• 대한치과보철학회지
• /
• 제42권4호
• /
• pp.397-411
• /
• 2004

Purpose: The purpose of this study was to determine the effect of anchorage systems and palatal coverage of denture base on load transfer in maxillary implant-supported overdenture. Material and methods: Maxillary implant -supported overdentures in which 4 implants were placed in the anterior region of edentulous maxilla were fabricated, and stress distribution patterns in implant supporting bone in the case of unilateral vertical loading on maxillary right first molar were compared with each other depending on various types of anchorage system and palatal coverage extent of denture base using three-dimensional photoelastic stress analysis. Two photoelastic overdenture models were fabricated in each anchorage system to compare with the palatal coverage extent of denture base, as a result we got eight models : Hader bar using clips(type 1), cantilevered Hader bar using clips(type 2), Hader bar using clip and ERA attachments(type 3), cantilevered milled-bar using swivel-latchs and frictional pins(type 4). Result: 1. In all experimental models, the highest stress was concentrated on the most distal implant supporting bone on loaded side. 2. In every experimental models with or without palatal coverage of denture base, maximum fringe orders on the distal ipsilateral implant supporting bone in an ascending order is as follows; type 3, type 1, type 4, and type 2. 3. Each implants showed compressive stresses in all experimental models with palatal coverage of denture base, but in the case of those without palatal coverage of denture base, tensile stresses were observed in the distal contralateral implant supporting bone. 4. In all anchorage system without palatal coverage of denture base, higher stresses were concentrated on the most distal implant supporting bone on loaded side. 5. The type of anchorage system affected in load transfer more than palatal coverage extent of the denture base. Conclusion: To the results mentioned above, in the case of patients with unfavorable biomechanical conditions such as not sufficient number of supporting implants, short length of the implant, and poor bone quality, selecting a resilient type attachment or minimizing the distal cantilevered bar is considered to be an appropriate method to prevent overloading on implants by reducing cantilever effect and gaining more support from the distal residual ridge.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.205-208
• /
• 2005

Fabrication of large scaled mirror for the telescope application is the most challenging technology in recent year. Sophisticate technologies and know-how in fabrication and measurement are required to overcome the technological obstacles. KRISS(Korea Research Institute for Standards and Science) is now developing a large scaled mirror fabrication facility and KARI(Korea Aerospace Research Institute) is supporting the development. High precision interferometric test is required during the grinding and polishing of mirror to identify the surface profile precisely. The required fabrication accuracy of the mirror surface profile is $\lambda$/50 ms($\sim$10 nm for visible wave length). Thus the measurement accuracy should be far less than 10 m. To get this requirement, it is necessary to provide vibration free environment for the interferometer system and mirror under test. Thus the vibration responses on the mirror supporting table due to external vibration should be minimized by using a special isolation system. And the responses on the top of the tower, which hold the interferometer during test, should be minimized simultaneously. In this paper, we propose the concept design of vibration suppression system for the KRISS mirror fabrication facility.

• Journal of Computing Science and Engineering
• /
• 제2권4호
• /
• pp.394-411
• /
• 2008

The data in automation and control systems can be achieved not only from different field devices but also from different OPC (OLE for Process Control) servers. However, current OPC clients can only read and decode the simple data from OPC servers. They will have some problems to acquire structured data and exchange the structured data. In addition to the large network control systems, the OPC clients can read, write, and subscribe to thousands of data points from/to OPC servers. Due to that, the most important factor for building a high performance and scalable industrial control system is the ability to transfer the process data between server and client in the most efficient and fastest way. In order to solve these problems, we propose a means to implement the OPC DA (Data Access) server supporting the OPC complex data, so that the OPC DA clients are able to read and decode any type of data from OPC servers. We also propose a method for caching the process data in large industrial control systems to overcome the limitation of performance of the pure OPC DA system. The performance analysis and discussion indicate that the proposed system has an acceptable performance and is feasible in order for applying to real-time industrial systems today.

• 공학교육연구
• /
• 제8권3호
• /
• pp.17-25
• /
• 2005

공학교육 인증제도를 원활하게 수행하기 위해서는 교수를 비롯한 각 구성원의 노력이 필수적이며, 이는 공학교육 인증제도의 성패를 좌우할 만큼 중요한 요소이다. 이의 성공적인 수행은 수반되는 구성원의 업무를 어떻게 효과적으로 최소화할 수 있느냐에 달려있다고 해도 지나치지 않을 것이다. 본 논문에서는 공학교육인증관련업무의 전전산화와 최소화를 목표로 필자 등이 개발하여 창원대학교에서 운용중인 SAVIORS에 대한 내용과 적용사례를 소개하여 동일한 숙제를 안고 있는 기관들과 유익한 정보를 공유하고자 한다. 특히, 학생에 대한 상담 절차, 각 구성원의 설문조사 및 분석 체계, 강의 및 설계 계획서 작성체계, 학습성과 평가 및 성취도 분석, CQI 작성, 졸업생현황 관리체계, 각종 통계처리 둥 공학교육인증의 주요 사항에 대한 총괄관리 및 지원 전산시스템의 구성과 적용사례를 기술하고자 한다.

• 한국항해항만학회지
• /
• 제33권1호
• /
• pp.21-25
• /
• 2009

선박이 부두에 이접안할 경우 쓰러스터나 특수 추진기가 없는 선박은 예선의 도움을 받아 이접안을 하게 된다. 이접안시 예선들은 도선사의 명령에 의하여 선박의 이접안을 도와주게 된다. 이때 본선과 예선의 위치가 2차원 지도에 표시되고 부두와의 상대적인 거리가 나타난다면 이접안에 매우 도움이 될 것으로 생각된다. 본 연구에서는 이러한 예선사용 지윈 시스템에 대해서 개념 설계를 수행하였다. 예선사용 지원 시스템은 본선, 예선 및 부두의 상황을 모니터링하는 예선사용 모니터링 기능과 해양환경을 고려하여 필요한 예선력을 계산하여 나타내주는 예선사용 자동화 기능을 갖고 있다. 이러한 예선사용 지원 시스템은 항만에 설치된 네트워크를 기반으로 설계되었으며, 추후 한국해양연구원의 선박운항 시뮬레이터를 이용하여 검증될 계획이다.

• 시스템엔지니어링학술지
• /
• 제13권2호
• /
• pp.49-56
• /
• 2017

Implementation of Model-based Systems Engineering(MBSE) depends on a model supporting efficient communication among engineers from various domains. And SysML is designed to create models supporting MBSE but unfortunately, SysML itself is not practical enough to be used in real-world engineering projects. SysML is designed to express generic systems and requires specialized knowledge, so a model written in SysML is less capable of supporting communication between a systems engineer and a sub-system engineer. Domain Specific Languages(DSL) can be a great solution to overcome the weakness of the standard SysML. A SysML based DSL means a customized SysML for a specific engineering domain. Unfortunately, current researches on SysML Domain Specific Language(DSL) for the plant engineering industry are still on the early stage. So as the first step, we have developed our own SysML based Piping & Instrumentation Diagram (P&ID) creation environment and P&ID itself of a specific plant system, using a widely used SysML authoring tool called MagicDraw. P&ID is one of the most critical output during the plant design phase, which contains all information required for the plant construction phase. So a SysML based P&ID has a great potential to enhance the communication among plant engineers of various disciplines.

• 한국정밀공학회지
• /
• 제22권1호
• /
• pp.19-25
• /
• 2005

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.1261-1262
• /
• 2005

• 대한조선학회논문집
• /
• 제43권3호
• /
• pp.362-374
• /
• 2006

Currently, all design information of a hull structure is being first defined on 2D drawings not 3D CAD model at the initial ship design stage and then transferred to following design stages through the 2D drawings. This is caused by the past design practice, limitation on time, and lack of hull structural CAD systems supporting the initial design stage. As a result, the following design tasks such as the process planning and scheduling are being manually performed using the 2D drawings. For solving this problem, a data structure supporting the initial design stage is proposed and a prototype system is developed based on the data structure. The applicability of the system is demonstrated by applying it to various examples. The results show that the system can be effectively used for generating the 3D CAD model of the hull structure at the initial design stage.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제1권2호
• /
• pp.81-90
• /
• 2012

공개소프트웨어는 많은 분야에 걸쳐 활용률이 점차 높아지고 있으며, LMS 분야에서도 공개소프트웨어의 활용이 점차 늘고 있다. 단, 공개소프트웨어 LMS를 도입하려면, 기관별 특화 요구사항에 맞추어 연동 과정이 필수적이다. 본 연구에서는 공개소프트웨어 LMS인 무들을 학교에 도입함에 있어 무들과 학사 시스템 간의 사용자 관리와 강좌 관리를 위한 연동 지원 도구를 구현하였고, 무들과 학사 시스템과의 연동 사례를 통해 사용자 및 강좌 정보 연동을 효율적으로 수행하였다.