• Title/Summary/Keyword: fixed form

Search Result 803, Processing Time 0.029 seconds

Derivation of Asymptotic Formulas for the Signal-to-Noise Ratio of Mismatched Optimal Laplacian Quantizers (불일치된 최적 라플라스 양자기의 신호대잡음비 점근식의 유도)

  • Na, Sang-Sin
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.5C
    • /
    • pp.413-421
    • /
    • 2008
  • The paper derives asymptotic formulas for the MSE distortion and the signal-to-noise ratio of a mismatched fixed-rate minimum MSE Laplacian quantizer. These closed-form formulas are expressed in terms of the number N of quantization points, the mean displacement $\mu$, and the ratio $\rho$ of the standard deviation of the source to that for which the quantizer is optimally designed. Numerical results show that the principal formula is accurate in that, for rate R=$log_2N{\geq}6$, it predicts signal-to-noise ratios within 1% of the true values for a wide range of $\mu$, and $\rho$. The new findings herein include the fact that, for heavy variance mismatch of ${\rho}>3/2$, the signal-to-noise ratio increases at the rate of $9/\rho$ dB/bit, which is slower than the usual 6 dB/bit, and the fact that an optimal uniform quantizer, though optimally designed, is slightly more than critically mismatched to the source. It is also found that signal-to-noise ratio loss due to $\mu$ is moderate. The derived formulas can be useful in quantization of speech or music signals, which are modeled well as Laplacian sources and have changing short-term variances.

A Maximally Disjoint Multipath Routing Protocol Based on AODV in Mobile Ad Hoc Networks (모바일 애드혹 네트워크에서의 AODV 기반 치대 비중첩 다중경로 라우팅 프로토콜)

  • Kim Jungtae;Moh Sangman;Chung Ilyong
    • The KIPS Transactions:PartC
    • /
    • v.12C no.3 s.99
    • /
    • pp.429-436
    • /
    • 2005
  • A mobile ad hoc network (MANET) is a collection of mobile nodes without any fixed infrastructure or my form of centralized administration such as access points and base stations. The ad hoc on-demand distance vector routing (AODV) protocol is an on-demand routing protocol for MANETs, which is one of the Internet-Drafts submitted to the Internet engineering task force (IETF) MANET working group. This paper proposes a new multipath routing protocol called maximally disjoint multipath AODV (MDAODV), which exploits maximally node- and link-disjoint paths and outperforms the conventional multipath protocol based on AODV as well as the basic AODV protocol. The key idea is to extend only route request (RREQ) message by adding source routing information and to make the destination node select two paths from multiple RREQs received for a predetermined time period. Compared to the conventional multipath routing protocol, the proposed MDAODV provides more reliable and robust routing paths and higher performance. It also makes the destination node determine the maximally node- and link-disjoint paths, reducing the overhead incurred at intermediate nodes. Our extensive simulation study shows that the proposed MDAODV outperforms the conventional multipath routing protocol based on AODV in terms of packet delivery ratio and average end-to-end delay, and reduces routing overhead.

An Analysis of Teaching Statistical Graphs in Elementary School Mathematics Textbooks (초등학교 수학 교과서에 나타난 통계 그래프 지도 방법 분석)

  • Lim Ji Ae;Kang Wan
    • Journal of Elementary Mathematics Education in Korea
    • /
    • v.7 no.1
    • /
    • pp.65-86
    • /
    • 2003
  • Mathematics textbooks are substitutive showing real characters of didactic transposition in pseudo-contextualization and pseudo-personalization. This study analyzed statistical graphs in elementary school mathematics textbooks according to the first to the 7th curriculum in Korea. It focused on the didactic principles used in those methods through those view of Didactic Transposition Theory. The features of the elementary school mathematics textbooks in Korea are investigated and described ethnomethodologically according to each curriculum periods in dividing bar graph, line graph, pictograph, graph of ratio, histogram. The teaching sequences and methods of the statistical graphs, order and methods of sub-learning activities, teaming data, matter of the learning activity indicator were summarized. Usually, the teaching sequences, excepting the graphs of ratio, statistical graphs are introduced in the second semester of each grade. The graph of ratio is introduced in the first semester of 6th grade. As a result of analysing sub-Loaming activities, using them increased from the first to the 7th curriculum and its form was fixed constructive and stable at the 4th curriculum textbooks. As a result of analysing the teaming data, the data of the social aspects are used more frequently and the data of the individual preferences trended more gradually. As a result of analysing the matter of the teaming activity indicators, concept-explanation question style were used more frequently. Statement-practice style and consideration style trended gradually. Concluding remarks are: First, the didactic transposition of the elementary school mathematics textbooks developed systematically according to the first to the 7th curriculum; Second, mathematics textbooks gradually introduced the positive learning style of activity and the learners' spontaneousness; Third, more concrete practice activities and reflective activities were variously introduced considering the level and interest of each elementary student.

  • PDF

Electron Microscopic Observations on the Endoplasmic Reticulum and Golgi Complex during Spermiogenesis in the Long-Fingered Bat (Miniopterus schreibersi fuliginosus Hodgson) (한국산 긴날개박쥐 (Miniopterus schreibersi fuligino년)의 정자변태동안의 소포체와 골지체에 관한 전자현미경적 관찰)

  • Choi, Byung-Jin;Son, Sung-Won;Lee, Jung-Hun;Lee, Kae-Il
    • Applied Microscopy
    • /
    • v.28 no.4
    • /
    • pp.603-613
    • /
    • 1998
  • The present study was designed in order to observe relationship between the endoplasmic reticulum and the Golgi complex during spermiogenesis of the long-fingered bat (Miniopterus schreibersi fuliginosus). The testes were obtained from adult bats and treated with the prolonged osmification or fixed with ferrocyanide reduced osmiun. In the Golgi phase, The Golgi complex shows an oval shape, and was composed of a cortex and a medullar enclosing acrosome. The Golgi vacuoles with electron-dense granules of crescent shape were fused with each other. The smooth endoplasrnic reticulum was scattered in all the area of the cytoplasm. In the cap phase, The Golgi complex was crescent in shape, and faced to a nucleus. Large and small vesicles were fused with each other, and then fused with a acrosomal vacuole. The rough endoplasmic reticulum was close to the large Golgi vacuole. In the acrosome phase, The Golgi complex was moved to behind of the acrosome face. Small vesicles were fused with an acrosome, and cisternae of the trans-face of Golgi complex was connected with an acrosome in the early acrosome phase. The smooth endoplasmic reticulum was distributed in the cytoplasm. The annulate lamellar was originated from a radial body-annulate lammellae complex. In the maturation phase, The Golgi complex with dilated cistrern appeared in the cytoplasm, and also, annulate lamellar was observed in the cytoplasm. The connection of the annulate lamellar with the cistern of radial body suggests that an annulate lamellar seems to be closely related to radial body. The smooth endoplasmic reticulum was scattered in the cytoplasm in the early Golgi phase, but annulate lamellar-radial body complex which might be a residual and disappearing form of the smooth endoplasmic reticulum appeared in the acrosome phase. The Golgi complex steadily remained in the late maturation phase when the endoplasmic reticulum began to disappear from the cytoplasm: the Golgi complex was still occurred after acrosome formation. The observations obtained in the present study, which was characterized by the presence of the Golgi complex in the late maturation phase, suggests that the Golgi complex may play an important role also even after the acrosome formation.

  • PDF

A Study on the Posibility of Pattern Design Using CAD System for Patternist with Concentration on the Change of Bodice (CAD시스템을 이용한 패터니스트의 디자인 패턴 셜계의 활용방안에 관한 연구 - Bodice변형 디자인을 중심으로 -)

  • 박선경
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.21 no.4
    • /
    • pp.769-781
    • /
    • 1997
  • The purpose of this research is to show how to use the patternist's CAD system in order to make design patterns efficiantly. Using the PAD System Technologies company's PAD System Module, which is very officiant in designing patterns, the basic pattern or design pattern can be designed and applyed to the Sample Module, thus, then it could manufacture, retouch or choose a model, making it posible to go to the next level which is seam patterns for industrial use. By understanding the change of the design that is chosen through the design pattern making and Sample Module process', this study is presentated a plan on how to utilize the patternist's working adaption ability by the CAD system, and also considered the problems in using it. Ability of Design Confrontation of CAD System: 1) The result of an operation can be saved and retouched. On a saved list the patterns can be chosen and changed, thus, making it posible to complete a design very quickly. 2) When sewing every designed pattern in Sample Module, the model can be operated merely by selecting each sewing position, thus creating the same effect of a designer's muslin sample process in a much lesser time. Point at issue in the utilization CAD system: 1) When combining two darts into one place the amounts of darts that are already these have to be erasers, and then, the two darts points are moved that place, thus, containing them, which is very conplicated. 2) When making a gathering, because system can only be recognized in a opend line, the pattern should be separated in order to put a gathering inside a pattern. 3) In order to readjust the amounte of dart. The dart is erased first and then made new dart again. 4) When making tucks in a Sample Module, the form that gets narrow towards the pivot point can not be recognized so the sewing lines of the tucks is adjusted into parallel lines. 5) The Sample Module 3D operation can not attach the bodice to the shirts, instead they become fixed into each other. In the case of shoulder line tucks the amounts of pleats can not be expanded draperary naturally, thus, making it hard to showing the silhouette accurately. If these problems are solved, especially if the silhouette of a model can be created to have natural drapery in the 3D Module, models can be shown on the screen in possible to compare and examine even a change of a detail, by designing this 3D Module Production sample process will be more effective, thus, making the CAD system more useful in sewing design process.

  • PDF

The Present Status Analysis of Interior Planning in a Fitness Center Inside an Apartment Complex (공동주택단지 내 휘트니스 센터 시설현황 분석에 관한 연구)

  • Cho Young-Youn
    • Korean Institute of Interior Design Journal
    • /
    • v.14 no.4 s.51
    • /
    • pp.87-94
    • /
    • 2005
  • Lately due to the sudden growth of the construction of an apartment complex in domestic market, many construction companies are eager to provide various public facilities to increase the apartment distribution rate. An introduction of a fitness center is popularized as a part of such development. There has been a continuing development in a private fitness based on analyzing the user's data. However a public fitness is quite different from the private in terms of a user's classification, preference rate, the pattern of use, and location which requires a different facility plan. Nevertheless, all these days a public fitness in an apartment house has been developed without a specific facility plan based on relevant materials. It is worried that such development would cause the facilities not to function as appropriate resident facilities and sink to idle ones. Therefore the purpose of this paper is to make the standard considered in facility planning in future and the base to guide an applying method. In the paper the present condition of fitness centers inside apartment houses has been compared to analyze the progress of the existing facilities and the appropriateness of the organization and the structure division. The result of the research shows that public resident facilities is not the place to perform passive role for fixed activities but one to form a community through the human relationship based on the facility. Therefore a fitness center inside the apartment complex have to be designed to provide service and leisure space as one of main community facilities for residents. To obtain this purpose, when choosing facilities of an apartment complex, first of all the residents' standard of living, apartment size, residents' distinction rate of age and sex, the needs of the times should be fully considered Secondly, the size of each facility space have to be decided based on the practical data analysis in facility use such as space preference, average staying time. Also, future living culture requires the change of the function and space according to the change of social values, so continuing research and data analysis are required to related to fitness center inside an apartment complex in order to present systematic approaching method and the paper will be expected to be a little step toward it.

Finding a Minimum Fare Route in the Distance-Based System (거리비례제 요금부과에 따른 최소요금경로탐색)

  • Lee, Mee-Young;Baik, Nam-Cheol;Nam, Doo-Hee;Shin, Seon-Gil
    • Journal of Korean Society of Transportation
    • /
    • v.22 no.6
    • /
    • pp.101-108
    • /
    • 2004
  • The new transit fare in the Seoul Metropolitan is basically determined based on the distance-based fare system (DBFS). The total fare in DBFS consists of three parts- (1) basic fare, (2) transfer fare, and (3) extra fare. The fixed amount of basic fare for each mode is charged when a passenger gets on a mode, and it proceeds until traveling within basic travel distance. The transfer fare may be added when a passenger switches from the present mode to another. The extra fare is imposed if the total travel distance exceeds the basic travel distance, and after that, the longer distance the more extra fare based on the extra-fare-charging rule. This study proposes an algorithm for finding minimum fare route in DBFS. This study first exploits the link-label-based searching method to enable shortest path algorithms to implement without network expansion at junction nodes in inter-modal transit networks. Moreover, the link-expansion technique is adopted in order for each mode's travel to be treated like duplicated links, which have the same start and end nodes, but different link features. In this study, therefore, some notations associated with modes can be saved, thus the existing link-based shortest path algorithm is applicable without any loss of generality. For fare calculation as next steps, a mathematical formula is proposed to embrace fare-charging process using search process of two adjacent links illustrated from the origin. A shortest path algorithm for finding a minimum fare route is derived by converting the formula as a recursive form. The implementation process of the algorithm is evaluated through a simple network test.

Belle Epoque and Dadaism in the Modern Culture (벨 에포크와 다다이즘 - 근대문화의 총체와 해체)

  • Lee, Byung Soo
    • Cross-Cultural Studies
    • /
    • v.33
    • /
    • pp.171-192
    • /
    • 2013
  • The article is a research about the Belle Epoque era and Dadaism in the modern culture as a whole and separate. The years from 1890s to 1914, is known as the Belle Epoque era, in which the European continent including France had developed the climax of the modern culture after the Renaissance. At the same time, it was the period where the postmodern developments were being spread, leading to the present days. Moreover, the main ideologies in art that led to the cultural advancement of the time were impressionism, cubism, art nouveau, evolutionized painting category, symbolism and futurism. It was a literature category that was maintained to present Dadaism and surrealism. Dadaism began since the magazine, Bulletin Dada was published, originating in 1916 by Tristan Tzara of Zurich, Switzerland during the WWI. The extreme motto that the Dadaists supported was a contradiction, as they had to dissolve from their own art movements and expression techniques. However, until Andre Breton introduced 'Manifeste du Surrealisme' in 1924, the "Dada group" had a tremendous influence in France as an epicenter and rejected the modern cause and art that continued during the time, thus attempting its dissolution. First, they rejected the ideology, ethics and customs of rationalism from the previous system and demonstrate an anarchical and anti-bourgeoisie characteristic. They also reject the French lucid thoughts and the artistic techniques. They strongly emphasized on their motto "The idea is created from the mouth", while reframing from the philosophical ideology and at the same time, attempting to express the psychical unconsciousness. Second, the most important catchphrase that the Dadaists supported was the theory of negation. The question "Why do you write?" connotes the negative consciousness about the artistic value and the stereotyped method of the preexisting writing and drawing. Third, the Dadaists bring forward a radical query about all of the former esthetic and morals, and reveal an admirable resistance spirit. They emphasized on the slogan "Dada, means nothing" and insist on 'the anti-literal Dada, anti-artistic Dada, anti-musical Dada'. The Dadaist movement manifested their resistant spirit and the new artistic spirit through the publication of , , and most importantly through the magazine . Fourth, the Dadaists embodied the volume, density, and quality into an image through the auto-technical, cubistic writings and drawings. They ignored the fixed form of arrangements, verses, and rhymes of a poetic diction. The Dadaists utilized an unfamiliar and inversed expression method of applying the combination of the size of print, or capital letters and lowercase letters, even combining printed and handwritten writings. As presented, the auto-technical and cubistic characteristic of expressing the auto-psychical ideology into writing is called as the radical aesthetic and moral and can be considered as the most essential cause of the Dadaists' avant-garde features. As a conclusion, Dadaism demonstrated dual characteristics of consuming the nutritive elements of the modern culture through the most powerful resistance and liberation of the artistic movement of the Belle Epoque era, where at the same time, it deconstructed the modern art. By revolting against the former grounds and expression techniques, and dominating the era with the new artistic spirit, their resistant actions were artistic movements that symbolized the dissolution of the modern times. Moreover, the Dada's expressionism and resistance of saying "There's nothing" can be evaluated as postmodernity's initiative of outweighing the modern history and opening the door for new period of nowadays.

How Different is Pragmatism from Utilitarianism? (실용주의는 공리주의인가?)

  • Ju, seon-hee
    • Journal of Korean Philosophical Society
    • /
    • v.123
    • /
    • pp.379-407
    • /
    • 2012
  • The main purpose of this paper is to make a case for the availability of pragmatist ethics by showing the differences between utilitarianism and pragmatism. In this paper, drawing on Dewey's view, I show that Bentham and Mill were doomed to failure because they both regarded moral conduct not as a process but as a fixed act, the remarkable differences between their views notwithstanding. Besides, I also show that pragmatism distinguishes itself from utilitarianism by its focus on the aspect of the amendment of a conduct rather than its attainment. Pragmatist ethics works on the assumption that moral conduct arises only in conscious experience. What pragmatists mean by consciousness is not an ability just given to haman, but a function emerging from the human interaction with his environment. Therefore, morality is extended from and restricted by experience, because it is grounded in concrete experience, but not in the transcendental nor a priori realm. Since pragmatism suggests the possibility of "ethics without principles" in that it works through the way which successfully rejects the traditional absolutist ethics, while avoiding the downslide to a nihilistic form of skepticism. Thus, it may serve as a third view that overcomes a seriously divergent situation of the current ethical arguments. In other words, starting from the very nature of experience, pragmatist ethics offers a 'bottom-up' ethics, instead of a 'top-down' one. This reconstructive reading of pragmatism away from utilitarianism is expected to offer a more comprehensive account of our moral experience in the pluralistic world of diverged values.

Rehabilitation with implant-supported fixed dental prostheses using digital duplication technique on customized artificial tooth, interim denture and implant surgical template: A case report (디지털 복제로 만든 맞춤형 인공치로 제작한 임시의치와 임플란트 수술용 템플릿을 통한 임플란트 지지형 고정성 보철 수복 증례)

  • Jeong, Dae Gil;Oh, Kyung Chul;Shim, June Sung;Park, Ji-Man
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.57 no.4
    • /
    • pp.397-404
    • /
    • 2019
  • Bone and soft tissue conditions are important for successful implant treatment. But, the placement itself is also very important. Implants which is installed in the wrong position result in the biological, esthetical and mechanical problems. In order to place an implant in the correct position, the final restoration and diagnostic wax-up should be considered prior to the surgery. If the artificial teeth for the interim denture are directly transferred from the diagnostic wax-up, the operator can try the form of diagnostic wax-up in the mouth. If the surgical template is produced by duplicating the interim denture, the implant can be placed in the planned position. In this case, the polymethyl methacrylate (PMMA) artificial tooth was precisely milled by the digital duplication of diagnostic wax-up. And interim denture was fabricated by using these milled teeth. After the patient adapted for a sufficient period, the implant was placed at the planned position with surgical template produced by duplicating the interim denture. After confirming sufficient osseointegration, the final prostheses were made to reflect the shape of diagnostic wax-up. Through this procedure, the satisfactory functional and esthetic outcome could be acquired.