• 한국전자파학회논문지
• /
• 제21권11호
• /
• pp.1235-1239
• /
• 2010

본 논문에서는 혼합기의 IF 대역폭을 향상시키는 방법을 제안하며, 이를 적용하여 설계 제작된 0.13-${\mu}m$ RFCMOS 공정 기반 24 GHz 하향 변환 혼합기의 결과를 보인다. 측정 결과, 본 혼합기는 24 GHz의 LO 주파수에 대해 DC부터 5.25 GHz까지의 IF 주파수에서 $2.7{\pm}1.5$ dB의 변환 이득을 보이며, P-1dB와 LO-RF isolation은 각각 -8.7 dBm과 21 dB로 나타났다. 본 혼합기는 1.3 V의 전원으로부터 10.6 mA의 DC 전류를 소모한다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제2권2호
• /
• pp.147-155
• /
• 2002

This paper describes RF front-end transceiver chipset for the dual-mode operation of PCS-Korea and IMT-2000. The transceiver chipset has been implemented in a $0.25\mutextrm{m}$ single-poly five-metal CMOS technology. The receiver IC consists of a LNA and a down-mixer, and the transmitter IC integrates an up-mixer. Measurements show that the transceiver chipset covers the wide RF range from 1.8GHz for PCS-Korea to 2.1GHz for IMT-2000. The LNA has 2.8~3.1dB NF, 14~13dB gain and 5~4dBm IIP3. The down mixer has 15.5~16.0dB NF, 15~13dB power conversion gain and 2~0dBm IIP3. The up mixer has 0~2dB power conversion gain and 6~3dBm OIP3. With a single 3.0V power supply, the LNA, down-mixer, and up-mixer consume 6mA, 30mA, and 25mA, respectively.

• 대한전자공학회논문지TC
• /
• 제43권12호
• /
• pp.16-23
• /
• 2006

본 논문은 msec.이하의 짧은 펄스형 신호를 탐지하기 위해 RF 하향변환기에서 직접 변환 방식을 수행하고, 방위 추정에 CVDF (Correlation Vector Direction Finding) 기법을 사용하는 고속 방향탐지기의 개발에 관한 것이다. 선정된 5-채널 등간격 원형 배열구조에서 방향탐지기의 구성 및 특징을 간단히 기술하고 고속 신호수신을 위해 직접 변환을 아날로그 I/Q 복조기에 적용하여 동조시간을 제거하는 기술을 설명한다. 또한 상기 모델에 대한 CRLB(Cramer-Rao Lower Bound)를 유도하고, 2종의 상관형 백터 방향탐지 기법인 LSE 기반 및 상관계수형 알고리즘의 원리를 기술하고 SNR, 샘플수, 이격거리비 변화에 따른 성능을 비교하여 그 특징을 살펴본다. 직접 변환 기법을 사용한 RF 하향변환기 프로토타입을 제작하고, 2종의 상관형 백터 방향탐지 기법을 적용하여 그 성능을 분석하였다 분석 결과, 모호성 발생에 대한 내성은 상관계수형 알고리즘이 양호한 반면, 나머지 조건에서 LSE 기반 알고리즘이 우수한 것으로 조사되었고, 이 결과는 시뮬레이션 결과와 일치하는 것을 확인하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 동계학술발표회 논문집
• /
• pp.197-198
• /
• 2009

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 하계학술발표회
• /
• pp.194-195
• /
• 2001

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권3호
• /
• pp.239-245
• /
• 2017

As a new technical approach, wave energy converter by using vertical motion of water in the multiple water chambers were developed to realize actual wave power generation as eco-environmental renewable energy. And practical use of wave energy converter was actually to require the following conditions: (1) setting up of the relevant device and its application to wave power generation in case that severe wave loading is avoided; (2) workability in installation and maintenance operations; (3) high energy conversion potential; and (4) low cost. In this system, neither the wall(s) of the chambers nor the energy conversion device(s) are exposed to the impulsive load due to water wave. Also since this system is profitable when set along the jetty or along a long floating body, installation and maintenance are done without difficulty and the cost is reduced. In this paper, we describe the system which consists of a float, a shaft connected with another shaft, a rack and pinion arrangement, a ratchet mechanism, and rotary type generator(s). Then, we present the dynamics model for evaluating the output electric power, and the results of numerical calculation including the effect of the phase shift of up/down motion of the water in the array of water chambers aligned along the direction of wave propagation.

• Journal of electromagnetic engineering and science
• /
• 제8권3호
• /
• pp.114-118
• /
• 2008

Direct-conversion RF front-end for 5-GHz WLAN is implemented in $0.18-{\mu}m$ CMOS technology. The front-end consists of a low noise amplifier, and low flicker noise down-conversion mixers. For the mixer, an inductor is included to resonate out parasitic tail capacitances in the transconductance stage at the operating frequency, thereby improves the flicker noise performance of the mixer, and the overall noise performance of the front-end. The receiver RF front-end has 6.5 dB noise figure, - 13 dBm input IP3, and voltage conversion gain of 20 dB with the power consumption of 30 mW.

• 한국전기전자재료학회논문지
• /
• 제21권4호
• /
• pp.311-320
• /
• 2008

In this paper, a 2.4 GHz low-voltage CMOS double-balanced down-conversion mixer using neutralization technique has been proposed and verified by circuit simulations and measurements. The grounded source structure was used for low-voltage operation. The neutralization technique was used to improve a conversion gain. The proposed mixer is fabricated in $0.25{\mu}m$ CMOS process for a 2.4 GHz wireless receiver. The mixer consumes 1.94 mW and gives conversion gain of 5.66 dB, input IP3 of 0.7 dBm and P1dB of -11.2 dBm at 1.5 V power supply. Measured results for the designed mixer show improved conversion gain of 2.86 dB over conventional mixer of grounded source structure.

• 한국안전학회지
• /
• 제20권3호
• /
• pp.47-52
• /
• 2005

Recently, power conversion equipment increased rapidly makes a lot of harmonics. Thus, it is growing that wrong operation and break down of sensitive devices. There are two kinds of causes of harmonics. One of them is lots of power conversion equipment as modem controller, inverter, converter and SWS(Switching Mode Power Supply). Another is nonlinear operating machines as transformer and motor. The more nonlinear loads like them grow, the more serious problems as harmonic current to source and low power factor because of increasing reactive power grow. It is installed for reactor and L-C Filter to decrease harmonic in general. This paper analysis and compares two of characteristics and harmonic from reactor and L-C Filter with operation of induction motor and power conversion equipment. In the result, L-C Filter more improves unbalance rate and THD than reactor.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2002년도 추계총회 및 연구발표회 초록집
• /
• pp.109.2-109
• /
• 2002