• Geotechnical Engineering
• /
• v.14 no.5
• /
• pp.129-142
• /
• 1998

This research is focused on the inducement of the constitutive equation considering the creep strain component and on the development of a finite element method program. The purpose of this research was to contribute to the design of construction structures or to the construction management in soft clay ground through predicting the long-term strain of construction structures reasonably bused on the above program. Modified Cam Clay model was adopted to describe the elastic-plastic behavior of clayey soil. And in the calculation of the creep sprain, the secondary coefficient of consolidation C. was applied for considering the volumetric creep element and the constants m, $\alpha$, A were rosed by the empirical creep equation proposed by Singh 8E Mitchell for considering the deviatoric creep element. To examine the reliability of the program which is developed in this study, the estimated values by this program were compared with the theoretical solution and the experimental results. And the applicability of the developed program was found to be reliable from the sensitive analysis of each parameters used in this study. According to the results obtained from the application of the program on the field measurement data, the estimated values by the program were found with be consistent with the actual values. And from the analysis of the displacement of embankments, the case of considering the creep behavior induced much fower errors than the case of neglecting it. But the results obtained from considering the volumetric creep behavior only were slightly underestimated the results from considering the deviator creep behavior showed the slightly overestimated values. Therefore, it remains the task of further studios to develop the laboratory test devices to obtain the reliable creep parameters, and to select the appropriate soil parameters, etc.

• Journal of the Korea Institute of Building Construction
• /
• v.4 no.3
• /
• pp.109-116
• /
• 2004

Normally easy task of plat in urban architecture is that using underground full of activities for increase building site efficiency. Especially for using underground space for the parking lot. Also utilize underground is more increase for fulfill requirement in modern society considered with environmental friendly architecture. The primary objective of this study is to apply analyzed formal foundation type for selecting the optimum type of parking lots considered with structural stability, economical efficiency, construction efficiency, construction duration. This study aim to on criteria decided through the questionaries for the selection considered with in the scale of second stories parking lots underground, parking volume is 80 and reinforced concrete structure. The bearing capacity is 6～8m and downward from surface, healthy ground bearing capacity is 40 t/m2. This study comparative analysis and discuss economical efficiency, construction efficiency, construction duration based constructivist stability which applied Single foundation, Mat foundation, Drop Mat foundation. The result of this study is as follows: First, the result of economical efficiency is that on the basis of single foundation, Drop Mat foundation is 1.88, Mat foundation 2.04 as a comparative analysis on the basis of total construction cost included material cost, labor coast and machinery cost. Second, the result of construction efficiency order is single foundation, Drop Mat foundation, Mat foundation as a comparative analysis on the based connected characteristics. Third, the result of construction duration is that on the basis of Mat Foundation, Drop Mat foundation is 1.33, single foundation is 1.87 as a comparative analysis Critical Path. Forth, Each foundational type characteristics order through the matrix method is that overall each formal type of foundation contraries at economical efficiency and construction efficiency, construction duration. Also expect contradiction between engineers and owners due to engineer pursuit construction duration and ewer to begin with economical efficiency. Fifth, The selection of suitable foundation formal type needs that based consider project characteristic and field condition as according to above result of a comparative analysis. As a result, a comparative analysis economical efficiency, construction efficiency, construction duration of Mat foundation, Drop Mat foundation, single foundation with 3Bay reinforced structure underground parking lots on the healthy ground.

• Korean Journal of Occupational Health Nursing
• /
• v.10 no.2
• /
• pp.142-152
• /
• 2001

This study examined all the papers published in the Journal of Occupational Health Nursing from 1991 to May 2000 based on an objective frame of evaluation. The purpose of study is to prospect the trend of occupational nursing research and to provide an optimal direction for future occupational nursing service. The results of total 94 studies were analyzed as follows. 1. The number of papers published in 1991-1992, 1993-1995, 1996-1997 was not significantly increased. However, the number of papers were obviously increased after 1998. 2. In the design of research, survey studies were definitely dominant. But, they are gradually decreasing and experimental studies are increasing. 3. In the fields of research, health problems, health risk factors and health awareness were higher than others. Occupational health nurse's task and job satisfaction were main areas of research until the middle of 1990's. However, after then, not only health problem, risk factor and awareness of health but also health promotion and preventive health behavior are increasing in the research areas. 4. The collaborative researches have gradually increased and the type of author has been varied. The number of researches completed by funds was undertaking only 3 among the total 94. 5. In the research analysis, except for case studies and literature studies, the research subjects have been shifted from the occupational health nurses to the industrial workers, and more diversified. The sample size has been enlarged and the major place of the study is industry. The questionnaire was used in many studies as instrument for data collection and measurement. But, complementary methods of diverse instruments have been increased. The method of data analysis has obviously showed some changes moving from descriptive statistics to inferential and advanced statistics. 6. The ways of nursing intervention have prominently diversified in experimental studies. The contents of case studies were mainly focused on the health management programs and activities in industry. The research concepts and the contents of literature study were also changed progressively in various way. Based on the above findings, conclusions are extended to the following discussion: Since the Korean Academic Society of Occupational Health Nursing was instituted in 1990, the researches of occupational health nursing have shown an acute methodological development in both quantity and quality. However, they were considered still in the lack of research verifying the effects of nursing intervention program. Also, the development of nursing intervention and nursing theory lacked. Therefore, more empirical researches are strongly needed to utilize the field of occupational health nursing in Korea Researchers are also encouraged to exert more efforts to get research funds.

• 대한공업교육학회지
• /
• v.38 no.2
• /
• pp.1-26
• /
• 2013

This study inquired following research questions by a narrative research method : What was the job of an engineer in mechanical design field? How did he fulfill his job-related learning in his workplace? What were the context and the characteristic of the job-related learning in the workplace? And some implications of the job-related learning on engineering education were discussed. We identified that the research participant's career as a mechanical engineer has developed through three stages. At first, he engaged on conceptual design of a semi-conductor test machine through self-initiated learning from basic to whole system of the machine. At second stage, he leaded a design group for the concrete design of a ball type semi-conductor test machine. In this stage he learned the meaning of cooperation and cooperative learning. At third stage, he initiated to found an entrepreneur company that was specified to design a semi-conductor test machine. He became CEO of the company. He learned the R & D policy making through contacts with global company, visiting exhibition in abroad. Eventually his main task as a mechanical engineer was the problem solving in the process of machine design. He had experienced and learned through his works : project management, independent fulfilling of tasks, functional analysis and reverse engineering, conceptualizing and test, cohesive cooperation, dialogue and discussion, mediation of conflict, human relationship, leadership. The implication of the narrative analysis on engineering education is, proposed, to give the students more chances to experience and to learn such activities.

• Journal of Korean Clinical Health Science
• /
• v.2 no.4
• /
• pp.216-222
• /
• 2014

Purpose. The purpose of this study was to investigate career awareness of the students majoring in optometry in Gyeongnam area so that it could be used as a database to educate them on their career. Methods. The graduates of the Department of Optometry in 6 universities of Gyeongnam area were surveyed through a questionnaire. Results. Most of their motive for entering Department of Optometry was for 'finding a job(38%), while at the time of entrance, most of them (55%) thought 'optician' as their job after graduation. Now most of them are the expectant graduate and they still think 'optician' as their job(54%). The biggest reason why they think of this career was 'aptitude(34%),' and most of them wanted their first monthly wage as less than '1.5 million won (46%).' For the desired work time, most of them said 'less than 10 hours a day (73%),' and they have been figured out to want '2 days off a week and monthly paid holiday (35%).' For the questions asking any improvements that are needed for department of Optometry, they (32%) answered 'equipments that are old or in short.' For the question asking if they are willing to choose optical task even if they entered a company that is irrelevant with it, most of them (37%) said they will if the conditions work, and the other 37% said they didn't know. Conclusions. The cooperation among universities and the field and their interest are required so that the students of the Department of Optometry would be able to work with pride as a professional to improve social welfare.

• The Journal of the Korea Contents Association
• /
• v.16 no.1
• /
• pp.190-203
• /
• 2016

Based on the premise that a systematic career process was one of the essential elements of successful task performance both for individuals and the organization in the field of social welfare, this study set out to empirically analyze factors influencing the career commitment of social workers at a multidimensional level and provide practical implications for the directionality of career management on the basis of data with theoretical and statistical accuracy. For those purposes, the study collected individual and organizational characteristics data from 787 social workers at 46 agencies through a structured questionnaire and analyzed influential factors through the multilevel analysis technique by taking organizational effects into account. The analysis results show that explanations by the organization characteristics recorded significant 15% in the total variance of career commitment and that its influential factors included such significant variables as the protean career attitude, desire for growth, human network, and self-efficacy at the individual level and also the qualification compensation system at the organizational level. The study then proposed and discussed integrated practice strategies between individuals and agencies as the measures to promote career success through the activation of individual factors based on the consideration of organizational effects such as the application of an employee assistant program, provision of incentives to professional career development, and shift to a learning organization.

• The Journal of the Korea Contents Association
• /
• v.13 no.11
• /
• pp.441-450
• /
• 2013

With the recent increase in BIM orders in civil engineering, project owners are supplied with BIM-based products. Due to the lack of related guidelines, however, and the vague regulations on the creation and level of drawings as well as on the products list, many owners receive BIM-based products along with the existing 2D products. This can lead to task overlapping by designers or contractors and can cause the owners to have more data to maintain. If the existing 2D-based electronic supply system is changed to a BIM ordering system to reduce such a burden, it is necessary to examine the 2D products that can be extracted from or substituted for the BIM model so as to minimize the overlapping products. Therefore, in this study, BIM modeling of road construction projects whose enforcement plan by the Ministry of Land and Transportation has been completed was conducted, and based on the study results, the possibility of extracting 2D drawings from a total of 3,767 drawing items was determined. The results showed that 2,549 drawing items (67%) could be extracted as 2D drawings from the BIM model, and in particular, drawing items related to general connection work, earthwork, and amenities work could be most effectively substituted. The results of this study can be used as the base data for reducing the number of 2D drawings or substituting them in developing a BIM-based product supply system in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.48-54
• /
• 2020

DMSMS (Diminishing Manufacturing Sources and Material Shortage) is increased by developing the scientific technique and downsizing the military part market. DMSMS affects the increase in total life cycle costs and serviceability. Therefore, advance control for parts is important to reduce the cost, and a database is needed to share information on the DMSMS. A task needs to be performed continuously by setting the major control item to management more efficiently. The purpose of this study was to deduce the major control item for the DMSMS management system. Thus, the pre-control item basis of the DAPA (Defense Acquisition Program Administration) Manual and the SD-22 Manual were first selected, and the results of the survey were analyzed by AHP (Analytic Hierarchy Process) method. Fifteen of the detailed items were stratified into three criteria (Impact, Probability, and cost of the DMSMS), and each weight for the items was calculated using a nine-point scale survey. The AHP survey was executed with 25 specialists in the DMSMS management field, and the score of consistency ratio over 0.1 was excluded. The model explained the results and suggested future directions for development.

• Journal of Korean Society of Forest Science
• /
• v.82 no.3
• /
• pp.292-304
• /
• 1993

This research developed a forest-level harvest scheduling model using linear programming (LP). The formulations of the LP model include timber production schemes with constraints of nondecling yield forest conversion strategies, the minimum timber supply, levels and the maximum cut acrages. The model is able to generate both Model I and Model II types of input matrix in MPS format. In this paper, use of LP in building the framework of the strategic forest planning model was justified by comparing the algorithmic characteristics of LP with those of Gentan probability and binary search approaches through literature reviews. In order to demonstrate the field applicability of the model proposed. (1) the harvest scheduling problem for about 11,000-hectare case study area (Mt. Baekun area in Southern Experimental Forest of Seoul National University) was formulated and soloed and (2) the effects of the change in task regulatory timber production constraints or. optimal harvesting schedules here investigated.

• Economic and Environmental Geology
• /
• v.51 no.3
• /
• pp.279-289
• /
• 2018

With the launch of the new government in 2017, National Planning and Advisory Committee (NPAC) announced the five-year plan for the government administration and the 100 national tasks. The Ministry of Science and ICT (Information & Communication Technology) (MSIT) and other government agencies issued work plans for 2018, including R&D plans. Analyzing the changes in government policy will be a major task of public research and development institutions. This study analyzed the changes of the R&D policy of the new government and the R&D policy direction and strategic plan of the government departments related to the geoscience and mineral resources in 2018. The results of the analysis are as follows: 1) to lead the innovation growth through the 4th industrial revolution, 2) to supply clean energy and to cope with climate change in the environment and energy field, 3) to improve the quality of life through problem solving in the life of the people and disaster prevention. Considering the investment direction of the government, it is necessary to lead the geoscience and mineral resources R&D to solve problems of the society and to grow by the science and technology.