• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.6
• /
• pp.30-39
• /
• 2017

A digital calibration technique based on digital-domain averaging for cyclic ADC is proposed. The proposed calibration compensates for nonlinearity of ADC due to capacitance mismatch of capacitors in 1.5-bit/stage MDAC. A 1.5-bit/stage MDAC with non-matched capacitors has symmetric residue plots with respect to the ideal residue plot. This intrinsic characteristic of residue plot of MDAC is reflected as symmetric A/D transfer functions. A corrected A/D transfer function can be acquired by averaging two transfer functions with non-linearity, which are symmetric with respect to the ideal analog-digital transfer function. In order to implement the aforementioned averaging operation of analog-digital transfer functions, a 12-bit cyclic ADC of this work defines two operational modes of 1.5-bit/stage MDAC. By operating MDAC as the first operational mode, the cyclic ADC acquires 12.5-bits output code with nonlinearity. For the same sampled input analog voltage, the cyclic ADC acquires another 12.5-bits output code with nonlinearity by operating MDAC as the second operational mode. Since analog-digital transfer functions from each of operational mode of 1.5-bits/stage MDAC are symmetric with respect to the ideal analog-digital transfer function, a corrected 12-bits output code can be acquired by averaging two non-ideal 12.5-bits codes. The proposed digital calibration and 12-bit cyclic ADC are implemented by using a $0.18-{\mu}m$ CMOS process in the form of full custom. The measured SNDR(ENOB) and SFDR are 65.3dB (10.6bits) and 71.7dB, respectively. INL and DNL are measured to be -0.30/-0.33LSB and -0.63/+0.56LSB, respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.3
• /
• pp.1-7
• /
• 2012

A 9b MS/s CMOS cyclic folding A/D converter (ADC) for intelligent battery sensor and battery management systems is proposed. The proposed ADC structure is based on a cyclic architecture to reduce chip area and power consumption. To obtain a high speed ADC performance, further, we use a folding-interpolating structure. The prototype ADC implemented with a 0.35um 2P4M n-well CMOS process shows a measured INL and DNL of maximum 1.5LSB and 1.0LSB, respectively. The ADC demonstrates a maximum SNDR and SFDR of 48dB and 60dB, respectively, and the power consumption is about 110mW at 2MS/s and 3.3V. The occupied active die area is $10mm^2$.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.9 no.3
• /
• pp.160-165
• /
• 2009

A 12b 2 MS/s cyclic ADC processing 3.3 Vpp single-ended rail-to-rail input signals is presented. The proposed ADC demonstrates an offset voltage less than 1 mV without well-known calibration and trimming techniques although power supplies are directly employed as voltage references. The SHA-free input sampling scheme and the two-stage switched op-amp discussed in this work reduce power dissipation, while the comparators based on capacitor-divided voltage references show a matched full-scale performance between two flash sub ADCs. The prototype ADC in a $0.18{\mu}m$ 1P6M CMOS demonstrates the effective number of bits of 11.48 for a 100 kHz full-scale input at 2 MS/s. The ADC with an active die area of $0.12\;mm^2$ consumes 3.6 m W at 2 MS/s and 3.3 V (analog)/1.8 V (digital).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.52-59
• /
• 2010

This paper proposes a high-resolution and high-frame rate CMOS image sensor with column-wise cyclic ADC. The proposed ADC uses the sharing techniques of OTAs and capacitors for low-power consumption and small silicon area. The proposed ADC was verified implementing the prototype chip as QVGA image sensor. The measured maximum frame rate is 120 fps, and the power consumption is 130 mW. The power supply is 3.3 V, and the die size is $4.8\;mm\;{\times}\;3.5\;mm$. The prototype chip was fabricated in a 2-poly 3-metal $0.35-{\mu}m$ CMOS process.

• Journal of IKEEE
• /
• v.16 no.4
• /
• pp.343-348
• /
• 2012

A 11b 100KS/s Algorithmic ADC for Digital PFC controller is proposed. The proposed Algorithmic ADC structure for 11bit resolution is based on a cyclic architecture to reduce chip area and power consumption. The prototype Algorithmic ADC implemented with a 0.18um 1Poly-3Metal CMOS process shows a SNDR 66.7dB and ENOB 10.78bits. And the current consumption is about 780uA at 100KS/s and 5V. The occupied active die area is $0.27mm^2$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12C
• /
• pp.1131-1137
• /
• 2009

In this paper, a resource management technique for digital duplexing (DD) systems using orthogonal frequency division multiple access (OFDMA) is proposed. The proposed technique can reduce the dynamic range of the signal received at the subscriber station (SS) and minimize the effects of inter-symbol interference (ISI) and inter-carrier interference (ICI) due to the time difference of arrival (TDoA) without using a cyclic suffix. It is shown by computer simulation that the proposed technique can reduce the number of bits for an analog-to-digital converter (ADC) and increase the signal-to-interference and noise ratio (SINR) significantly.