• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.523-525
• /
• 1998

In this paper, a robust control scheme for a class of SISO nonlinear dynamical system is proposed by using output-feedback linearization method. The presented control scheme is based on the VSS control theory concept. In this control scheme, we assume that the nonlinear dynamical system is minimum phase, i.e., the relative degree of the system is r < n and zero dynamics is stable. We also assume that the states of zero dynamics are not accessible. It is shown that the global asymptotically stability is guaranted under the proposed control scheme. The feasibility of the proposed control scheme is verified through a computer simulation.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.936-938
• /
• 1999

In this Paper, the design of a feedback linearization controller using multilayer neural network is proposed. The Proposed feedback linearization control scheme is designed by finding Lie derivatives from an identified neural networks. Lie derivatives are expressed as a combination of weights and neuron outputs. The proposed method is applied to an antenna arm problem and the simulation results show performance comparisons between the ordinary feedback linearization and the Proposed method.

• International Journal of Aeronautical and Space Sciences
• /
• v.6 no.2
• /
• pp.1-16
• /
• 2005

Adaptive control methods are studied for the Satellite to isolate vibration in spite of the nonlinear system dynamics and parameter uncertainties of disturbance. First, a centralized control scheme is developed based on the particle swarm optimization(PSO) algorithm and feedback theory to automatically tune controller gains. A simulation study of a 3 degree-of-freedom device was conducted to evaluate the performance of the proposed control scheme. Next, since a centralized control scheme is hard to construct model dynamics and not goad at performance when controller and systems environment are easily changed, a decentralized control scheme is presented to avoid these defects of the centralized control scheme from the point of view of production and maintenance. It is based on the adaptive control methodologies to find PID controller parameters. Experiment studies were conducted to apply the adaptive control scheme and evaluate the performance of the proposed control scheme with those of the conventional control schemes.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.5
• /
• pp.819-832
• /
• 2017

We propose a new switching control scheme for a ball and beam system by utilizing two linearization methods. First, the Jacobian linearization is applied and state observer is developed afterward. Then, motivated [6], the approximate input-output linearization is carried out, and after that, the Jacobian linearization is applied along with the design of state observer. Since the second approach requires two linearizations, it is called a two-step linearization method. The state observer is needed for the estimation of the velocities of ball and motor movement. Since the Jacobian linearization based controller tends to provide faster response at the initial time, and after that, the two-step linearization based controller tends to provide better response in terms of output overshoot and convergence to the origin, it is natural to give a switching control scheme to provide the best overall control response. The validity of our control scheme is shown in both simulation and experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.81-86
• /
• 1991

The iterative learning operation has been utilized in the temperature Control of a batch reactor. A generic form of feedback-assisted first-order learning control scheme was constructed and then various design and operation modes were derived through convergence and robustness analysis in the frequency domain. The proposed learning control scheme was then implemented on a bench scale batch reactor with the heat of reaction simulated by an electric heater. The results show a great improvement in the performance of control as the number of batch operations progressed.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1483-1486
• /
• 2002

In this paper, a new scheme of iterative loaming control of a robot manipulator is presented. The proposed method uses a fuzzy sliding mode controller(FSMC), which is designed based on the similarity between the fuzzy logic control(FLC) and the sliding mode control(SMC), for the feedback. With this, the proposed method makes possible fDr fast iteration and has advantages that no linear approximation is used for the derivation of the learning law or in the stability proof Full proof of the convergence of the fuzzy sliding base learning scheme Is given.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.34 no.3
• /
• pp.89-96
• /
• 1985

This paper presents a decentralized adaptive scheme to stabilize a class of large-scale discrete-time linear systems subject to system parameter uncertainties. The scheme combines an adaptive nonlinear feedback control for compensating some effects by unknown system parameters and the exact model-based linear feedback control for overriding the unfavorable effects by interconnections. A condition of stability is derived, under which the overall adaptive system is assured to be globally stable. Also, a numerical example is provided to illustrate the feasibility of the scheme.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.828-833
• /
• 2003

Rigid plate elastically supported at the edges is modeled and the performance of the optimal vibration control under sinusoidal excitation is tested. The controller based on the linear quadratic regulator with output feedback is designed to control the multi-degree of freedom vibration. Relative weighting parameters are considered as design constraints to determine the limitation of maximum control force and state parameters. Control force calculated by proportional output feedback of the displacement and velocity is used to suppress the vibration induced by the sinusoidal external force. The active vibration control of vibrating plate by the LQR controller is examined through the numerical simulations that show the effectiveness of optimal control scheme on the three degrees of freedom structure.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.7
• /
• pp.706-717
• /
• 1991

In order to remove the assumption of full state availability which is one of the major difficulties with the practical realization of variable structure control systems,a new switching function with a dynamic structure is proposed. And the control performances of the output feedback variable structure control systems with the dynamic switching function are evaluated through simulation studies. The proposed dynamic switching function is driven by small number of measured output and input variables while conventional static switching function requires full state information. Therefore, the proposition of the dynamic swiching function makes practical implementation of output feedback variable structure control scheme possible for the systems with unmeasurable state variables, high order systems and large scale systems that the conventional variable structure control schemes with static switching function cannot be applied. In the variable structure control systems with the dynamic switching function, desired control performance can be guaranteed by proper choice of design parameters such as poles of switching function dynamic equation and switching control gains even though small number of measured output and input variables are provided as shown in simulation resuls.

• Proceedings of the KAIS Fall Conference
• /
• 2001.11a
• /
• pp.173-176
• /
• 2001

A company needs to maintain its machines always workable in order to keep the manufacturing time minimal. If any troubles un, they should be fixed as soon as possible. But, the complexity of modem machines make the trouble shooting difficult. So, it is important that the monitoring system for automated production system to fix every trobule easily. In this paper new, inverter control system for TG feedback a formula Control was developed. The motor control system with TG feedback controller as an effect of load disturbance, it is very difficult to guarantee the robustness of Control System. The function of the implementation are TG feedback type, and temperature scheme. The Inverter Control System approach is based on master-slave control concept. To show validity of the developed new inverter control system severial experiments are illustrated.