• 한국정밀공학회지
• /
• 제23권8호
• /
• pp.185-194
• /
• 2006

In this paper, three dimensional finite element analyses have been performed to investigate the biomechanics of vertebroplasty in patient accurate FE models have been constructed from CT images of a PMMA injected vertebra. In order to apply various material properties of the spine(T12), the functional relation between the well known apparent density and HU(Hounsfield unit) from CT image were employed and thus real material properties can be assigned to each element of FE model. The FE analysis showed similar results with the experiments. With this approach accurate analysis of the vertebroplasty and its clinical applications can be expected.

• 한국정밀공학회지
• /
• 제21권5호
• /
• pp.174-181
• /
• 2004

This paper presents the development of a magnetostrictive microactuator. The structural and functional requirements are as follows: it must be a millimeter structure and must achieve controllable displacement with nanometer resolution. Finite Element Analysis(FEA) is used to determine the structure with the most uniform and highest magnetic flux density along the Terfenol-D rod. The microactuator prototype 1 is designed and made based on the FEA. It is observed that the microactuator show some level of hysteresis and that it produces 25 newton in force and 3 ${\mu}{\textrm}{m}$ in displacement with 1.5 amperes of current, and resolution of 250 nm per 0.1 amperes. To improve the performance of the microactuator prototype 1, microactuator prototype 2 is made again with a permanent magnet (PM). It is observed that the microactuator prototype 2 gene.ates 3.3 ${\mu}{\textrm}{m}$ in displacement with 0.9 amperes of current. It means that the microactuator prototype 2 performs better than the microactuator prototype 1.

• 대한수학회지
• /
• 제46권5호
• /
• pp.1007-1025
• /
• 2009

First-order least-squares method of a distributed optimal control problem for the incompressible Stokes equations is considered. An optimality system for the optimal solution are reformulated to the equivalent first-order system by introducing the vorticity and then the least-squares functional corresponding to the system is defined in terms of the sum of the squared $H^{-1}$ and $L^2$ norms of the residual equations of the system. Finite element approximations are studied and optimal error estimates are obtained. Resulting linear system of the optimality system is symmetric and positive definite. The V-cycle multigrid method is applied to the system to test computational efficiency.

• Journal of Ship and Ocean Technology
• /
• 제8권3호
• /
• pp.8-17
• /
• 2004

A numerical method is developed for computing the free surface flows around a transom stern of a ship at a high Froude number. At high speed, the flow may be detached from the flat transom stern. In the limit of the high Froude number, the problem becomes a planning problem. In the present study, we make the finite-element computations for a transom stern flows around a wedge-shaped floating ship. The numerical method is based on the Hamilton's principle. The problem is formulated as an initial value problem with nonlinear free surface conditions. In the numerical procedures, the domain was discretized into a set of finite elements and the numerical quadrature was used for the functional equation. The time integrations of the nonlinear free surface condition are made iteratively at each time step. A set of large algebraic equations is solved by GMRES(Generalized Minimal RESidual, Saad and Schultz 1986) method which is proven very efficient. The computed results are compared with previous numerical results obtained by others.

• 한국기계가공학회지
• /
• 제17권5호
• /
• pp.137-142
• /
• 2018

With the development of the electronic-materials industry, multi-functional metal-composite materials with high thermal conductivity and low thermal expansion must be developed for high reliability and high life expectancy. This paper is a preliminary study on the manufacturing technology of gas reaction control composite material, focusing on the prediction of the equivalent thermal properties of Al-AlN composite materials. Numerical equivalent property values are obtained by using finite element analysis and compared with theoretical formulas. Al-AlN composite materials should become the optimal composite material when the proportion of the reinforcing phase is less than 0.5.

• 현장농수산연구지
• /
• 제5권1호
• /
• pp.36-56
• /
• 2003

Selenium(Se) is an essential trace element in the human body. Main function of this element is a catalytic part of antioxidant enzymes that protect cells against the attacks of free radicals that are produced during normal metabolism of the body. Se is also essential for normal function of the immune system and thyroid gland. It also appears to be a key nutrient in counteracting the development of virulence and inhibiting HIV(human immunodeficiency virus) progression to AIDS. It is also required for sperm motility and reduces the depression. Therefore, it is very meaningful that livestock producers generate Se-fortified animal products, such as Se-egg, Se-milk, Se-pork, Se-chicken and Se-beef from the point of producers as well as human heath. However, regulation on Se usage and Se-fortified food/feed is far from being clear in Korea even though Se should be carefully monitored because of its toxicity. Thus, one has to be aware of Se properties when designing Se-fortified animal products.

• Journal of Korean Dental Science
• /
• 제8권1호
• /
• pp.28-35
• /
• 2015

Purpose: To investigate the influence of crown margin design on the stress distribution and to localize critical sites in maxillary canine under functional loading by using three dimensional finite element analysis. Materials and Methods: The bite force of 100 N, 150 N, and 200 N was applied with an angulation of $45^{\circ}$ to the longitudinal axis of tooth. Six models were restored with IPS e.max (Ivoclar Vivadent, Schaan, Liechtenstein) with a different margin design. With lingual ledge and various thicknesses, three different core ceramics were designed in each model. Result: In the core ceramic, the maximum tensile stresses were found at the labiocervical region. In the veneering ceramic the maximum tensile stresses were found at the area where the force was applied in all models. Conclusion: Shoulder and chamfer margin types are acceptable for all-ceramic rehabilitations. A ledge on the core ceramic at cervical region may affect the strength of all-ceramic crowns.

• 한국전자파학회지:전자파기술
• /
• 제3권1호
• /
• pp.33-41
• /
• 1992

본 논문에서는 변분 유한요소법을 통하여 임의의 유전율 텐서를 포함하는 비등방성 매질에 수직으로 입사한 전자파의 전파특성을 고찰하였다. 먼저 유기정리, 리액션 정리, 가역정리 둥에 기초한 새로운 접근 방볍을 통해 변분수식을 유도하였다. 그 다음 유한요소볍을 이용하여 구해진 범함수로부터 여러 전파특성 에 대해 해석하였다. 특히 냉 자기 플라즈마 슬랩과 같은 균질 및 비균질 비둥방성 매질에 평면파가 수직 으로 입사한 경우에 대해 반사계수, 투과계수 및 축비율을 구하였다. 그리고 이 결과들은 기존의 방법과 비교하여 잘 일치함을 보였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.498-503
• /
• 2004

A fundamental function of court sport shoes has been considered as the protection of human feet from unexpected injuries. But, recently its role for improving the playing competency is being regarded as a more important function. In connection with this situation, intensive efforts are being world-widely forced on the development of court sport shoes proving the excellent playing competency, by taking kinesiology and biomechanics into consideration. However, the success of this goal depends definitely on the shoes design based upon the reliable evaluation of shoes functional parts. This paper addresses the application of finite element method to the evaluation of landing impact force of court sport shoes. In order to reflect the coupling effect between leg and shoes accurately and effectively, we construct a fully coupled shoes-leg FEM model which does not rely on the independent experimental data any more. Through the numerical experiments, we assess the reliability of the coupled FEM model by comparing with the experimental results and investigate the landing impact characteristics of court sport shoes.

• 한국가구학회지
• /
• 제21권2호
• /
• pp.157-166
• /
• 2010

Furniture in the modern living environment, inclusive the importance of its practical value, is a plastic element of indoor space, and its artistic value also holds an important position. Moreover, emotional design based on the emotional engineering in a structural change of modern society such as urbanization, small family, aging society is proposed as an important keyword in the modern design. Namely, furniture as an component of modern residential space has been advanced as a human-oriented environmental element considering people's emotional and mental value to the functional satisfaction and artistic and emotional satisfaction. Furniture is a living tool that is much contacted to people, which affects highly on people's body and mind. This means that people's volition action can be naturally induced by furniture design, and that furniture can display a role as an active tool of means to make people's interpersonal communication and interchange. Namely, I think furniture design of emotional interchange that understands furniture user's pattern behavior and pattern, and observes furniture form and structure and functionality on users' relationship affecting on people's emotional stability and interpersonal interchange of emotion, as an indispensable element necessary for producing more human and prosperous environment of life.