Journal of Korean Dental Science

Korean Academy of Dental Science (대한치의학회)
권호 표지
DOI QR코드

DOI QR Code

Influence of Crown Margin Design on the Stress Distribution in Maxillary Canine Restored by All-Ceramic Crown: A Finite Element Analysis

  • Ozer, Zafer (Mersin Vocational High School, Mersin University) ;
  • Kurtoglu, Cem (Faculty of Dentistry, Cukurova University) ;
  • Mamedov, Amirullah M. (Nanotechnology Research Center (NANOTAM), Bilkent University) ;
  • Ozbay, Ekmel (Nanotechnology Research Center (NANOTAM), Bilkent University)
  • Received : 2015.05.13
  • Accepted : 2015.06.20
  • Published : 2015.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Purpose: To investigate the influence of crown margin design on the stress distribution and to localize critical sites in maxillary canine under functional loading by using three dimensional finite element analysis. Materials and Methods: The bite force of 100 N, 150 N, and 200 N was applied with an angulation of $45^{\circ}$ to the longitudinal axis of tooth. Six models were restored with IPS e.max (Ivoclar Vivadent, Schaan, Liechtenstein) with a different margin design. With lingual ledge and various thicknesses, three different core ceramics were designed in each model. Result: In the core ceramic, the maximum tensile stresses were found at the labiocervical region. In the veneering ceramic the maximum tensile stresses were found at the area where the force was applied in all models. Conclusion: Shoulder and chamfer margin types are acceptable for all-ceramic rehabilitations. A ledge on the core ceramic at cervical region may affect the strength of all-ceramic crowns.

Keywords

References

  1. Pjetursson BE, Sailer I, Zwahlen M, Hammerle CH. A systematic review of the survival and complication rates of all-ceramic and metalceramic reconstructions after an observation period of at least 3 years. Part I: single crowns. Clin Oral Implants Res. 2007; 18(Suppl 3): 73-85. https://doi.org/10.1111/j.1600-0501.2007.01467.x
  2. Beier US, Kapferer I, Dumfahrt H. Clinical longterm evaluation and failure characteristics of 1,335 all-ceramic restorations. Int J Prosthodont. 2012; 25: 70-8.
  3. Rekow ED, Harsono M, Janal M, Thompson VP, Zhang G. Factorial analysis of variables influencing stress in all-ceramic crowns. Dent Mater. 2006; 22: 125-32. https://doi.org/10.1016/j.dental.2005.04.010
  4. Qasim T, Ford C, Bush MB, Hu X, Malament KA, Lawn BR. Margin failures in brittle dome structures: relevance to failure of dental crowns. J Biomed Mater Res B Appl Biomater. 2007; 80: 78-85.
  5. Kokubo Y, Tsumita M, Kano T, Fukushima S. The influence of zirconia coping designs on the fracture load of all-ceramic molar crowns. Dent Mater J. 2011; 30: 281-5. https://doi.org/10.4012/dmj.2010-130
  6. Kurtoglu C, Uysal H, Mamedov A. Influence of layer thickness on stress distribution in ceramiccement- dentin multilayer systems. Dent Mater J. 2008; 27: 626-32. https://doi.org/10.4012/dmj.27.626
  7. Kurtoglu C, Demiroz SS, Mehmetov E, Uysal H. Stress distribution and damage mode of ceramicdentin bilayer systems. Mod Phys Lett B. 2008; 22: 1317-27. https://doi.org/10.1142/S0217984908015346
  8. De Jager N, Pallav P, Feilzer AJ. The influence of design parameters on the FEA-determined stress distribution in CAD-CAM produced all-ceramic dental crowns. Dent Mater. 2005; 21: 242-51. https://doi.org/10.1016/j.dental.2004.03.013
  9. Turner MJ, Clough RW, Martin HC, Topp LJ. Stiffness and deflection analysis of complex structures. J Aeronautical Sci. 1956; 23: 805-23. https://doi.org/10.2514/8.3664
  10. Farah JW, Craig RG, Sikarskie DL. Photoelastic and finite element stress analysis of a restored axisymmetric first molar. J Biomech. 1973; 6: 511-20. https://doi.org/10.1016/0021-9290(73)90009-2
  11. Proos KA, Swain MV, Ironside J, Steven GP. Finite element analysis studies of an all-ceramic crown on a first premolar. Int J Prosthodont. 2002; 15: 404-12.
  12. Kamposiora P, Papavasilious G, Bayne SC, Felton DA. Finite element analysis estimates of cement microfracture under complete veneer crowns. J Prosthet Dent. 1994; 71: 435-41. https://doi.org/10.1016/0022-3913(94)90179-1
  13. Hojjatie B, Anusavice KJ. Three-dimensional finite element analysis of glass-ceramic dental crowns. J Biomech. 1990; 23: 1157-66. https://doi.org/10.1016/0021-9290(90)90008-Q
  14. Ozer Z, Mamedov AM, Ozbay E. Modeling and simulation of the ferroelectric based micro gyroscope: FEM analysis. Ferroelectrics. 2013; 446: 46-58. https://doi.org/10.1080/00150193.2013.821002
  15. Luo Y, Wang Z, Chen L, Wu J. Finite element analysis design of a split rotor bracket for a bulb turbine generator. Adv Mech Eng. 2013. doi:10.1155/2013/428416.