• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.3
• /
• pp.192-198
• /
• 2007

In this paper, a new method to reduce the size of ROM in the direct digital frequency synthesizer(DDFS) is proposed. The new ROM compression method can reduce the ROM size by using the two ROM. The quantized value of sine is stored by the quantized-ROM(Q-ROM) and the differential ROM(D-ROM). To reduce the ROM size, we use the differential quantization technique with this two ROM. First, we quantize the quarter sine wave with the $2^L$ address and store the quantized value at the Q-ROM. Second, after the $2^L$ address are equally divided into $2^M$ sampling intervals, the sampling value is quantized. And the D-ROM store only the difference between this quantized value and the Q-ROM. So the total size of the ROM in the proposed DDFS is significantly reduced compared to the original ROM. The ROM compression ratio of 67.5% is achieved by this method. Also, the power consumption is affected mostly by this ROM reduction.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.2
• /
• pp.126-137
• /
• 2007

In this paper, a new method to reduce the size of ROM in the direct digital frequency synthesizer(DDFS) is proposed. And we design the phase-to-sine converter using the phase accumulator of parallel type for generating the high frequency. The new ROM compression method can reduce the ROM size by using the two ROM. The quantized value of sine is saved by the quantized-ROM(Q-ROM) and the differential ROM(D-ROM). So the total size of the ROM in the proposed DDFS is significantly reduced compared to the original ROM. The ROM compression ratio of 67.5% is achieved by this method. Also, the power consumption is decreased according to the ROM size reduction.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.4
• /
• pp.291-297
• /
• 2011

In this paper, the differential quantized method and the parallel method to reduce the size of ROM in the direct digital frequency synthesizer(DDFS) is proposed And we design the DDFS by FPGA The new ROM compression method can reduce the ROM size by using the two ROM. The quantized value of sine is saved by the quantized-ROM(Q-ROM) and the differential ROM(D-ROM). Also we design the phase-to-sine converter using the phase accumulator of parallel type for generating the high frequency. So the total size of the ROM in the proposed DDFS is significantly reduced compared to the original ROM The ROM compression ratio of 67.5% is achieved by this method. Also, the power consumption is decreased according to the ROM size reduction and we can design the DDFS generating the high frequency.

• Journal of Korea Game Society
• /
• v.11 no.1
• /
• pp.93-100
• /
• 2011

Cinematic camera techniques are being increasingly applied to the game development these days. In this study, the object movement and camera effect for the game development using the curve in the 3D space were discussed. The Catmull-Rom spline algorithm follows the curve more closely than the other curve algorithms. With the algorithm proposed in this study, the Catmull-Rom spline was dynamically created according to the user's input in multiple sections in the 3D space, and objects smoothly passed along the route. In addition, Cut-Scene section is specified using the Catmull-Rom spline and the object movement can be observed. The results of the study on the accuracy and efficiency of the curve showed that the Catmull-Rom spline is very efficient not only for the object movement but also for the cinematic camera technique.

• The KIPS Transactions:PartD
• /
• v.9D no.6
• /
• pp.1137-1144
• /
• 2002

Possibility of federation improvement requires flexibility and adaptability of member federates. Moreover, to develop and convert a non-HLA(High Level Architecture) compliant model as a HLA federate and allow this federate to be integrated with a changeable federation, more time and efforts will be necessary. In this research, I proposed a method to design and implement a ROM (RTI Object Model) Framework as a solution to this problem. ROM completely separates RTI (Run-Time Infrastructure) programming and simulation programming therefore providing epochal efficiencies in cost and productivity to the development a HLA federate that supports a changeable FOM. That is, ROM contains two layers : 1) a management layer that manages RTI services between the RTI and the federate and 2) a Foundation Class layer that actually updates/reflects objects and interactions. These two layers allow federate developers to use more generalized HLA services and automates the iterative, low-level RTI programming process.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.6
• /
• pp.78-86
• /
• 2003

When we transformed from Monochrome-data to Color-data in text mode, we used hardware-method to design the circuit which is convertible in real time. We saved color information in every screens that can make screen in Color Palette ROM and it is also generated 8bit. lower 4bit assign foreground color and upper 4bit can design to have background color. We have Address Reduction ROM to remove repeated address and reduce volume of Color Palette ROM to 1/16. Besides, we have many D-FF to save address, data and page information temporarily after that, we have management process 8 times through counter in real time. Finally, we chose either foreground color or background color in multiplex and established color information was sended to the color video controller. Thus, you can use it as a good interface when yow transfer many control devices with Monochrome display (ex, LCD Monitor) into devices with Color display.

• Convergence Security Journal
• /
• v.15 no.3_1
• /
• pp.99-105
• /
• 2015

A typical SRAM-based PUF is used in random number generation and key exchange process. The generated out puts should be preserved, but the values are changed owing to the external environment. This paper presents a new D-PUF logic employing a dual anti-fuse OTP memory to the SRAM-based PUF. The proposed PUF can enhance the reliability of the logic since it can preserve the output values. First, we construct the OTP memory using an anti-fuse. After power up, a SRAM generates the random values owing to the mismatch of cross coupled inverter pair. The generated random values are programed in the proposed anti-fuse ROM. The values that were programed in the ROM at once will not be changed and returned. Thus, the outputs of the proposed D-PUF are not affected by the environment variable such as the operation voltage and temperature variation, etc. Consequently, the reliability of the proposed PUF will be enhanced owing to the proposed dual anti-fuse ROM. Therefore, the proposed D-PUF can be stably operated, in particular, without the powerful ECC in the external environment that are changed.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.11
• /
• pp.152-161
• /
• 1996

This paper descrisbes the implementation of a 20D DCT that can be used for video conference, JPEG, and MPEG-related applications. The implemented DCT consists of two 1-D DCTs and a transposed memory between them, and uses ROM-based multipliers instead of conventional ones. As the system bit length, the minimum bit length that satisfies the accuracy specified by the ITU standard H.261 was chosen through the simulations using the C language. The proposed design uses a dual port RAM for the transposed memory, and processes two bits of input-pixel data simultaneously t ospeed up addition process using two sets of ROMs. The basic system architecture was designed using th Synopsys schematic editor, and internal modules were described in VHDL and synthesized to logic level after simulation. Then, the compass silicon compiler was used to create the final lyout with 0.8um CMOS libraries, using the standard cell approach. The final layout contains about 110, 000 transistors and has a die area of 4.68mm * 4.96mm, and the system has the processing speed of about 50M pixels/sec.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.2
• /
• pp.75-87
• /
• 2012

This study aims at measuring and comparing the joint range of motion(ROM) of the elderly, quantitatively understanding the joint ROM and duration for their dressing and undressing of pants with 3D motion analysis equipment, and thereby providing basic data necessary for the future development of clothes carrying functional designs. The findings are as follows. As for the study method, the 9-item joint ROM measurements were conducted with goniometer, and the questionnaire analyses were carried out for t-test, ANOVA, and regression analysis with spss12.0 program. The 3D motion analyses were handled with 3D Motion Analysis Package Version 3.1 Program. The findings are as follows. First, the ROM was shown to be significantly low, as the arthritis-pain consciousness level was felt higher by the subject than the average one. Seven ROM variables, such as hip flexion, hip adduction, hip internal rotation, hip external rotation, knee flexion, ankle dorsiflexion, and ankle plantar flexion, were shown to significantly affect the discomfort level experienced at the time of dressing or undressing. Second, in the motion of inserting the remaining leg into the pant crotch part(3e), the difference of angles in the hip joint and knee joint was the largest between the women in their 20s and the elderly women with arthritis. Third.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.1
• /
• pp.127-138
• /
• 2009

The purpose of this study was to investigate range of motion (ROM) and muscle activities according to the skills of Surya Namaskara in Vinyasa Yoga. Six females (skilled 2, unskilled 4) of university students participated in this experiment. The research factors were ROM and muscle activities for static poses on Surya Namaskara in Vinyasa Yoga. The six infrared cameras (Oqus 300, Qualisys Inc, Sweden) and Zero Wire EMG (Aurion, Italy) were used to acquire raw data, and the Qualisys Track Manager and Noraxon (MyoResearch XP Master Edition, USA) were used to process data. The %MVIC and ROM were analyzed with Visual 3D (C-Motion Inc, USA) and Noraxon. In conclusion, ROM and %MVIC between two groups were remarkable different according to the static poses of Yoga, therefore instructors have to provide step-by-step information that was suitable to themselves (ROM and EMG of poses).