• Journal of the Korean Society of Food Culture
• /
• 제31권6호
• /
• pp.643-651
• /
• 2016

This study was investigated the difference in the quality characteristics of the fermented soybean roasted with different conditions for making chungyukjang. Roasted condition of soybean was decided by pre-test, which was on $140^{\circ}C$ for 21 min, $180^{\circ}C$ 9.5 min, and $220^{\circ}C$ 6 min. Fermented soybean with different roasted condition and conventionally made cheonggukjang were measured for proximate composition, color, pH, amino nitrogen, ammonia nitrogen, free sugar and amino acids. The lightness and yellowness of soybean fermented by conventional method was higher than those of the fermented soybean with roasted soybean. The contents of free sugar of fermented soybean roasted on $220^{\circ}C$ for 6 min (FS220) was the highest among the group and followed by fermented soybean roasted on $180^{\circ}C$ for 9.5 min (FS180), $140^{\circ}C$ 21 min (FS140) and conventional cheonggukjang (FS0). The contents of total free amino acid was highest on fermented soybean roasted on $140^{\circ}C$ for 21 min (FS140) and followed by fermented soybean roasted on $180^{\circ}C$ for 9.5 min (FS180), $220^{\circ}C$ 6 min (FS220) and conventional cheonggukjang (FS0).

• Land and Housing Review
• /
• 제7권4호
• /
• pp.225-237
• /
• 2016

This study is to investigate actual condition of passenger terminals, public facilities which are used by unspecified individuals, with high spread effect of certification system of Barrier Free introduced in 2007, evaluate possibility of the certification and prepare an effective way for certification in order to spread and settle the certification system. According to the investigation on the facilities' equipment level of 349 passenger terminals, which being nationally operated, 217 terminals could be certified and non-certified were 58. And, 29 was evaluated as the passenger terminals with high possibility to get Barrier Free certification by small scale of remodeling. The level of Barrier Free of investigated passenger terminals, according to the actual condition with certification index, were 40~55 percent. While the level of Barrier Free of internal facilities of the terminals was over 90percent, the level of sanitary facilities, information facilities, etc. fell short of 50 percents. In this study, pilot project of Barrier Free certification is proposed for enhance of passenger terminal facilities. Moreover, the selection of passenger terminals with high possibility of certification, local governments' strong will as the targets of pilot project for improvement of amenity level and Barrier Free certification and monitoring the project results are the way of the project.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제18권2호
• /
• pp.199-204
• /
• 1989

The extracts of the fresh and dried squid(Sepiella manidroni) were prepared with water and 70% ethanol at different extraction time and temperature, and the major free sugars in the squid extracts and the effects of extract condition on the composition of free sugars were investigated. Major free sugars in the extracts were glucose, fructose and ribose, and these components was above 80% of total free sugars. Amount of free sugar in the extracts of fresh squid extracted with water were higher than that of extracted with 70% ethanol, but 70% ethanol, in the dried squid, was more effective than extracted with water. The free sugar contents in the extracts incensed until 2 to 3 hours of extrction at below $100^{\circ}C$ and then decreased slowly, but in the high temperature as $120^{\circ}C$, showed a remarkably decrease after 1 hour of extraction.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.481-488
• /
• 2003

A fluid-structure-isolator interaction program was developed in this study. The behavior of liquid regions are simulated by the boundary element method, and then the technique of analyzing the free surface motion in time domain is developed by using the nonlinear free surface boundary condition(NFBC) and the condition of interface between the structure and the fluid. Structure regions are modeled by the finite element method. In order to construct the governing equation of the fluid structure interaction(FSI)problem in time domain, the finite elements for a structure and boundary elements for liquid are coupled using the equilibrium condition, the compatibility condition and NFBC. The isolator is simulated by equation proposedin 3D Basis Me. In order to verify the validity and the applicability of the developed fluid- structure -Isolator interaction program, The horizontal forced vibration analysis was performed. The applicability of the developed method is verified through the artificial seismic analysis of real size liquid storage tank.

• Journal of Ocean Engineering and Technology
• /
• 제4권1호
• /
• pp.55-61
• /
• 1990

For the tracking of three dimensional free surface motions, a method referred to as the Volume of Fluid(VOF) algorithm is extended. In order to calculate the slope of three dimensional free surface which is the most important for the advection algorithm that decides the amount of fluid from cell to cell and for the application of free surface boundary condition, a simple method utilizing two dimensional slope informations is introduced. The extended algroithm is tested by demonstrating the simulation of a propagating sinusoidal wave through the channel whose width changes abruptly.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.876-879
• /
• 2003

The principal problems in development of dielectric paste materials for PDP(plasma display panel)are PbO free paste and low melting temperature. We prepared PbO free paste from glasses in the system $BaO-ZnO-B_2O_3-V_2O_5$. DTA, XRD and SEM were used to study and characterize $BaO-ZnO-B_2O_3-V_2O_5$ glasses. PbO free paste developed at this paper has thermal expansion of $74{\times}10^{-7}/^{\circ}C$, DTA transformation point of $460^{\circ}C$, and firing condition of $560^{\circ}C$, 10min.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.267-270
• /
• 2007

Korea Aerospace Research Institute(KARI) made a scramjet engine test contract with the University of Queensland in October 2006. The experiments were conducted at Mach 7.6, Altitude 31.2 km condition in the T4 free piston-driven shock tunnel in June 2007. In this paper, the short introduction and data processing technique of the T4 free piston-driven shock tunnel will be explained.

• Journal of Ship and Ocean Technology
• /
• 제4권1호
• /
• pp.11-20
• /
• 2000

Reynolds-averaged Navier-Stokes equations are numerically solved using a secondorder finite difference method for the analysis of turbulent flows around single and tandem hydrofoils advancing under the free surface. The location of the free surface, not known a priori, is computed from the kinematic free surface condition and the computational grid is conformed at each iteration to the free surface deformation. The eddy viscosity model of Baldwin-Lomax is employed for the turbulence closure. The method is validated through the comparision of the numerical results with the experimental data for a single hydrofoil of a Joukowski foil section. A computational study is also carried out to investigate the effect of the submergence depth and the Froude number on the lift and the drag of the hydrofoil. For tandem hydrofoils, computations are performed for several separation distances between the forward and aft foils to see the interference effect. The result shows clearly how the lift and drag change with the separation distance.

• Proceedings of the KWS Conference
• /
• 대한용접접합학회 2003년도 추계학술발표대회 개요집
• /
• pp.83-85
• /
• 2003

This paper is investigated the shear strength by using the micro shear-punch test method for Sn-37Pb alloy, binary and ternary alloys of environment-friendly Pb-free solder alloys which would be surely applicable to the electronic packages. As a result, in case of Max. shear strength, Sn-4Ag-0.5Cu has the highest value and Sn-37Pb has the lowest value on every condition of experiment temperature. Also, In case of Pb-free solder joint specimens, it was found that Pb-free solder alloys have higher value of shear strength than eutectic Sn-Pb solder alloy and Sn-4Ag-0.5Cu has the highest value.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 춘계 학술대회논문집
• /
• pp.156-161
• /
• 1998

This describes a numerical method for predicting the incompressible unsteady laminar three-dimensional flows of fluid behaviour with free-surface. The elliptic differential equations governing the flows have been linearized by means of finite-difference approximations, and the resulting equations have been solved via a fully-implicit iterative method. The free-surface is defined by the motion of a set of marker particles and interface behaviour was investigated by way of a 'Lagrangian' technique. Using the GALA concept of Spalding, the conventional mass continuity equation is modified to form a volumetric or bulk-continuity equation. The use of this bulk-continuity relation allows the hydrodynamic variables to be computed over the entire flow domain including both liquid and gas regions. Thus, the free-surface boundary conditions are imposed implicitly and the problem formulation is greatly simplified. The numerical procedure is validated by comparing the predicted results of a periodic standing waves problems with analytic solutions or experimental results from the literature. The results show that this numerical method produces accurate and physically realistic predictions of three-dimensional free-surface flows.