• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.1
• /
• pp.13-22
• /
• 1999

The purpose of this investigation was to evaluate the acceptability of the collagen-based xenograft ($Laddec^{(R)}$). Full thickness bone defects were prepared in the calvaria of the rats. In the experimental groups the bone defects were filled with a kind of collagen based xenograft. And bone defects, which left without filling, were used as control groups. Sequential sacrifice was performed at the 1st, 2nd, 4th, 8th, and 16th weeks of experiment. 1. At the 1st week of experiment, infiltration of chronic inflammatory cell was observed in all groups. In the experimental group, resorption of the xenograft was initiated. 2. At the 2nd week of experiment, infiltration of chronic inflammatory cells was decreased in all groups. In the experimental group, active resorption of xenograft and new bone formation from the periphery of the xenograft was observed. 3. At the 4th and 8th weeks of experiment, more resorption of the xenograft and new bone formation with calcification was observed in the experimental group. 4. At the 16th week of experiment, small bone trabecula was formed partially in the control group but that couldn't fill the whole bone defect. In the experimental group, more advanced resorption of xenograft and more new bone formation was observed. However mid portion of the xenograft was still remained without resorption. 5. From this experiment, we concluded that the collagen-based xenograft had some osteoconductive but no osteoinductive property. So the xenograft would be used for the bone defect filling material where rapid bone remodeling is not required.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.2
• /
• pp.110-119
• /
• 1999

The principle of guided tissue regeneration (GTR), as applied to bone healing, is based on the prevention of connective tissue from entering the bony defect during the healing phase. This allows the slower bone producing cells to migrate into and reproduce bone within the defect. The principle of guided tissue regeneration has demonstrated a level of success in regenerating bone defect. Several types of membrane barrier, each one with distinct properties, have been utilized to apply this principle in bone regeneration. The purpose of this study is to introduce and discuss the attributes of rubber dam as a barrier membrane and evaluate whether improved bone regeneration can be achieved by GTR using rubber dam. In the 15 New Zealand white rabbits, full-thickness bone defects on three sites of each rabbit calvaria were made. Non membrane group served as a control and experimental group 1 was covered with rubber dam and group 2 covered with Gore-Tex$^{TM}$ membrane. Macroscopic, radiographic, microscopic examinations were made serially on 1, 2, 3, 6, 12 weeks after operation. The results were as follows: 1. Macroscopically, the control site was collapsed and filled with connective tissue throughout the experimental period. But the defects of experimental groups 1 and 2 were filled with bone-like mass and showed the hard consistency on palpation. 2. Radiographically, the early new bone formation appeared similarly from the host bone in groups 1 and 2. 3. Microscopically, there were much connective tissue at the central part of control site but the defect of group 1 and 2 was filled with the mature bony trabeculae on the 12th week. This results suggest that rubber dam can be effectively used as a barrier membrane for guided bone regeneration.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.99-99
• /
• 2008

To grow the large diameter GaN with high structure and optical quality has been obtained by hydride vapor phase epitaxy(HVPE) method. In addition to the nitridation of $Al_2O_3$ substrate, we also developed a "step-growth process" to reduce or to eliminate the bowing of the GaN substrate caused by thermal mismatch during cool down after growth. The as-grown 380um thickness and 75mm diameter GaN layer was separated from the sapphire substrate by laser-induced lift-off process at $600^{\circ}C$. A problem with the free-standing wafer is the typically large bowing of such a wafer, due to the built in the defect concentration near GaN-sapphire interface. A polished G-surface of the GaN substrate were characterized by room temperature Double crystal X-ray diffraction (DCXRD), photoluminescence(PL) measurement, giving rise to the full-width at half maximum(FWHM) of the rocking curve of about 107 arcsec and dislocation density of $6.2\times10^6/cm^2$.

• Journal of Information Display
• /
• v.4 no.3
• /
• pp.1-5
• /
• 2003

Laser-Induced Thermal Imaging (LITI) is a laser addressed patterning process and has unique advantages such as high-resolution patterning with over all position accuracy of the imaged stripes of within 2.5 micrometer and scalability to large-size mother glass. This accuracy is accomplished by real-time error correction and a high-resolution stage control system that includes laser interferometers. Here the new concept of hybrid system that complement the merits of small molecule and polymer to be used as an OLED; our system can realize easy processing of light emitting polymers and high luminance efficiency of small molecules. LITI process enables the stripes to be patlerned with excellent thickness uniformity and multi-stacking of various functional layers without having to use any type of fine metal shadow mask. In this study, we report a full-color hybrid OLED using the multi-layered structure consisting of small molecules and polymers.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.1
• /
• pp.1-5
• /
• 2008

In this paper, we fabricated pressure difference type gas flow sensor using only dry etching technology by ICP-RIE(inductive coupled plasma reactive ion etching). The sensor's structure consists of a common shear stress type piezoresistive pressure sensor with an orifice fabricated in the middle of the sensor diaphragm. Generally, structure like diaphragm is fabricated by wet etching technology using TMAH, but we fabricated diaphragm by only dry etching using ICP-RIE. To equalize the thickness of diaphragm we applied insulator($SiO_2$) layer of SOI(Si/$SiO_2$/Si-sub) wafer as delay layer of dry etching. Size of fabricated diaphragm is $1000{\times}1000{\times}7\;{\mu}m^3$ and overall chip $3000{\times}3000{\times}7\;{\mu}m^3$. We measured the variation of output voltage toward the change of gas pressure to analyze characteristics of the fabricated sensor. Sensitivity of fabricated sensor was relatively high as about 1.5mV/V kPa at 1kPa full-scale. Nonlinearity was below 0.5%F.S. Over-pressure range of the fabricated sensor is 100kPa or more.

• Journal of Radiation Protection and Research
• /
• v.42 no.1
• /
• pp.48-55
• /
• 2017

Background: Simultaneous detection of neutrons and gamma rays have become much more practicable, by taking advantage of good gamma-ray discrimination properties using pulse shape discrimination (PSD) technique. Recently, we introduced a commercial CLYC system in Korea, and performed an initial characterization and simulation studies for the CLYC detector system to provide references for the future implementation of the dual-mode scintillator system in various studies and applications. Materials and Methods: We evaluated a CLYC detector with 95% $^6Li$ enrichment using various gamma-ray sources and a $^{252}Cf$ neutron source, with validation of our Monte Carlo simulation results via measurement experiments. Absolute full-energy peak efficiency values were calculated for gamma-ray sources and neutron source using MCNP6 and compared with measurement experiments of the calibration sources. In addition, behavioral characteristics of neutrons were validated by comparing simulations and experiments on neutron moderation with various polyethylene (PE) moderator thicknesses. Results and Discussion: Both results showed good agreements in overall characteristics of the gamma and neutron detection efficiencies, with consistent ~20% discrepancy. Furthermore, moderation of neutrons emitted from $^{252}Cf$ showed similarities between the simulation and the experiment, in terms of their relative ratios depending on the thickness of the PE moderator. Conclusion: A CLYC detector system was characterized for its energy resolution and detection efficiency, and Monte Carlo simulations on the detector system was validated experimentally. Validation of the simulation results in overall trend of the CLYC detector behavior will provide the fundamental basis and validity of follow-up Monte Carlo simulation studies for the development of our dual-particle imager using a rotational modulation collimator.

• Macromolecular Research
• /
• v.11 no.5
• /
• pp.368-374
• /
• 2003

Porous scaffolds composed of gelatin and polysaccharides such as hyaluronic acid and $\beta$-glucan were prepared by using the freeze-drying method after cross-linking with l-ethyl-(3-3-dimethylaminopropyl) carbodiimide hydrochloride (EDC). The scaffold had an inter-connected pore structure with the sufficient pore size for use as a support for the growth of fibroblasts. Results for the contact angle and cell attachment confirmed that high gelatin content in a mixture was suitable for cellular attachment and distribution in two- or three-dimensional fibroblast cultures. However, the addition of polysaccharides aroused the synergistic effects of morphologic and mechanical property of gelatin-based scaffolds. To prepare the artificial dermis for the wound dressing to mimic the normal human dermal skin, fibroblasts were isolated from a child's foreskin, and cultured in gelatin-based scaffolds. An in vivo study showed that the artificial dermis containing the fibroblasts enhanced the wound healing rate and re-epithelialization of a full-thickness skin defect rather than the acellular scaffold after one week.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.4
• /
• pp.23-33
• /
• 1999

A finite element method was employed fort thermal and stress analyses of an IGBT module of 3-phase full bridge. The effect of material parameters such as substrate material, substrate area, solder thickness on the temperature and stress distributions of the module packages has been investigated. Thermal analysis results have also been compared by setting of boundary conditions such as equivalent heat transfer coefficient or constant temperature at a base metal surface of the package. The increase of ceramic substrate area up to 3 times does little contribution to the reduction(8.9%) of thermal resistance, while contributed a lot to the reduction(60%) of thermal stress. Thicker solder resulted in higher thermal resistance but did slightly reduced thermal stresses. It is revealed by the stress analysis that maximum stress was induced at the region of copper pads which are bonded with ceramic substrate.

• Clinics in Shoulder and Elbow
• /
• v.21 no.1
• /
• pp.22-29
• /
• 2018

Background: This study is performed to evaluate anchor-related outcomes and complications after arthroscopic rotator cuff repair using 30% ${\beta}$-tricalcium phosphate (${\beta}$-TCP) with 70% poly lactic-co-glycolic acid (PLGA) biocomposite suture anchors. Methods: A total of 78 patients (mean age, $61.3{\pm}6.9years$) who underwent arthroscopic medium-to-large full-thickness rotator cuff tear repair were enrolled. The technique employed 30% ${\beta}$-TCP with 70% PLGA biocomposite suture anchors at the medial row (38 patients, Healix $BR^{TM}$ anchor [Healix group]; 40 patients, Fixone anchor B [Fixone group]). The radiologic outcomes (including perianchor cyst formation or bone substitution) and anatomical outcomes of the healing failure rate were evaluated using magnetic resonance imaging at least 6 months after surgery, the pain visual analogue scale at 3, 6 months, and final follow-up visit, and American Shoulder and Elbow Surgeons scores at least 1 year postoperatively. Anchor-related complications were also evaluated. Results: The perianchor cyst formation incidence was similar for both groups (60.5%, Healix group; 60.0%, Fixone group; p=0.967), although severe perianchor cyst incidence was slightly lower in the Fixone group (15.0%) than in the Healix group (21.1%). There was no occurrence of anchor absorption and bone substitution. No differences were observed in the healing failure rate (13.2%, Healix group; 15.0%, Fixone group; p=0.815) and functional outcome between groups (all p>0.05). Anchor breakage occurred in 5 patients (2 Healix anchors and 3 Fixone anchors); however, there were no major anchor-related complications in either group. Conclusions: No differences were observed in the clinical outcomes of the Healix and Fixone groups, neither were there any accompanying major anchor-related complications.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.2
• /
• pp.220-225
• /
• 1986

This study was conducted to know the effects of temperature and gibberellic acid on the dormancy block-ing of ginseng seeds at different embryo growth stage. Optimum temperature for embryo growth appeared to be I soc at the beginning stage of post ripening (up to dehiscent time), 1$0^{\circ}C$ at middle stage (for 30 days after dehiscence) and 5$^{\circ}C$ at last stage (between 30 and 92 days after dehiscence). And optimum temperature for dehiscence is about 17$^{\circ}C$, also the optimum temperature for dehiscence is higher than that of embryo growth. Germination of ginseng seed with full grown embryo was accelerated at high temperature (25-3$0^{\circ}C$). Germina-tion percentage was 80% at 105th date after dehiscence under 5$^{\circ}C$, 28% at 147th date under 1$0^{\circ}C$, but no germination under the over 15$^{\circ}C$. Gibberellic acid increased the dehiscent rate, whereas the gibberellic acid treatment may not be substituted for effect of low temperature on the germination. Low temperature may be reguired to finish the embryo growth in thickness.