• 한국군사과학기술학회지
• /
• 제10권3호
• /
• pp.129-138
• /
• 2007

Recently, Direction Finding(DF) System is using switching DF algorithm to reduce system-weight by eliminating RF cable as much as possible. Also, Correlation Vector Direction Finding(CVDF) algorithms is being used for Fast Direction finding in tactical environment. In this paper, I will give you burst error elimination algorithms and compare the performance in case we use switching CVDF algorithm. Although antenna array is not working, we will successfully perform direction finding when we use this burst error elimination algorithms. Also, we will be completely capable of DF mission despite of meeting the unwanted situation that the monitoring signal disappear in case we use Switching Direction Finding algorithms. That situation frequently occurs under the Frequency Hopping signal circumstances.

• ETRI Journal
• /
• 제29권5호
• /
• pp.596-606
• /
• 2007

It is well known that an OFDM receiver is vulnerable to synchronization errors. Despite fine estimations used in the initial acquisition, there are still residual synchronization errors. Though these errors are very small, they severely degrade the bit error rate (BER) performance. In this paper, we propose a residual error elimination scheme for the digital OFDM baseband receiver aiming to improve the overall BER performance. Three improvements on existing schemes are made: a pilot-aided recursive algorithm for joint estimation of the residual carrier frequency and sampling time offsets; a delay-based timing error correction technique, which smoothly adjusts the incoming data stream without resampling disturbance; and a decision-directed channel gain update algorithm based on recursive least-squares criterion, which offers faster convergence and smaller error than the least-mean-squares algorithms. Simulation results show that the proposed scheme works well in the multipath channel, and its performance is close to that of an OFDM system with perfect synchronization parameters.

• 한국측량학회지
• /
• 제4권2호
• /
• pp.88-93
• /
• 1986

선형모델의 최소제곱조정에서 관측값에 포함된 과대오차는 상관관계가 있는 다른 잔차들에 영향을 준다. 따라서 표준화잔차를 기초로 하는 Baarda의 방법은 수정되고 변화되어 왔다. 본 연구에서는 다 과대오차를 제거하기 위해 발표된 방법들을 비교분석하고, 상좌표의 과대오차제거에 적용하는데 목적을 두고 있다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.278-281
• /
• 2009

In this paper, we propose a fast partial distortion algorithm using normalized dithering matching scan to get uniform distribution of partial distortion which can reduce only unnecessary computation significantly. Our algorithm is based on normalized dithering order matching scan and calibration of threshold error using LOG value for each sub-block continuously for efficient elimination of unlike candidate blocks while keeping the same prediction quality compared with the full search algorithm. Our algorithm reduces about 60% of computations for block matching error compared with conventional PDE (partial distortion elimination) algorithm without any prediction quality, and our algorithm will be useful to real-time video coding applications using MPEG-4 AVC or MPEG-2.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권9호
• /
• pp.3458-3481
• /
• 2021

Existing methods for blind identification of linear block codes without a candidate set are mainly built on the Gauss elimination process. However, the fault tolerance will fall short when the intercepted bit error rate (BER) is too high. To address this issue, we apply the reverse algebra approach and propose a novel "two-step-screening" algorithm by solving the linear error equations on the binary Galois field, or GF(2). In the first step, a recursive matrix partition is implemented to solve the system linear error equations where the coefficient matrix is constructed by the full codewords which come from the intercepted noisy bitstream. This process is repeated to derive all those possible parity-checks. In the second step, a check matrix constructed by the intercepted codewords is applied to find the correct parity-checks out of all possible parity-checks solutions. This novel "two-step-screening" algorithm can be used in different codes like Hamming codes, BCH codes, LDPC codes, and quasi-cyclic LDPC codes. The simulation results have shown that it can highly improve the fault tolerance ability compared to the existing Gauss elimination process-based algorithms.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.261-263
• /
• 1988

In this study, the several control laws and switching planes are considered to eliminate the steady state error and to obtain the rapid response for variable structure control systems. An elimination algorithm is achieved by combination with each other control law, and the type of control law having the most rapid response is shown through some simulations.

• 전기학회논문지P
• /
• 제64권2호
• /
• pp.67-73
• /
• 2015

Distance relay is widely used for the protection of long transmission line. Most of distance relay used to calculate line impedance by measuring voltage and current using DFT. So if there is a computation error due to the influence of phasor by DC offset component, due to excessive vibration by measuring line impedance, overreach or underreach can be occurs, and then abnormal and non-operation of distance relay can be issue. It is very important to implement the robust distance relaying that is not affected by DC offset component. This paper describes an enhanced distance relaying based on the DC offset elimination filter to minimize the effects of DC offset on a long transmission line. The proposed DC offset elimination filter has not need any prior information. The phase angle delay of the proposed DC offset filter did not occurred and the gain error was not found. The enhanced distance relay uses fault current as well as residual current. The behavior of the proposed distance relaying using off-line simulation has been verified using data about several fault conditions generated by the ATP simulation software.

• 한국측량학회지
• /
• 제9권1호
• /
• pp.47-54
• /
• 1991

본 연구에서는 사진측량에서의 관측값을 대상으로 과대오차 검출을 용이하게 할 수 있도록 잔차들의 상관관계를 고려하고 최신 분산값(updated reference variance)을 채택하여 기각역을 설정함으로써 여러개의 과대오차를 검출할 수 있고 이들 과대오차를 소거한 후 자체검정 번들 조정법에 정오차 보정을 위한 부가매개변수를 도입하여 3차원 위치결정 정확도를 향상시키고자 하였다. 본 연구에서는 근거리 사진측량의 3차원 위치결정에 있어서 관측값에 대해 순차적 data-snooping 법을 적용하여 과대오차를 제거하고 종래의 번들조정법들과 정확도를 비교 분석한 결과, 과대오차를 제거한 이후에 정오차를 보정하는 것이 바람직함을 알 수 있었으며, 관측값에 두개 이상의 과대오차가 포함되면 최소제곱법의 masking효과에 의해 과대오차가 잔차의 상관성이 가장 큰 점의 검정통계량에 영향을 주기 때문에 상관성이 가장 큰 점을 먼저 탐색하고, 제거한 후 실제 과대오차를 제거하여야 함을 알 수 있었다.

• 한국멀티미디어학회논문지
• /
• 제14권8호
• /
• pp.1000-1009
• /
• 2011

영상 보간법은 영상의 크기변환에서 할당되지 못한 화소에 대한 값을 추정하는 기술로써, 보간된 결과 영상에서 나타나는 화질 열화 현상을 최소화하면서도 낮은 계산복잡도를 가지는 것이 필요하다. 본 논문에서는 반복적 오차 제거를 이용한 영상 보간법을 제안한다. 제안하는 방법은 5단계로 구성되며, 각각 손실 정보 계산 단계, 손실 정보 추정 단계 손실 정보 적용 단계 오차 계산 단계 오차 적용 단계이다. 실험을 통해서 기존의 방법보다 평균 3.3dB이상 PSNR(peak signal to noise rate)이 향상된 것을 알 수 있었고, 주관적인 화질도 개선된 것을 확인하였으며 계산복잡도가 최소 83% 이상 감소한 것을 측정하였다. 제안한 영상 보간 방법은 영상 복원 및 확대를 위한 다양한 응용 환경에서 유용하게 사용될 수 있다.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.1105-1118
• /
• 2015

Battery energy storage devices (ESDs) have become more and more commonplace to maintain the stability of islanded power systems. Considering the limitation in inverter capacity and the requirement of flexibility in the ESD, the droop control was implemented in paralleled ESDs for higher capacity and autonomous operation. Under the conventional droop control, state-of-charge (SoC) errors between paralleled ESDs is inevitable in the discharging operation. Thus, some ESDs cease operation earlier than expected. This paper proposes an adaptive accelerating parameter to improve the performance of the SoC error eliminating droop controller under the constraints of a microgrid. The SoC of a battery ESD is employed in the active power droop coefficient, which could eliminate the SoC error during the discharging process. In addition, to expedite the process of SoC error elimination, an adaptive accelerating parameter is dedicated to weaken the adverse effect of the constraints due to the requirement of the system running. Moreover, the stability and feasibility of the proposed control strategy are confirmed by small-signal analysis. The effectiveness of the control scheme is validated by simulation and experiment results.