• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.8
• /
• pp.1251-1257
• /
• 2004

In order to analyze the heat transfer phenomena in the plasma flames, a mathematical model describing heat and fluid flow in an electric arc has been developed and used to predict heat transfer from the arc to the steel bath in a DC Electric Arc Furnace. The arc model takes the separate contributions to the heat transfer from each involved mechanism onto account, that is radiation, convection and energy transported by electrons. The finite volume method and a SIMPLE algorithm are used for solving the governing MHD equations, that are conservation equations of mass, momentum and energy together with the equations describing a standard k-${\varepsilon}$ model for turbulence. The model predicts heat transfer for different currents and arc lengths. Finally these calculation results can be used as a useful insight into plasma phenomena of the industrial-scale electric arc furnace. From these results, it can be concluded that higher arc current and longer arc length give high heat transfer

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.2
• /
• pp.108-114
• /
• 1998

Development on the mechanical properties of steel sheet for the automobile body panel is very important in the BAF(Batch annealing furnace) annealing process. Because of the heat treatment method in the BAF, mechanical properties was decided on the heat treatment method of the coil. So, we tested on the development of mechanical properties according to heat treatment method at the annealing furnace using the Ax(H$_2$75%, $N_2$25%) atmospheric gas and the HNx(H$_2$4%, $N_2$96%) atmospheric gas. As a result of several investigations. We confirmed the following characteristics ; mechanical properties was changed under the influence of the annealing cycle, the heat treatment method and the atmospheric gas. And, elongation in the HNx BAF was better than the Ax BAF. Finally, most important thing in the BAF is using of proper annealing cycle in order to get a good quality.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.806-810
• /
• 2008

This paper introduces the automatic fine Bituminous Coal injection lance position control method using flame image process. The fine Coal injection lance is used to supply additional heat into the furnace in Mill plant. It injects fine coal into high pressured air flow and produces very heated and high pressured flame. For the such high temperature and pressure, the fine coal injection lance effects not only efficiency of burner but also furnace abrasion. To keep efficient combustion status and to avoid the abrasion, in this paper, the flame is monitored by computer image process. This paper proposes the flame image process method and lance position control according to calculated result for flame image process.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.6 s.249
• /
• pp.514-522
• /
• 2006

This study has been performed to predict the transient thermal behavior of the plate in indirectly-fired continuous heat treatment furnace. The temperature profiles in the plate are determined solving the transient one-dimensional heat conduction equations. To verify the validity of the present numerical results, the present results obtained from the transient analysis are compared with those of experiments. Extensive parametric investigations are performed to examine the effects of the emissivities of the plate and refractory, plate thickness and velocity, as well as the gas temperature, on the thermal behavior of the plate.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.102-103
• /
• 2016

Recently on construction sites, there is increased use of concrete with large quantities of blast-furnace slag(BS) admixture replacements, for purposes of reducing CO2 created from cement, one of the ingredients of concrete. But such high-BS fineness changes can have a huge effect on the quality of mortar and concrete. Therefore in this study an experiment was conducted in which liquidity and intensity of mortar depending on an artificially-applied change in fineness degree at degree 7. The results, though subtle, were that the larger the fineness degree, liquidity increased and air quantity decreased, and compression and flexural strength increased.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.117-118
• /
• 2016

This paper evalutes properties of extruding cement panel using Ca-extracted convert slag and air-cooled blast furnace slag. Flexural strength of extruding cement panel has measured in air dry and autoclave curing as basic study for use as silicious source. As a result, when Ca-extracted converter slag replaces 25% in autoclave curing, flexural strength measures 13.1MPa better than panel control mix. In result of using air-cooled blast furnace slag, Ca-extracted air-cooled blast furnace slag dose not show increase of flexural strength.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.208-209
• /
• 2017

This study analyzed the fluidity and strength properties of mortar containing high volume blast furnace slag by replacement ratio of lightweight fine aggregate for reducing the unit weight of concrete structures.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.54-55
• /
• 2016

Recently in the construction industry, industrial by-product admixtures like blast-furnace slag fine particles (BS henceforth) are being used as binding material, reducing the use of cement, and measures to reduce CO₂ emissions are being examined on various levels. However, the BS being used domestically varies depending on the origin of resources, and by circulating BS that is inappropriate to the KS standard, problems are occurring in terms of changes and declines in the quality of concrete which uses it. Therefore in this study the liquid densimeter principle was used to assess various BS fineness qualities; with 100 g/L fixed, a 1,000cc mass cylinder was most appropriate for assessing the quality of cement fineness.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.257-258
• /
• 2012

With regard to the carbon reduction that has become an international problem, we have examined the effects of compressive strength of the ground granulated blast-furnace slag mortar with the curing temperature. Also, we evaluated the mechanical properties of steel slag powder produced during the steelmaking process in order to examine the possibility as admixture.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.251-252
• /
• 2012

The exiting studies on the strength prediction by maturity method is mainly focused on concrete using OPC, meanwhile the study on the concrete mixing blast furnace slag powder (BFSP) is insufficient. The purpose of this study is to investigate the relationships between compressive strength and equivalent age by existing Maturity functions, i.e., Nurse-saul function Arrhenius function. This study also compared and examined the strength prediction of concrete mixing BGSP using ACI model and Logistic Curve prediction equation. Therefore, it is intended that fundamental data are presented for quality management and process management of concrete mixing BFSP.