• 통합자연과학논문집
• /
• 제3권4호
• /
• pp.202-205
• /
• 2010

Nanocrystalline porous silicon surfaces have been used to detect nitroaromatic compounds in vapor phase. The mode of photoluminescence is emphasized as a sensing attitude or detection technique. Quenching of photoluminescence from nanocrystalline porous surfaces as a transduction mode is measured upon the exposure of nitroaromatic compounds. Reversible detection mode for nitroaromatics is, too, observed. To verify the detection afore-mentioned, photoluminescent freshly prepared porous silicons are functionalized with different groups. The mechanism of quenching of photoluminescence is attributed to the electron transfer behaviors of quantum-sized nano-crystallites in the porous silicon matrix to the analytes(nitroaromatics). An attempt has been done to prove that the surface-derivatized photoluminescent porous silicone surfaces can act as versatile substrates for sensing behaviors due to having a large surface area and highly sensitive transduction mode.

• Journal of Electrochemical Science and Technology
• /
• 제10권2호
• /
• pp.185-195
• /
• 2019

The large surface area and the high electrical conductivity of graphene (GP) allow it to act as an "electron wire" between the redox center of biomolecules and an electrode surface. The faster electron transfer kinetics and excellent catalytic activity of GP facilitate the accurate and selective electrochemical detection of biomolecules. This mini-review provides an overview of the recent developments and progress of GP, functionalized or doped GP, and GP-composites based sensors for the selective and interference-free detection of dopamine (DA). The electrochemical principles and future perspective and challenges of DA sensors were also discussed based on GP.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2003년도 somma/kms meeting
• /
• pp.211-211
• /
• 2003

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.413-413
• /
• 2014

In this paper, we present a fabrication method of functionalized gold nanostructures on flexible substrate that can be implemented for plasmonic sensing application. For biomolecular sensing, many researchers exploit unconventional lithography method like nanoimprint lithography (NIP), contact transfer lithography, soft lithography, colloidal transfer printing due to its usability and easy to functionalization. In particular, nanoimprint and contact transfer lithography need to have anti-adhesion layer for distinctive metallic properties on the flexible substrates. However, when metallic thin film was deposited on the anti-adhesion layer coated substrates, we discover much aggravation of the mold by repetitive use. Thus it would be impossible to get a high quality of metal nanostructure on the transferred substrate for developing flexible electronics based transfer printing. Here we demonstrate a method for nano-pillar mold and transfer the controllable nanoparticle array on the flexible substrates without an anti-adhesion layer. Also functionalization of gold was investigated by the different length of thiol applied for effectively localized surface plasmonic resonance sensing. First, a focused ion beam (FIB) and ICP-RIE are used to fabricate the nanoscale pillar array. Then gold metal layer is deposited onto the patterned nanostructure. The metallic 130 nm and 250 nm nanodisk pattern are transferred onto flexible polymer substrate by bi-layer functionalized contact imprinting which can be tunable surface energy interfaces. Different thiol reagents such as Thioglycolic acid (98%), 3-Mercaptopropionic acid (99%), 11-Mercaptoundecanoic acid (95%) and 16-Mercaptohexadecanoic acid (90%) are used. Overcoming the repeatedly usage of the anti-adhesion layer mold which has less uniformity and not washable interface, contact printing method using bi-layer gold array are not only expedient access to fabrication but also have distinctive properties including anti-adhesion layer free, functionalized bottom of the gold nano disk, repeatedly replicate the pattern on the flexible substrate. As a result we demonstrate the feasibility of flexible plasmonic sensing interface and anticipate that the method can be extended to variable application including the portable bio sensor via mass production of stable nanostructure array and other nanophotonic application.

• 공업화학
• /
• 제25권4호
• /
• pp.396-400
• /
• 2014

메조포러스 물질, SBA-15와 MCM-41의 세공 표면을 유기실란인 3-aminopropyltrimethoxysilane (1NS)와 N-[(3-trimethoxysilyl) propyl]ethylenediamine (2NS)를 이용하여 그라프팅법으로 표면 기능화하였다. 표면 기능화된 메조포러스 물질에 $(n-BuCp)_2ZrCl_2$와 조촉매 methylaluminoxane (MAO)를 담지하여 에틸렌 중합을 실시하였다. SBA-15/2NS/$(n-BuCp)_2ZrCl_2$ 촉매는 그라프팅되는 2NS의 양이 증가할수록 담지된 Zr와 Al 함량은 감소하였으며, MCM-41/2NS/(n-BuCp)2ZrCl2 촉매는 2NS의 양이 증가할수록 Zr 함량은 증가하지만 Al 함량은 감소하였다. SBA-15/2NS/$(n-BuCp)_2ZrCl_2$ 촉매의 중합 활성은 2NS의 투입량을 증가할수록 감소하였다. 이는 많은 양의 2NS가 표면에 그라프팅되는 경우 기공부피와 기공크기가 작아지게 되고 따라서 MAO와 메탈로센 촉매 담지량이 감소하게 되기 때문이다. 그러나 SBA-15보다 작은 기공을 갖는 MCM-41을 2NS로 표면 기능화되면 큰 분자 크기를 갖는 조촉매 MAO는 담지 되기 어려워 낮은 MAO 담지량을 갖게 된다. 따라서 메탈로센 담지량은 약간 증가하게 되고 이에 따라 중합 활성이 증가하였다.

• 접착 및 계면
• /
• 제19권4호
• /
• pp.154-162
• /
• 2018

필름 형태의 Polydimethylsiloxane (PDMS)은 표면 개질을 하기 위해 Plasma 처리 또는 Corona 처리를 하여 표면을 -OH기로 활성화시키는 공정이나, 피착제와 PDMS 필름의 접착 또는 Adhesion promoter와 축합 반응을 통해 PDMS 표면을 다른 작용기로 개질시키는 공정, Grafting polymerization을 이용하는 PDMS 개질 공정이 주로 이용된다. 그러나 Plasma나 Corona 처리 후에 친수성이 오래가지 못하고, 보관에 어려움이 있다. 따라서, 본 연구에서는 코팅 공정을 통하여서 PDMS표면 개질을 하기 위해서, 먼저 새로운 형태의 실란 기능화 아크릴 고분자 전구체를 합성하고 이를 Hydroxyl-terminated PDMS와의 축합 반응을 통해 아크릴 고분자와 PDMS 고분자가 결합된 형태의 표면 개질제를 제조한 후, 이를 PDMS 필름 위에 코팅하였다. 제조한 표면 개질제의 구조와 분자량을 확인하기 위하여 1H-NMR과 GPC를 분석하였고, 표면 개질제가 코팅된 PDMS표면 특성 변화를 확인하기 위하여 XPS, ATR, WCA를 이용하여 표면 특성을 조사하였으며, PDMS 필름과의 부착을 확인하기 위해 Cross cutting test를 진행하였다. 그 결과 PDMS 필름 표면이 아크릴 고분자층이 형성된 것으로 확인하였고, PDMS 필름과 표면 개질제와의 부착성 (4 - 5B) 또한 우수한 것을 확인하였다.

• The Korean Journal of Ceramics
• /
• 제6권4호
• /
• pp.401-404
• /
• 2000

Mimicking the bacterial synthesis of magnetosomes, in which the functionalized surface of a cytoplasmic (lipid) membrane is considered to be stimulating the crystal growth of magnetite, we have successfully grown magnetite films at $30^{\circ}C$ using an arachic acid monomolecular layer as a functionalized surface. The lipid monomolecular layer was spread on an aqueous solution of FeCl$_2$ which was oxidized by flowing a mixed gas, with ratio $O_2$/$N_2$=1/2000, on the surface of the lipid layer. Mossbauer and X-ray diffraction analyses revealed that the Fe$_3$O$_4$ films contain small amounts of ferric hydroxyl impurity phases of ${\alpha}$-FeOOH and ${\tau}$-FeOOH. This is because the oxygen partial pressure at the ferrite/aqueous interface changed as the film (through which the gas penetrated) increased in thickness. Methods to obtain single phase magnetite films are proposed.

• 한국분말재료학회지
• /
• 제14권4호
• /
• pp.256-260
• /
• 2007

The surface of magnetite ($Fe_{3}O_{4}$) nanoparticles prepared by coprecipitation method was modified by carboxylic acid group of poly(3-thiophenacetic acid (3TA)) and meso-2,3-dimercaptosuccinic acid (DMSA). Then the lysozyme protein was immobilized on the carboxylic acid group of the modification of the magnetite nanoparticles. The magnetite nanoparticles are spherical and the particle size is approximately 10 nm. We measured quantitative dispersion state by dispersion stability analyzer for each $Fe_{3}O_{4}$ nanoparticles with and without surface modification. The concentration of lysozyme on the modified magnetite nanoparticles was also investigated by a UV-Vis spectrometer and compared to that of magnetite nanoparticles without surface modification. The functionalized magnetite particles had higher enzymatic capacity and dispersion stability than non-functionalized magnetite nanoparticles.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.61-61
• /
• 2010

In the present work, we present the optimized the hybrid structures of carbon nanotubes (CNTs) and metal nanocomposites including Cu, Al, Co and Ni using the first principle calculations based on the density functional theory. Introduction of CNTs into a metal matrix has been considered to improve the mechanical properties of the metal matrix. However, the binding energy between metals and pristine CNTs wall is known to be so small that the interfacial slip between CNTs and the matrix occurs at a relatively low external stress. The application of defective or functionalized CNTs has thus attracted great attention to enhance the interfacial strength of CNT/metal nanocomposites. Herein, we design the various hybrid structures of the single wall CNT/metal complexes and characterize the interaction between single wall CNTs and various metals such as Cu, Al, Co or Ni. First, differences in the binding energies or electronic structures of the CNT/metal complexes with the topological defects, such as the Stone-Wales and vacancy, are compared. Second, the characteristics of functionalized CNTs with various surface functional groups, such as -O, -COOH, -OH interacting with metals are investigated.We found that the binding energy can be enhanced by the surface functional group including oxygen since the oxygen atom can mediate and reinforce the interaction between carbon and metal. The binding energy is also greatly increased when it is absorbed on the defects of CNTs. These results strongly support the recent experimental work which suggested the oxygen on the interface playing an important role in the excellent mechanical properties of the CNT-Cu composite[1].

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.168-168
• /
• 2014

전기화학적으로 몇 가지 기능수를 제조하여 화학적, 전기화학적 특성을 확인하고 그 중 전해 환원수를 주요 타겟으로 하여 이를 금속 표면에 적용해 부식에 대한 영향을 실험적으로 확인하였다.