• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.993-994
• /
• 2006

현대 Mobile module에 알맞은 IP들은 고속에서 얼마나 소비 전력을 낮춰주느냐 하는 방향으로 진화하고 있다. 본 논문에서는 저전력 구현을 위해 digital block에서의 신호를 제어해주는 방법을 사용한 UWB system용 6B 2.5Gsample/s Flash ADC를 소개한다. 소개된 ADC는 2.5GS/s의 clock, 1240MHz의 input 신호에서 36,7dB의 SNDR과 5.80 비트의 ENOB를 가지며 385mW의 전력을 소모한다.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.3
• /
• pp.430-435
• /
• 2008

In the paper, an algorithm called a Constraint algorithm is proposed to solve the fan-in problem occurred in ADC encoding circuits. The Flash ADC architecture uses a double-base number system (DBNS). The DBNS has known to represent the multi-dimensional logarithmic number system (MDLNS) used for implementing the multiplier accumulator architecture of FIR filter in digital signal processing (DSP) applications. The authors use the DBNS with the base 2 and 3 to represent binary output of ADC. A symmetric map is analyzed first, and then asymmetric map is followed to provide addition read DBNS to DSP circuitry. The simulation results are shown for the Double-Base Integer Encoder (DBIE) of the 6-bit ADC to demonstrate an effectiveness of the Constraint algorithm, using $0.18{\mu}\;m$ CMOS technology. The DBIE’s processing speed of the ADC is fast compared to the FAT tree encoder circuit by 0.95 GHz.

• Journal of IKEEE
• /
• v.27 no.3
• /
• pp.333-339
• /
• 2023

The global market for wearable devices is growing, driving demand for efficient PMICs. Wearable PMICs must be highly energy-efficient despite limited hardware resources. Advancements in process technology enable low-power consumption, but traditional analog LDO regulators face challenges with reduced power supply voltage. In this paper, a novel ADC design with a 3-bit continuous-time flash ADC for the coarse loop and a 5-bit discrete-time SAR ADC for the fine loop is proposed for digital LDO, achieving a 34.78 dB SNR and 5.39 bits ENOB in a 55-nm CMOS technology.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.549-550
• /
• 2008

This paper proposed and designed the modified flash analog-to-digital converter(ADC). The speed of new architecture is similar to conventional flash ADC but the die area consumption is much less due to reduce numbers of comparators. The circuits which are implemented in this paper is simulated with LT SPICE and layout with Electric tools of computer.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.1
• /
• pp.76-81
• /
• 2009

A novel design method of time-interleaved subranging ADC is presented. We use the bisection method to let only half of comparators in typical subranging ADC working in every clock cycle. Thus, we are able to reduce the number of comparators by half. It is possible to reduce the die size. An example of 8-bit time-interleaved subranging ADC operates at 40MHz sampling rate and 1.8V supply voltage is demonstrated. The power consumption of the proposed circuit is only 10mV with SPECTRE simulation. Compared with the typical subranging ADC, our bisection method is able to reduce up to 40% in die size.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.6
• /
• pp.706-711
• /
• 2014

A low power 6-bit flash ADC that uses an input voltage range detection algorithm is described. An input voltage level detector circuit has been designed to overcome the disadvantages of the flash ADC which consume most of the dynamic power dissipation due to comparators array. In this work, four digital input voltage range detectors are employed and each input voltage range detector generates the specific clock signal only if the input voltage falls between two adjacent reference voltages applied to the detector. The specific clock signal generated by the detector is applied to turn the corresponding latched comparators on and the rest of the comparators off. This ADC consumes 68.82 mW with a single power supply of 1.2V and achieves 4.3 effective number of bits for input frequency up to 1 MHz at 500 MS/s. Therefore it results in 4.6 pJ/step of Figure of Merit (FoM). The chip is fabricated in 0.13-um CMOS process.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.1
• /
• pp.28-35
• /
• 2007

This paper presents a high-speed flash analog-to-digital converter (ADC) for ultra wide band (UWB) receivers. In this flash ADC, the interpolating technique is adopted to reduce the number of the amplifiers and a linear and wide-bandwidth interpolating amplifier is presented. For this ADC, the transistor size for the cascaded stages is inversely scaled to improve the trade-off in bandwidth and power consumption. The active inductor peaking technique is also employed in the pre-amplifiers of comparators and the track-and-hold circuit to enhance the bandwidth. Furthermore, a digital-to-analog converter (DAC) is embedded for the sake of measurements. This chip has been fabricated in $0.13{\mu}m$ 1P8M CMOS process and the total power consumption is 113mW with 1V supply voltage. The ADC achieves 4-bit effective number of bits (ENOB) for input signal of 200MHz at 5-GSample/sec.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.3
• /
• pp.224-229
• /
• 2008

In the paper, a new Constraint algorithm is proposed to solve the fan-in problem occurred in the encoding circuitry of an ADC. The Flash ADC architecture uses a Double-Base Number System(DBNS). The DBNS has been known to represent the Multidimensional Logarithmic Number System (MDLNS) used for implementing the multiplier accumulator architecture of FIR filter in Digital Signal Processing (DSP) applications. The authors use the DBNS with the base 2 and 3 in designing ADC encoder circuits, which is called as Double Base Integer Encoder(DBIE). A symmetric map is analyzed first, and then asymmetric map is followed to provide addition ready DBNS for DSP circuitry. The simulation results of the DBIE circuits in 6-bit and 8-bit ADC show the effectiveness of the Constraint algorithm with $0.18{\mu}m$ CMOS technology. The DBIE yields faster processing speed compared to the speed of Fat Tree Encoder (FAT) circuits by 17% at more power consumption by 39%.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.2
• /
• pp.98-107
• /
• 2013

This work describes a 13b 100 MS/s 0.13 um CMOS four-stage pipeline ADC for 3G communication systems. The proposed SHA-free ADC employs a range-scaling technique based on switched-capacitor circuits to properly handle a wide input range of $2V_{P-P}$ using a single on-chip reference of $1V_{P-P}$. The proposed range scaling makes the reference buffers keep a sufficient voltage headroom and doubles the offset tolerance of a latched comparator in the flash ADC1 with a doubled input range. A two-step reference selection technique in the back-end 5b flash ADC reduces both power dissipation and chip area by 50%. The prototype ADC in a 0.13 um CMOS demonstrates the measured differential and integral nonlinearities within 0.57 LSB and 0.99 LSB, respectively. The ADC shows a maximum signal-to-noise-and-distortion ratio of 64.6 dB and a maximum spurious-free dynamic range of 74.0 dB at 100 MS/s, respectively. The ADC with an active die area of 1.2 $mm^2$ consumes 145.6 mW including high-speed reference buffers and 91 mW excluding buffers at 100 MS/s and a 1.3 V supply voltage.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.4
• /
• pp.318-325
• /
• 2008

A 1.2 V 7-bit 1 GS/s CMOS flash ADC with an interpolation factor of 4 is implemented by using a $0.13\;{\mu}m$ CMOS process. A digital calibration of DC reference voltage is proposed for the $1^{st}$ preamp array to compensate for the input offset voltage of differrential amplifiers without disturbing the high-speed signal path. A 3-stage cascaded voting process is used in the digital encoder block to eliminate the conescutive bubbles up to seven completely, if the $2^{nd}$ preamp output is assumed to have a single bubble at most. ENOB and the power consumption were measured to be 5.88 bits and 212 mW with a 195 MHz $400\;mV_{p-p}$ sine wave input.