• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.229-232
• /
• 2007

In hot strip rolling, the work roll profile is one of the main factors in predicting and correcting the strip profile. Various studies concerning the wear profile and the thermal crown of work roll have been performed, and the results of these studies have shown that the work roll profile must be predicted accurately so as to efficiently control the strip qualities such as thickness, crown, flatness, and camber. Therefore, a precise prediction model of roll profile is called for in a perfect shape control system. In this paper, a genetic algorithm was applied to improve on the roll profile prediction model in hot strip rolling. In this approach, the optimal design problem is formulated on the basis of a numerical model so as to cover the diverse design variables and objective functions. A genetic algorithm was adopted for conducting design iteration for optimization to determine the coefficient of the numerical model for minimization of errors in the result of the calculated value and the measured data. A comparative analysis showed a satisfactory conformity between them..

• Journal of the Korean Institute of Rural Architecture
• /
• v.8 no.1
• /
• pp.17-24
• /
• 2006

The purpose of this study is to provide the systematic report and analysis about Apartment VE application in Design Phase. In this study, the method of VE application is classified into foure groups-changing materials, changing a method of construction, acceptance of new technology, and use of new device. The facts found in this study can be summarized as follows. Application rate of VE is highest in building circumference parts. The main reason would be that there are many applicable factors according to locations, types of work, etc. Parking lots also show similar results with the same reason. It means there are a lot of possibility to adapt value engineering in these steps during the work. So far application of value engineering has been so limited that just small changes of process or method have been tried. One reason is the lack of challenging and the other is some characteristics of construction work which is very difficult to fix after completion. In the future, it would be more efficient to apply new technology and new device in construction work. Though these attempts have been ignored in Korea so far, there are still lots of possibilities to be developed in value engineering.

• The Research Journal of the Costume Culture
• /
• v.25 no.4
• /
• pp.488-498
• /
• 2017

This research focuses on the condition of the coveralls that automobile maintenance workers wear. The objective of this survey is to conduct a thorough analysis on the quality of the coveralls and put forth suggestions for improving their quality. The research data were collected through interviews and the results are as follows. The participants in this research engage in a variety of types of maintenance work including oil changes and overall system checks and they usually wear extra-large-sized coveralls. The coveralls are generally worn during the winter for warmth and the company handles all purchasing and maintenance of the work clothes. Participants mentioned that certain parts of the clothes where they bend and stretch are cumbersome and areas around the knees and arms become easily tainted. They have also reported that although the coveralls are necessary, they are for the most part dissatisfied when it comes to the materials, design, and color. The participants have suggested that new coveralls would help to increase their work efficiency. As a result, it is concluded that the coveralls require much more development to meet the workers' needs and improvements need to be made on the functionality, aesthetics, and symbolic aspects of the design.

• Journal of the Korean Society of Costume
• /
• v.62 no.7
• /
• pp.54-66
• /
• 2012

This research analyzes the late Joseon's variously developed characteristics of women's underwear and its formative elements, and ultimately aims to apply such characteristics to designing modern outfits. The main purpose of the presented work is to give guidelines on utilizing the fashion legacy in a various way, and inheriting the traditional concept of beauty by developing it into modern fashion designs. The designing and producing of the work is based on the analysis of previous researches, genre paintings, and traditional costumes in museums. Based on this research, the application of traditional underwear design to today's outfits involves the following points. First, the presented work features the formative outlines of traditional underwear as an inspiration for outer garments. Secondly, various traditional textiles are used such as ramie fabrics, damask silk, silk fabrics, fur, etc. for four seasons and they are turned to practical use for modern outfits. Third, colors of choice are white and low saturation colors to create an elegant and serene atmosphere. Finally, traditional sewing techniques are specifically applied to modern fashion designs. Included are: Nubim technique, Gob-sol technique, and the patching method. This work pursues the design of practical use by tying up clothes with straps and knots to prevent them from falling off.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.2
• /
• pp.169-182
• /
• 2012

In the past, a strategic management of work demands has been increasingly challenged to design-build (DB) firms. Such a management is capable of providing sufficient profitable impact of a project on them. Total project profit is mainly related to actual resources, work completion time, amount of rework, and costs. The degree of recycling work packages in the DB project delivery system is used as a measure of the quality of the performed work. However, there are few models available to evaluate the impact of a demand management strategy on the DB firms and to predict its behavior. We propose a decision-making support model as an aid for assessing the amount of rework and for predicting project profit resulting in a convincible demand management strategy. This model is constructed by using a dynamic feedback approach that can analyze the problems arising in complex managerial systems. For the purpose of illustration, widely acceptable strategies were applied into the model to explore their impacts on the DB firms. The results indicate that the model is helpful for the managers in selecting the most appropriate demand management strategy for successfully achieving their objectives.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.1
• /
• pp.63-72
• /
• 2010

In this study, an earth work design program which will improve the efficiency of earth work and enable to carry out the design using 3D Geospace-based earth work modelling in design stage was developed. Estimate of accurate earth work volume is achievable using 3D grid DEM, and based on this, a mass calculation chart was developed for movement of earth and equipment. In consideration for the resources for various construction equipments needed for civil engineering works, soil conversion and the passage is displayed. In addition, the result is restored in the form of open API-based KLM to make it possible for the users to identify the progress of the construction, thereby enhancing the intuitive understanding of three-dimensional visualization and making it easier to share the result of the analysis.

• Transactions of Materials Processing
• /
• v.16 no.4 s.94
• /
• pp.250-253
• /
• 2007

In hot strip rolling, the work roll profile is one of the main factors in predicting and correcting the strip profile. Various studies concerning the wear profile and the thermal crown of work roll have been performed, and the results of these studies have shown that the work roll profile must be predicted accurately so as to efficiently control the strip qualities such as thickness, crown, flatness, and camber. Therefore, a precise prediction model of roll profile is called for in a perfect shape control system. In this paper, a genetic algorithm was applied to improve on the roll profile prediction model in hot strip rolling. In this approach, the optimal design problem is formulated on the basis of a numerical model so as to cover the diverse design variables and objective functions. A genetic algorithm was adopted for conducting design iteration for optimization to determine the coefficient of the numerical model for minimization of errors in the result of the calculated value and the measured data. A comparative analysis showed a satisfactory conformity between them.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2008.05a
• /
• pp.74-77
• /
• 2008

In the relationship between exhibition space and art work in art museum, the Pluralism on the late of the 20th century made the new form of exhibition space to be appeared on the stage. Even if formal exhibition space that emphasized itself as a non-spatial background is currently being continued, the informal form of exhibition space is coming to the new art museums, especially after 1990's. This study is to understand how the advent of new designed the informal form of exhibition space in the Glytothek museum(the formal form of exhibition space) design a new paradigm In the relation between the exhibition space and art work in conjunction with public's perception. To do this, it is made clear that the Glytothek museum(the formal form of exhibition space) simply has played a role of non-spatial background. In other hands, the new designed informal form of exhibition space that is mainly presented after 1990's begins to Interrupt the public's perception of art work, changing it's meaning through a spatiality.

• Korean Institute of Interior Design Journal
• /
• v.19 no.1
• /
• pp.169-179
• /
• 2010

Since modernization period thru Japanese colonial era the modern architect began to play a important role for Korean housing architecture. So called 'House as an Art Work', detached houses by prominent architects, belong to a meaningful sector in Korean modern housing architecture. The harmony with tradition was always big issue for such works. This study aims to understand how paradigms for tradition were interpreted with the changes of the time. The analysis showed various tryout by architects, that concretize traditional characteristics in their work. For example, traditional lifestyle were clearly reflected in the floorplan during 30's and 40's. In the 70's building mass and formative roof design were emphasized to present traditional image. As well as it represented primitive esthetic and vernacular decoration. In addition, expressive tendency, that demonstrates korean sentiment through material and its texture, got a preference. Since latter half of 80's some traditional architectural elements were modernized and space characteristics were newly created from acculturation. Furthermore the philosophy of "Subdivision of building wings and Emptiness" follows this trend. This type made a courtyard and connected articulated building masses each other. "Sympathy with Nature" were most essential for a traditional houses in contrast with western architecture. Many architects today make various method to bring nature into interior space and to contemplate nature In the house. Such kinds of adaptation to tradition could be understood as a unique process to manifest identity of Korean modern houses.

• Design & Manufacturing
• /
• v.16 no.1
• /
• pp.21-26
• /
• 2022

In the CNC machining process, problems such as lowering of machine operation rate, setting errors, and machining precision occur due to the increase in setting time and preparation time. These machining errors cause delays in delivery and increase in cost due to an increase in the number of mounting and dismounting of the workpiece, an increase in measurement and reprocessing time, and an increase in the finishing time in the assembly process. Therefore, in this study, by automating the setting of the work piece using OMV (On Machine Verification), which is a meteorological measurement system, the preparation time for machining the work piece and the setting accuracy were improved, the rework rate was reduced, and the mold manufacturing process was shortened. Through the advancement, standardzation, and automation of the mold part manufacturing process, we have improved productivity by minimizing low-value-added repetitive tasks. In addition, the measurement time was reduced by more than 50% and the machining measurement rate was improved by more than 20%, eliminating repetitive work for correcting machining defects, and reducing the work preparation time by more than 15% through automatic setting.