• Steel and Composite Structures
• /
• 제37권4호
• /
• pp.431-446
• /
• 2020

This paper presents the flexural performance of double skin composite beams (DSCBs) at different Arctic low temperatures. 12 DSCBs were prepared and tested under two-point loading at different Arctic low temperatures of 20, -30, -50, and -70℃. The studied parameters include low-temperature level (T), steel-faceplate thickness (t), shear span ratio (λ), and spacing of headed studs (S). The experimental investigations under two-point loading tests showed that flexural failure occurred to all DSCBs, even including the specimen designed with the small λ ratio of 2.9. The ultimate strength behaviours of DSCBs were improved due to the improved mechanical properties of constructional materials and the confinement on shear connectors. The DSCB subjected to two-point loading and low temperatures exhibits a five-stage working mechanism. The stiffness and strength indexes of DSCBs increase linearly with temperature and t value increasing, while decreasing as shear span ratio boosts. In the contrast, the change of S value from 150 to 200 mm has little effect on the ultimate strength behavior of DSCB.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.91-93
• /
• 2009

In the recent years, electrical Motors have been developed for a car Blower. Their requirement are high efficiency, low cogging torque and long life. In this paper, the Double Cylinder Motor for a Car Blower was designed which is high efficiency, low noise and vibration because of slotless and double cylinder structure.

• 한국전자통신학회논문지
• /
• 제8권6호
• /
• pp.831-837
• /
• 2013

MEMS 가속도계는 운동측정을 위하여 가속도신호를 해석하는 저비용의 방안이다. 이론적으로 변위는 가속도신호를 두 번 적분함으로서 계산될 수 있으나 실제적으로는 실제 존재하는 여러 가지 원인에 의해서 이 방법으로는 계산 될 수가 없다. 본 실험은 실제적인 가속도신호를 획득하여 저주파 운동해석을 위하여 처리하는 과정에 대하여 보여준다.

• ETRI Journal
• /
• 제20권1호
• /
• pp.37-45
• /
• 1998

Reduced surface field lateral double-diffused MOS transistor for the driving circuits of plasma display panel and field emission display in the 120V region have been integrated for the first time into a low-voltage $1.2{\mu}m$ analog CMOS process using p-type bulk silicon. This method of integration provides an excellent way of achieving both high power and low voltage functions on the same chip; it reduces the number of mask layers double-diffused MOS transistor with a drift length of $6.0{\mu}m$ and a breakdown voltage greater than 150V was self-isolated to the low voltage CMOS ICs. The measured specific on-resistance of the lateral double-diffused MOS in $4.8m{\Omega}{\cdot}cm^2$ at a gate voltage of 5V.

• 전기학회논문지
• /
• 제67권3호
• /
• pp.440-447
• /
• 2018

Double parking is very common in a parking lot where there is not sufficient parking space. When we double-park a car, we leave transmission gear in neutral position and release the emergency brake so that the double-parked car can be moved just by pushing it. However, moving a double-parked car by pushing is very hard and dangerous especially for the old and the weak. So, we propose an omni-directional mobile robot for moving a double-parked car easily and safely. The developed omni-directional mobile robot moves a double-parked car by rotating a wheel of a double-parked car. It has two specially designed rollers to rotate a wheel of a double-parked car and is designed so that the height of the robot is very low to be able to enter beneath a double-parked car. It can move a double-parked car safely by detecting obstacles in the way with five ultrasonic sensors. We verified by several experiments that the developed omni-directional mobile robot can be used to move a double-parked car easily and safely.

• 대한전자공학회논문지SD
• /
• 제48권3호
• /
• pp.18-24
• /
• 2011

본 논문에서는 double boss 구조의 저압용 압력 센서의 다이아프램 브리지 모서리에 홈을 형성함으로서 압력센서의 내압특성을 향상시킬 수 있음을 확인하였다. 저압용 실리콘 압력센서에서는 일반적으로 boss구조가 널리 사용되고 있으나 칩에서의 제한된 다이아프램의 사이즈와 두께로 인하여 좋은 감도를 얻을 수는 없다. 특히, double boss구조는 다이아프램의 브리지 모서리 응력이 크게 작용함에 따라서 크랙이 생겨 다이아프램의 파괴가 진행되어 센서의 감도는 우수하지만 동작영역의 범위가 줄어들어 신뢰성에 문제가 있다는 단점을 가진다. 기존 double boss구조 압력센서 다이아프램 브리지에 모서리 홈의 길이를 $0.5{\sim}10{\mu}m$로 변화시키며 ANSYS 시뮬레이션을 시행하여 다이아프램 브리지 모서리와 브리지의 가장자리 그리고 압저항 소자가 위치하는 곳의 최대응력을 확인하였다. 그 결과 브리지 모서리의 길이가 6${\mu}m$이상인 경우, 브리지 모서리에서 발생하는 응력은 압저항 소자에 작용하는 응력보다 적다.

• 한국지진공학회논문집
• /
• 제7권5호
• /
• pp.11-17
• /
• 2003

일반적으로 토목구조물에서 계측된 가속도 신호의 대부분은 적분이 매우 힘들다. 그 이유는 토목구조에서 계측된 가속도 신호는 일반적으로 비정상신호이며 또한 비가우시안 노이즈와 저주파 노이즈를 포함하고 있어, 저주파 성분이 증폭되는 적분과정에서 수치적 불안정성이 발생할 수 있기 때문이다. 따라서, 본 논문에서는 비정상 신호처리에 탁월한 웨이블릿 변환의 개념을 비가우시안 노이즈와 저주파 노이즈에 대해 확장한 수정된 웨이블릿 변환을 이용한 가속도 기록의 이중 적분방법을 제시하였다. 또한, 예제해석을 통해 제시된 방법이 비정상 신호의 노이즈 및 비가우시안 노이즈와 저주파 노이즈를 제거에 우수한 성능을 보이고 있음을 보였다.

• 한국표면공학회지
• /
• 제45권3호
• /
• pp.117-122
• /
• 2012

ZTO/GZO double layered films were prepared on unheated non-alkali glass substrates. ZTO films were deposited by RF/DC hybrid magnetron co-sputtering using ZnO (RF) target and $SnO_2$ (DC) targets, and then GZO films were deposited by DC magnetron sputtering using an GZO ($Ga_2O_3$:5.57 wt%) target. These films were post-annealed at temperature of 200, $300^{\circ}C$ in air and vacuum ambient for 30 min. In the case of post-annealing in air, ZTO/GZO double layer showed relatively low resistivity change, compared to GZO single layer. Furthermore, ZTO/GZO double layer revealed low WVTR, compared to GZO single layer. Therefore, it can be confirmed that ZTO film doing a role with barrier for water or oxygen diffusion.

• 대한기계학회논문집A
• /
• 제21권2호
• /
• pp.199-208
• /
• 1997

A local strain approach was applied to an external single and double grooved C-shaped specimen in order to evaluate and predict the fatigue crack initiation life by using low cycle fatigue properties. The low cycle fatigue properties were determined from the strain-controlled fatigue tests using smooth cylindrical axial specimens. Fatigue crack initiation life was evaluated by a life prediction software, FALIPS, based on the local strain approach. The fatigue life was significantly influenced by the mean stress, and SWT parameter represented the fatigue life effectively. The predicted fatigue crack initiation life was then compared to the experimental fatigue life evaluated from the C-shaped fatigue test specimens. A good correlation was found between the experimental and predicted fatigue lives within factors of 2 and 4 for the single and double grooved C-shaped specimens respectively. Also, experimental fatigue life of the double grooved specimen was 10-12 times longer than that of the single grooved specimen.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 추계학술대회
• /
• pp.199-200
• /
• 2011

Uninterruptible Power Supply(UPS) is largely divided into passive-standby, line-interactive and double-conversion methods. This paper proposes the double-conversion UPS for low cost and high performance. The proposed UPS are composed of PFC, inverter, battery charger and discharger. Finally, the validity of proposed UPS was verified by experiments.