
• v.30 no.3
• /
• pp.70-81
• /
• 2021

This study evaluated the recyclability of waste plastics in used coffee capsules disposed of as municipal waste. For recycling, a new material separation process was developed to remove the coffee grounds through primary crushing, washing, sieving, and secondary crushing, followed by corona discharge electrostatic separation. Furthermore, for the under 10 mm size fraction samples, the aluminum removal and the plastic recovery were 95.4% and 98.3%, respectively, under optimal conditions. In addition, for the 15 mm fraction samples, the aluminum removal and the plastic recovery were 91.3% and 97.2%, respectively. To evaluate the recyclability of the separated waste plastics, the samples were pelleted, and their material properties were analyzed. No hazardous substances were detected, and the results were similar to those for homo-PP. Therefore, it was confirmed tha t sufficient functiona lity existed a s recycled PP. However, owing to the da rk color of the pellets, limited applications to black or dark products are expected.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.3
• /
• pp.149-158
• /
• 2021

Advances in food packaging play an important role in keeping food manufacturing and food supply safe. Food packaging facilitates the storage, handling, transportation and preservation of food, and also contributes to the minimization of food waste. On the other hand, food packaging materials have high production volumes, short usage times, and accelerate the occurrence of environmental problems related to waste. The circular economy has already been introduced to pursue sustainability through resource conservation and recycling, and to reduce waste and carbon emissions. By activating an eco-friendly economic system that minimizes resource depletion and environmental pollution, reducing, reusing, recycling and redesigning the goals of the circular economy will reduce the impact of food packaging on the environment. This review focused on the safety aspects of recycled food packaging as recycling is currently considered an important means of packaging waste management. Assessing the safety of recycled packaging is very important because recycling can increase the levels of potentially hazardous chemicals in packaging and in the food after they are migrated. Various food packaging materials such as plastic, paper and cardboard, aluminum, steel, and multi-material multi-layers packaging are commonly used, but only the recycling safety of plastic food packaging materials, which is the most used and has a significant increase in post-use problem, is discussed in this review.

• Advances in concrete construction
• /
• v.2 no.1
• /
• pp.29-37
• /
• 2014

Increasing emphasis on energy conservation and environmental protection has led to the investigation of the alternatives to customary building materials. Some of the significant goals behind understaking such investigations are to reduce the greenhouse gasemissions and minimize the energy required formaterial production.The usage of concrete around the world is second only to water. Ordinary Portland Cement (OPC) is conventionally used as the primary binder to produce concrete. The cement production is a significant industrial activity in terms of its volume and contribution to greenhouse gas emission. Globally, the production of cement contributes at least 5 to 7 % of $CO_2$. Another major problem of the environment is to dispose off the fly ash, a hazardous waste material, which is produced by thermal power plant by combustion of coal in power generation processes. The geopolymer concrete aims at utilizing the maximum amount of fly ash and reduce $CO_2$ emission in atmosphere by avoiding use of cement to making concrete. This paper reports an experimental work conducted to investigate the effect of curing conditions on the compressive strength of geopolymer concrete prepared by using fly ash as base material and combination of sodium hydroxide and sodium silicate as alkaline activator.

• Journal of Environmental Science International
• /
• v.17 no.10
• /
• pp.1183-1193
• /
• 2008

Today, environmental pollution and destruction due to the industrialization of our modem society have been the global issues. Although now we can lead affluent lives through science technologies and economic development, these environmental problems have resulted in striking the harmonious balance between human beings and nature and threatened human lives with abnormal weather caused by the global warming, destruction of the ozone layer, and El Nino phenomenon, acid rain, decrease in species diversity, movement of hazardous materials, and harmful waste increase. We are aware of the importance of environmental education, but in reality, it seems impossible to implement appropriate environmental education on account of our educational climate which exclusively focuses on the entrance examination. However, environmental education is the most ultimate solution for those problems in that only when students understand our environment fully and grow habits to protect it through environmental education, the present environmental problems can be solved and more serious problems that can be resulted in the future can possibly be prevented. Thus, this study has examined the effect of using image media in the environment subject on students' environmental sensitivity. According to the results, it was shown that it had positive effects on 'sensitivity of environment', 'attitudes towards environment', and 'environmental affinitive behaviors'.

• Clean Technology
• /
• v.3 no.2
• /
• pp.57-73
• /
• 1997

Metal cleaning process is a technology which removes oil, dust and soil etc. on the surface of metal utilizing cleaning agents. These contaminants disturb the following processes such as plating and painting etc. if they are not removed. Thus, metal cleaning is typically an environmentally hazardous activity. Until recently, vapor degreasers as utilizing chlorinated solvents have been relatively cheap, extraordinarily versatile and waste disposal costs have been perceived as insignificant. Today, however, it is readily apparent that Industry's reliance upon chlorinated solvents as metal cleaners have resulted in a myriad of environmental, health and safety concerns. Therefore, this paper studies on a parameter and a sort of the alternative cleaning agents for the optimum cleaners. Also, a great deal of effort has been devoted to developing alternative metal cleaning technologies in advanced countries and some processes are being commercialized among them. We are going to consider alternative aqueous cleaning agents replacing organic chlorinated solvents and to pursue a domain application through a successful improvement case.

• Textile Coloration and Finishing
• /
• v.13 no.5
• /
• pp.18-18
• /
• 2001

Natural colorants have attracted much attention all over the world because of their non-hazardous nature. The world is becoming increasingly aware of environmental issues, such as ozone layer depletion, water pollution and waste disposal problems. The use of synthetic dyestuffs for their synthesis and application in the dyeing industries has been criticized due to introduction of contaminants into the environment. This has led to the desire to turn to the traditional, and more natural way of life. In this study, the colorants of extract of Ginkgo biloba bark were analysed and their dyeing properties on silk, wool and cotton were studied. It was found that uv-visible absorption spectra of extract of Ginkgo biloba bark showed two strong absorption peaks in the range of 240∼400 nm. From the result of IR spectra, the major ingredient of extract of Ginkgo biloba bark seems to be the flavon which is one of the flavonoid derivatives. Silk, wool, and cotton dyed with the extract of Ginkgo biloba bark showed a reddish yellow color. Their color differences were increased drastically with repetition of dyeing by three times.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.141-146
• /
• 1996

Hand posture and force, which define aspects of the way an object is grasped, are features of robotics manipulation. A means for specifying these grasping "flavors" has been developed that uses an instrumented glove equipped with joint and force sensors. The new grasp specification system is being used at the Pennsylvania State University (Penn State) in a Virtual Reality based Point-and-Direct(VR-PAD) robotics implementation. In the Computer Integrated Manufacturing (CIM) Laboratory at Penn State, hand posture and force data were collected for manipulating bricks and other items that require varying amounts of force at multiple pressure points. The feasibility of measuring desired grasp characteristics was demonstrated for a modified Cyberglove impregnated with FSR (Force Sensitive Resistor) pressure sensors in the fingertips. A joint/force model relating the parameters of finger articulation and pressure to various lifting tasks was validated for the instrumented "wired" glove. Operators using such a modified glove may ultimately be able to configure robot grasping tasks in environments involving hazardous waste remediation, flexible manufacturing, space operations and other flexible robotics applications. In each case, the VR-PAD approach improved the computational and delay problems of real-time multiple-degree-of-freedom force feedback telemanipulation.ck telemanipulation.