• 한국측량학회지
• /
• 제33권6호
• /
• pp.517-526
• /
• 2015

Among the various image fusion or pan-sharpening methods, those wavelet-based methods provide superior radiometric quality. However, the fusion processing is not only simple but also flexible, since many low- and high-frequency sub-bands are often produced in the wavelet domain. To address this issue, a novel DT-CWT (Dual-Tree Complex Wavelet Transform) proportional to the fusion method by a WZP (Wavelet Zero-Padding) is proposed. The proposed method produces a single high-frequency image in the spatial domain that is injected into the LRM (Low-Resolution Multispectral) image. Thus, a wavelet domain fusion can be simplified to spatial domain fusion. In addition, in the proposed DT-CWTP (DT-CWT Proportional) fusion method, it is unnecessary to decompose the LRM image by adopting WZP. The comparison indicates that the proposed fusion method is nearly five times faster than the DT-CWT with SW (Substitute-Wavelet) fusion method, meanwhile simultaneously maintaining the radiometric quality. The conducted experiments with WorldView-2 satellite images demonstrated promising results with the computation efficiency and fused image quality.

• 디지털산업정보학회논문지
• /
• 제8권2호
• /
• pp.131-143
• /
• 2012

This paper introduces the double-density discrete wavelet transform using 3 direction separable processing method, which is a discrete wavelet transform that combines the double-density discrete wavelet transform and quincunx sampling method, each of which has its own characteristics and advantages. The double-density discrete wavelet transform is nearly shift-invariant. But there is room for improvement because not all of the wavelets are directional. That is, although the double-density DWT utilizes more wavelets, some lack a dominant spatial orientation, which prevents them from being able to isolate those directions. The dual-tree discrete wavelet transform has a more computationally efficient approach to shift invariance. Also, the dual-tree discrete wavelet transform gives much better directional selectivity when filtering multidimensional signals. But this transformation has more cost complexity Because it needs eight digital filters. Therefor, we need to hybrid transform which has the more directional selection and the lower cost complexity. A solution to this problem is a the double-density discrete wavelet transform using 3 direction separable processing method. The proposed wavelet transformation services good performance in image and video processing fields.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권1호
• /
• pp.452-472
• /
• 2019

Most existing wavelet-based multiplicative watermarking methods are affected by geometric attacks to a certain extent. A serious limitation of wavelet-based multiplicative watermarking is its sensitivity to rotation, scaling, and translation. In this study, we propose an image watermarking method by using dual-tree complex wavelet transform with a multi-objective optimization approach. We embed the watermark information into an image region with a high entropy value via a multiplicative strategy. The major contribution of this work is that the trade-off between imperceptibility and robustness is simply solved by using the multi-objective optimization approach, which applies the watermark error probability and an image quality metric to establish a multi-objective optimization function. In this manner, the optimal embedding factor obtained by solving the multi-objective function effectively controls watermark strength. For watermark decoding, we adopt a maximum likelihood decision criterion. Finally, we evaluate the performance of the proposed method by conducting simulations on benchmark test images. Experiment results demonstrate the imperceptibility of the proposed method and its robustness against various attacks, including additive white Gaussian noise, JPEG compression, scaling, rotation, and combined attacks.

• 로봇학회논문지
• /
• 제19권3호
• /
• pp.236-243
• /
• 2024

This paper introduces a dual manipulator system designed to automate the packaging process of industrial coils, which exhibit higher variability than other structured industrial fields due to diverse commercial requirements. The conventional solution involves the direct-teaching method, where an operator instructs the robot on a target configuration. However, this method has distinct limitations, such as low flexibility in dealing with varied sizes and safety concerns for the operators handling large products. In this sense, this paper proposes a two-step approach for coil packaging: motion planning and assembly execution. The motion planning includes a Rapidly-exploring Random Tree algorithm and a smoothing method, allowing the robot to reach the target configuration. In the assembly execution, the packaging is considered a peg-in-hole assembly. Unlike typical peg-in-hole assembly handling two workpieces, the packaging includes three workpieces (e.g., coil, inner ring, side plate). To address this assembly, the paper suggests a suitable strategy for dual manipulation. Finally, the validity of the proposed system is demonstrated through experiments with three different sizes of coils, replicating real-world packaging situations.

• 대한조선학회논문집
• /
• 제51권3호
• /
• pp.212-219
• /
• 2014

As subsea production has been revived up, the demand of subsea equipment has also been increased. Among the equipment, subsea tree plays a major role in safety. The tubing hanger is one of the most important components in subsea tree. In this study structural reliability analysis on dual bore tubing hanger of subsea tree is performed. The target reliability which is introduced in ISO regulation is used for judging whether tubing hanger is safe or not. The considered loads are working pressure, working temperature and suspended tubing weight. Thermal-stress analysis on tubing hanger is performed and kriging model is created based on the results of FEM analysis. According to von Mises criterion, limit state equation can be estimated. Reliability analysis is performed by using level 2 method and the result is verified by that of Monte Carlo Simulation. For finding most probable failure point, enhanced HL-RF method is adopted. Because the reliability of model doesn't reach target reliability, an improvement measure should be considered. Thus, it is suggested to change the material of tubing hanger main body to AISI 4140.

• 한국인터넷방송통신학회논문지
• /
• 제19권1호
• /
• pp.69-75
• /
• 2019

과표본화 이산 웨이브렛 변환의 가장 대표적으로 응용되는 분야는 디지털 영상에 존재하는 잡음을 제거하는 기술이다. 이중 밀도 이산 웨이브렛 변환을 이중 트리 이산 웨이브렛 변환과 비교하면, 거의 유사한 특징을 가진다. 본 논문에서는 잡음이 포함된 디지털 영상에 여러 이산 웨이브렛 변환들을 수행하고 생성된 부대역에 임계값 처리 기법을 적용하여 잡음을 제거한 다음 복원한 영상의 성능을 평가하는 실험을 수행하였다. 적당한 임계값을 설정하여 효과적인 잡음제거가 가능하다. 본 논문에서는 여러 방법의 실험 결과에서 제안하는 3방향 분리처리 2차원 이중 밀도 이산 웨이브렛 변환 방법이 우수하다는 것을 확인할 수 있었다.

• 대한전자공학회논문지SP
• /
• 제43권5호
• /
• pp.52-61
• /
• 2006

영상 및 신호 처리 분야에 일반적으로 사용되는 직교 웨이블릿 변환은 천이에 대한 민감성과 방향성에 대한 선택도가 떨어지기 때문에 성능에 한계를 가지고 있다. 이러한 단점을 극복하기 위해 복소수 웨이블릿 변환이 사용되고 있다. 본 논문에서는 이중 트리 복소수 웨이블릿과 베르누이-가우스 사전 확률분포를 이용한 효과적인 영상 잡음 제거 방법을 제안하고자 한다. 베르누이-가우스 모델에 대한 파라미터를 추정하기 위해 본 논문에서는 두 가지의 간단하고 반복적이지 않은 방법을 제안한다. 베르누이 랜덤 변수로 표현되는 혼합 파라미터를 추정하기 위해서는 가설-검증 기법을 사용한다. 추정된 혼합 파라미터를 이용하여 신호의 분산은 MGML(maximum generalized marginal likelihood) 추정기를 통하여 추정된다. 복소수 웨이블릿 변환을 사용하여 제안 방법과 알려진 잡음 제거 기법과 비교 실험을 수행하였다. 실험결과를 통해 제안 방법이 적은 계산량으로 고주파 성분이 많은 영상에 대하여 우수한 잡음 제거 결과를 나타냄을 알 수 있다.

• Journal of Communications and Networks
• /
• 제11권6호
• /
• pp.544-555
• /
• 2009

This work continues a trend of developments aimed at exploiting the physical layer of the open systems interconnection (OSI) model to enhance wireless network security. The goal is to augment activity occurring across other OSI layers and provide improved safeguards against unauthorized access. Relative to intrusion detection and anti-spoofing, this paper provides details for a proof-of-concept investigation involving "air monitor" applications where physical equipment constraints are not overly restrictive. In this case, RF fingerprinting is emerging as a viable security measure for providing device-specific identification (manufacturer, model, and/or serial number). RF fingerprint features can be extracted from various regions of collected bursts, the detection of which has been extensively researched. Given reliable burst detection, the near-term challenge is to find robust fingerprint features to improve device distinguishability. This is addressed here using wavelet domain (WD) RF fingerprinting based on dual-tree complex wavelet transform (DT-$\mathbb{C}WT$) features extracted from the non-transient preamble response of OFDM-based 802.11a signals. Intra-manufacturer classification performance is evaluated using four like-model Cisco devices with dissimilar serial numbers. WD fingerprinting effectiveness is demonstrated using Fisher-based multiple discriminant analysis (MDA) with maximum likelihood (ML) classification. The effects of varying channel SNR, burst detection error and dissimilar SNRs for MDA/ML training and classification are considered. Relative to time domain (TD) RF fingerprinting, WD fingerprinting with DT-$\mathbb{C}WT$ features emerged as the superior alternative for all scenarios at SNRs below 20 dB while achieving performance gains of up to 8 dB at 80% classification accuracy.

• 한국인터넷방송통신학회논문지
• /
• 제9권4호
• /
• pp.59-68
• /
• 2009

본 논문은 최근 소개된 curvelet 변환 구성을 사용하여 하잇브리드 다초점 이미지 융합 기법을 다룬다. 하잇브리화는 MS 융합 규칙을 새로운 "복제" 방법과 결합시킴으로써 얻어진다. 제안된 기법은 MS 규칙을 사용하여 각 분해 레벨 이미지의 스펙트럼내에 m개의 가장 두드러진 항들만을 융합시킨다. 이 기법은 이미지의 어떠한 스케일과 방향, 이동에서 변환 집합의 MSC에 충실하여 m-항 융합으로 합성이 이루어진다. 제안한 방법을 평가하기 위하여 Xydeas 와 Petrovic이 제안한 경계선에 민감한 객관적 품질 척도를 적용하였다. 실험 결과는 제안한 기법이 잉여, 쉬프트-불변 Dual-Tree 복소수 웨이블릿 변환에 대한 대안으로서의 가능성을 보여주었다. 특히, 50%의 m-항 융합은 어떤 시각적인 품질 저하를 갖지 않는 결과를 주는 것이 확인되었다.

• Mycobiology
• /
• 제48권6호
• /
• pp.484-494
• /
• 2020

Oak wilt disease caused by Raffaelea quercus-mongolicae has emerged obviously in Korea. We selected antifungal isolates against R. quercus-mongolicae among 368 endophytic fungal isolates from different parts of oak and pine trees. The experiment was conducted in the primary and secondary screenings by dual culture test. The antifungal activity of the selected isolates was assessed in culture filtrate test based on the inhibition rates in mycelial growth, sporulation, and spore germination of oak wilt fungus. Five isolates, E089, E199, E282, E409 and E415, showed strong antifungal activity in culture filtrate test, and their antifungal activity decreased on the culture media supplemented with heated culture filtrate. Higher mycelial growth inhibitions on the unheated media were recorded in E409 (Colletotrichum acutatum), E089 (Daldinia childiae), E415 (Alternaria alternata) and E199 (Daldinia childiae) with the inhibition rates of 79.0%, 70.1%, 68.9% and 64.5%, respectively. These isolates also had the higher sporulation inhibitions on unheated media with the rates of 96.8%, 84.2%, 82.8% and 80.5%, respectively. The spore germination of the oak wilt fungus was completely inhibited by E282 (Nectria balsamea) on both unheated and heated media. These results showed that a higher number of potent antifungal isolates against oak wilt fungus was isolated from the petiole compared to the other parts. This study could contribute to the development of biological control approaches for the management of oak wilt disease caused by R. quercus-mongolicae.