• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.153-153
• /
• 2009

We investigated the dependence of the memory margin of the Cap-less memory cell on the strain of top silicon channel layer and also compared kink effect of strained Cap-less memory cell with the conventional Cap-less memory cell. For comparison of the characteristic of the memory margin of Cap-less memory cell on the strain channel layer, Cap-less transistors were fabricated on fully depleted strained silicon-on-insulator of 0.73-% tensile strain and conventional silicon-on-insulator substrate. The thickness of channel layer was fabricated as 40 nm to obtain optimal memory margin. We obtained the enhancement of 2.12 times in the memory margin of Cap-less memory cell on strained-silicon-on-insulator substrate, compared with a conventional SOI substrate. In particular, much higher D1 current of Cap-less memory cell was observed, resulted from a higher drain conductance of 2.65 times at the kink region, induced by the 1.7 times higher electron mobility in the strain channel than the conventional Cap-less memory cell at the effective field of 0.3MV/cm. Enhancement of memory margin supports the strained Cap-less memory cell can be promising substrate structures to improve the characteristics of Cap-less memory cell.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.130-134
• /
• 2008

Touch screen phone which is expected to play a big part of the mobile market for the next few years, has many merits but demerits of inaccurate feedback. It offers audio and tactile feedback to strengthen the weak point. This study aims to see if audio feedback and vibration feedback react upon each other under realistic conditions. We had a qualitative research in perception after using touch screen phone feedback. The result showed that with any feedback users were satisfied more than without any feedback and there was diversity in response. We ran the study again to see the performance level and the projective workload between the kind of feedback and interrupting feedback environment Performance rates were faster with audio feedback and according to the projective workload assessment users felt that task was easier and less annoying with audio-vibration feedback. The results suggest that audio feedback could be more effective than vibration feedback. A future study will figure out the relationship between the factors of qualitative-controlled feedback and learning time and the performance, and the main cause to make people prefer one feedback over another in a realistic world.

• Physical Therapy Korea
• /
• v.12 no.2
• /
• pp.44-57
• /
• 2005

The objectives of this study were to examine the relative efficacy of three active exercise programs for work-related, chronic low back pain, and to observe to what extent the programs affected the mechanical stability of the lumbar region. The subjects were 64 employees who were randomly divided into three groups to match the three active exercise programs which were performed 3 times a week for 6 months. All subjects were assessed with the same measurements at a pre-study examination, and then were reassessed at 2 weeks, 3months and 6 months after the study. The pain intensity didn't show any significant difference among the three groups. However, the Oswestry Disability Index showed significant differences among the three groups at 6 months and the lumbar and thoracic exercise groups showed significant decreases compared to the general physiotherapy group (p<.05). Maximal stretching with both hands in the overhead direction showed a significant difference among the three groups at 3 months and 6 months, and the thoracic exercise group at 6 months showed a significant increase in overhead stretching compared to the lumbar exercise and general physiotherapy groups (p<.05). The group that performed maximal stretching with both hands in the overhead direction showed the most significant among the 3 months and 6 months. At 6 months, the thoracic exercise group showed a significant increase in overhead stretching compared to the lumbar exercise and general physiotherapy groups (p<.05). The lumbar region angle of inclination showed significant differences among the three groups at 2 weeks 3 months, and 6 months, with the thoracic exercise group being decreased more significantly at 6 months than the lumbar exercise and general physiotherapy groups (p<.05). Exercise aimed at increasing thoracic mobility has an effect on lumbar stability. Furthermore, it is far more effective for lumbar stabilization than general physiotherapy and deep muscle strengthening lumbar exercise.

• Journal of Food Hygiene and Safety
• /
• v.16 no.4
• /
• pp.342-348
• /
• 2001

Growing evidence indicates that oxidized low density lipoprotein (LDL) may promote atherogenesis. Therefore, inhibition of LDL oxidation may impede this process. The effect of chitin sulfate on the susceptibility of human low density lipoprotein (LDL) to macrophages-induced oxidation was investigated by monitoring a thiobarbituric acid reactive substance (TBARS). Chitin sulfate inhibited LDL oxidation by macrophages in a dose dependent manner, with a 50~100$\mu$M, as assessed by TBAaS assay. Chitin sulfate, at 100 $\mu$M, almost completely inhibited the macrophage-induced increase in electrophoretic mobility of LDL. Also, chitin sulfate almost completely inhibit $O_2$￣ at concentration of 100 $\mu$M. These observations suggest that chitin sulfate might be an effective in prevention of atherosclerosis.

• Journal of Veterinary Clinics
• /
• v.28 no.4
• /
• pp.449-451
• /
• 2011

An 1.28 kg, male, thirteen years of age, red-eared slider (Trachemys scripta elegans) was presented with one month history of anorexia, decreased mobility, and swelling and erythema of forelimbs. Hyperuricemia and tophaceous gout such as osteolysis at the digit, carpal and metacarpal bones with radiopaque densities around the lesion were detected. Allopurinol (20 mg/kg, PO, once a day) and u/d (Hill's diet) were selected for treatment and other antibiotics or anti-inflammatory drugs were not administered. One month after initial presentation, clinical signs and radiographic findings were improved. According to the medical response, the turtle was presumptively diagnosed as articular gout and allopurinol revealed effective response to the articular gout in turtles.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.719-727
• /
• 2001

Recently it was found that the charge carrier transport properties are significantly enhanced due to effective intermolecular $\pi$-orbital overlapping and low disorder of hopping sites caused by self-organization of liquid crystal molecules. In this study, the xerographic properties of a double-layer photoconductor doped with nematic liquid crystal, 4-pentyl-4'-cyanoterphenyl (5CT), as a charge-carrier transport material to enhance the charge-tarrier mobility were investigated. From the results of measured surface voltage properties for the photoconductor doped with various concentrations of liquid crystal, 5CT, the initial voltage was found to increase with the concentration of 5CT and the dark decay decreased with the concentration of 5CT. The highest sensitivity was obtained at a specific concentration, 40wt% 5CT. The fluorescence behavior of the carrier transport layer (CTL) was also investigated. It was found that the charge-carrier transport properties of the organic photoconductor depend on the charge-carrier transport properties of the complex. The TNF : 5CT (40 wt%) and OXD : 5CT (40 wt%)samples showed the highest sensitivity because the greatest charge transport complex was termed between the charge-carrier transport materials in these samples.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.776-785
• /
• 2006

Ship builder's requirement for a higher power output rating has lead to the development of super large two stroke low speed diesel engines. Usually a large-sized bore ranging from 8-14 cylinders, this engine group is capable of delivering power output of more than 100,000 bhp at maximum continuous rating. Other positive aspects of this engine type include higher thermal efficiency, reliability, durability and mobility. This all playa vital role in meeting the propulsion requirement of vessels, specifically for large container ships, of which speed is a primary concern to become more competitive. Consequently, this also resulted in the modification of engine parameters and new component designs to meet the consequential higher mean effective pressure and higher maximum combustion pressure. Even though the fundamental excitation mechanism unchanged, torsional vibration stresses in the propulsion shafting are subsequently perceived to be higher. As such, one important viewpoint in the initial engine design is the resulting vibration characteristic expected to prevail on the propulsion shafting system(PSS). This paper investigated the torsional vibration characteristics of these super large engines. For the two node torsional vibration with a nodal point on the crankshaft, a tuning damper is necessary to reduce the torsional stresses on the crankshaft. Hence, the tuning torsional vibration damper design and compatibility to the shafting system was similarly reviewed and analyzed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.6
• /
• pp.648-654
• /
• 2003

Diamond MIS(Metal-Insulator-Semiconductor) diodes and MISFETs(Metal-Insulator-Semiconductor Field Effect Transistors) were fabricated by employing various fluorides as gate insulator, and their electrical properties were closely investigated by means of C-V measurements. The A1/BaF$_2$/diamond MIS structure exhibited outstanding electrical properties. The MIS diode showed a very low surface state density of ∼10$\^$10//$\textrm{cm}^2$ eV near the valence band edge, and the observed effective mobility(${\mu}$$\_$eff/) of the MISFET was 400 $\textrm{cm}^2$/Vs, which is the highest value obtained until now in the diamond FET. From the chemiphysical point of view, the above result might be explained by the reduction of adsorbed-oxygen on the diamond surface via strong chemical reaction by the constituent Ba atom in the insulator during the film deposition(Oxygen-Gettering Effect).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.39-40
• /
• 2008

We have examined post-annealing and passivation for the transparent bottom gate IGZO TFT having an inverse co-planar structure. The oxygen-vacuum two step annealing enhanced the field effect mobility up to 18 $cm^2$/Vsandthesub-threshold swing down to 0.2V/dec. However, the hysterysis and the bias stability problems could not be solved just by post-annealing. Thus, we have passivated the bottom gate IGZO TFTs with organic and inorganic materials. $Ga_2O_3$, $Al_2O_3$, $SiO_2$ and some polymer materials were effective materials for passivations. The hysterysis and the stability of the TFTs were remarkably improved by the passivations. We have manufactured the AMOLED panel with the transparent bottom gate IGZO TFT array successfully.

• The KIPS Transactions:PartC
• /
• v.17C no.6
• /
• pp.491-498
• /
• 2010

Wi-Fi based vehicle-to-infrastructure (V2I) communication is an emerging solution to improve the safety, traffic efficiency, and comfort of passengers. However, due to the high mobility of vehicles and the limited coverage of Wi-Fi APs, the V2I system may suffer from frequent handoffs although roadside APs can support cost effective Internet connectivity. Such problem of V2I systems can be overcome with Mobile AP (MAP) platform. The MAPs yield longer service duration by moving along with vehicles, yet they provide a lower link capacities than the roadside APs. In this paper, we propose a new association control mechanism that effectively determines whether the vehicle will select a fixed roadside-AP or a nearby MAP in mobile vehicular network environments. We consider both the achievable link bandwidth and available connection duration as a selection criterion and provide their run-time estimation method. Extensive simulation using real traces show significant performance improvements.