• 대한소아치과학회지
• /
• 제28권1호
• /
• pp.32-44
• /
• 2001

Er : YAG 레이저의 상아질 삭제효과와 이에 따른 온도변화를 평가하고자 발거된 소구치와 대구치로 상아세관내 조직액과 치수내압을 유지할 수 있는 상아질 시편을 제작하고 $2.94{\mu}m$의 pulsed Er : YAG 레이저(SDL-300EN, 삼성전자, 한국)를 handpiece형의 전달계를 이용한 비접촉식 방법으로 조사세기, pulse repetition rate, 조사시간, 물 분사여부 등의 조사조건을 달리하여 상아질 면에 조사하고 이때의 삭제량과 상아질 두께에 따른 온도변화, 그리고 삭제형태를 조사, 분석하여 다음과 같은 결과를 얻었다. 1. 레이저 조사세기와 pulse repetition rate가 클수록, 그리고 조사시간이 길수록 삭제량이 증가되었다(P<0.05). 그러나 5Hz의 pulse repetition rate에서는 조사시간에 따른 삭제량의 차이가 크지 않았다. 2. 삭제된 와동은 비교적 변연부가 명확하고 깨끗하였으며 와동의 바닥은 원추형이였으며 부드러웠다. 조사세기와 pulse repetition rate가 클수록, 그리고 조사시간이 길수록 와동의 상부 직경이 넓었으며 150mJ, 5Hz, 5sec에서는 와동변연부에 약간의 crack이 관찰되었다. 3. 레이저 조사세기와 pulse repetition rate가 클수록, 그리고 조사시간이 길수록 상아질의 온도가 더 많이 상승하였으며 시편의 두께가 두꺼울수록 온도상승이 적었다(P<0.05). 4. 물을 분사하며 레이저를 조사할 경우 물을 분사하지 않은 경우에 비해 온도상승이 매우 감소되었다(P<0.05). 이상의 결과를 종합해 볼 때 Er : YAG 레이저를 상아질에 조사할 경우 와동의 형태가 명확하고 물을 분사할 경우 온도상승이 많이 유발되지 않으므로써 삭제력이 좋고 치수에 유해작용이 없는 것으로 생각된다. 향후 임상에서 치질을 제거하는데 효율적으로 이용되기 위해서는 더욱 크고 이에 따른 온도상승을 최소로 할 수 있는 조사 시스템 및 방법에 대한 연구가 계속적으로 이루어져야 할 것으로 사료된다.

• 한국산림과학회지
• /
• 제88권4호
• /
• pp.438-445
• /
• 1999

벌채수준 및 시료 채취시기에 따른 토양수내 이온농도 변화를 알아보기 위해 전라남도 곡성군에 위치한 성숙한 리기다소나무조림지를 대상으로 4개의 벌채처리구(무벌채구, $6m{\times}50m$, $10m{\times}50m$, $20m{\times}50m$ 대상개별처리구)를 설치하고 zero tension lysimeter를 이용하여 98년 6월 20일부터 8월 4일까지 6주동안 3차례 (7월 6일, 7월 30일, 8월 4일) 토양수를 채취하여 분석한 결과, 토양수내 이온농도는 채취 시기별로 뚜렷한 차이를 보였으나 벌채수준이나 채취 깊이별(10cm, 30cm)로는 차이가 나타나지 않았다. 조사기간동안 토양수내 이온농도의 크기는 $NO{_3}^-$ > $Ca^{2+}$ > $Mg^{2+}$ > $NH{_4}^+$ 순이었으며 $NO{_3}^-$의 평균 농도는 3.60mg/L, $Ca^{2+}$ 1.7mg/L, $Mg^{2+}$ 0.5mg/L, $NH{_4}^+$ 0.04mg/L 였다. 토양수내 이온농도는 $NH{_4}^+$를 제외하고는 토양수량과 이온농도 사이에 부의 상관관계(r= -0.31~-0.41)가 있었으며 리기다소나무조림지내 토양수 이온농도의 변화는 벌채처리보다는 강수유입 형태가 보다 더 큰 영향을 미치고 있는 것으로 나타났다.

• 토지주택연구
• /
• 제14권3호
• /
• pp.137-144
• /
• 2023

토공계획은 자연상태의 원지반 토량을 절취하여 흐트러진 상태의 토량을 운반하고 성토지반의 활용도에 따라 다짐을 하는 과정에서 토질의 체적변화를 고려하여 수립하여야 한다. 흙의 상태에 따른 체적의 변화를 구하기 위해 일반적으로 심도 2m 깊이에서 시험굴 조사를 통해 얻어진 토량환산계수를 사용하게 되며, 굴착 깊이에 따른 토질의 성질을 고려하지 않고 전체 토공량에 일률적으로 적용하다 보니 토공량 산정에 오차가 발생하고 있다. 특히 신도시 택지개발과 같이 대량의 토공량이 필요한 조성공사의 경우 작은 오차에도 토공량의 차이는 크게 발생하게 된다. 본 연구에서는 심도 2m이상 토질의 물리적 특성을 조사하고 기존의 설계기준인 심도 2m의 토량환산계수와 비교 검토한 결과 굴착 심도가 깊고 대규모 토공사의 경우 심도별 토량환산계수(C)를 적용할 경우 절토량을 줄일 수 있는 것으로 나타났다.

• Journal of Forest and Environmental Science
• /
• 제3권1호
• /
• pp.17-20
• /
• 1983

제벌(除伐) 및 그 간단년수(間斷年數)가 잣나무림(林)의 성장(成長)에 미치는 영향(影響)을 조사(調査)하기 위해 1975년(年)에 설정(設定)한 시험림(試驗林)에 있어 각형질(各形質)의 성장(成長)을 처리별(處理別)로 비교(比較)한 결과(結果) 다음과 같은 결과(結果)를 얻었다. 1. 총재적량(總材積量)에 있어서는 설정시(設定時)부터 2위(位)이던 무처리구(無處理區)가 5년후(年後)인 1980년(年)부터 가장 많은 재적(材積)을 보여 1982년(年) 현재(現在) $83.27m^2/ha$를 보이고 있다. 2. 수고(樹高), 흉고직경(胸高直徑), 단목재적(單木材積)에 있어 설정(設定) 당시(當時)의 그 값과 비교(比較)한 성장율(成長率)에 있어서는 3년(年)마다 제벌구(除伐區)가 가장 높은 값을 나타내고 있다.

• 플랜트 저널
• /
• 제6권1호
• /
• pp.56-63
• /
• 2010

While the local plant market is reducing its volume, the plant market over the world since 2000s is rapidly expanding. The nation's construction companies, aggressively dedicated in launching out overseas plant market, increase the volume of orders in that sector, but there also are much difficulty in the project management as those projects ordered are gradually large scaled with more cutting-edge high-tech requirements along with comparatively higher risk. Though the local construction companies have developed their own types of measures to analyze the risk evaluation putting into practice, the specialized decision-making model for the overseas plant market or the risk measure understandable easily and applicable practically is not yet shown. This paper aims at providing the methodology to evaluate the risk by way of constructing the risk evaluation process in order to induce risk measuring elements through appropriate indexing system. Furthermore, through studying the risk management system, it aims to seek for a thorough risk management method from beginning of the project to the end.

• 패션비즈니스
• /
• 제12권6호
• /
• pp.81-92
• /
• 2008

The purpose of this study is to develop the applied brassiere pattern of women which are fitting for 75A. The constructing of this experimental brassiere were lower cup, upper cup, front panel and U-wing as well as a full cup embcing the entire breasts. Basing on the bra model from domestic experiment results, development of an applied design, round side type pattern, has been suggested. Thus, suggesting the round variation design bra, which is an applied design based on the basic model based on the breast volume. Based on the sizes that are in reference to Size Korea (2004) and related previous researches, the basic model that has been experimented with 11.4% polyurethane and 88.6% Nylon as the materials, has been selected as the model of research. This takes 75A, the size of which is set according to the underbust circumference and the breasts circumference, as the basic model. It is an application in terms of design, and there is no change to the cup volume or size because it has been moved only from the cutting line. The applied design changes the right side of the lower cup into an easily-movable form and attaches it to the upper cup, and the lower cup takes the right part of the upper cup to form a cup shape of round variation design. It also changes basic straight form of the wings, and alters them into U-shape.

• 한국분말재료학회지
• /
• 제14권6호
• /
• pp.348-353
• /
• 2007

In the present study, Zr-base metallic glass (MG) and Zr-base BMG/diamond composites were fabricated using a combination of gas atomization and spark plasma sintering (SPS). The microstructure, thermal stability and mechanical property of both the specimens as atomized and sintered were investigated. The experimental results showed that the SPSed specimens could be densified into nearly 100% and maintained the initial thermal stability at the sintering temperature of 630K. In addition, MG/diamond powder composites were successfully synthesised using SPS process. The composites, even a very low diamond volume fraction, generated a significant increase in compressive strength. With increasing the diamond volume fraction, the compressive strength was also increased due to the addition of hardest diamonds. It suggests that these composites would be potential candidates for a new cutting tool material.

• 한국농공학회지
• /
• 제27권2호
• /
• pp.47-56
• /
• 1985

Wasting fiberous residues from the cutting processes of steel materials at an iron-Works were mixed with concrete. The strength and toughness of steel fiber concrete with different steel contents were tested in a laboratory. The test results showed that the steel fiber residues can be used for the reinforcement of concrete. The potential applications of such product include floor constructions for facilities like dairy barns, grain storages, and machinery shops. The test results are as follows. 1. The compressive strengths of steel fiber concrete with one percent steel content by volume were 20 percent greater than that of plain concrete. The treatments also increased the concrete toughness by 96 percent. 2. When applied to tensile forces, the steel fiber concrete showed the increased strengths by 20 percent, and the toughness by 48 percent. 3. The steel content levels greater than or equal to 1.5 percent by volume resulted in the decreases of the compressive and tensile strengths of steel fiber concrete by 10 percent as compared to plain concrete. The concrete toughness increased with the steel contents. 4. The reinforcement effects of steel fiber depend on the quality of fiber material being used. Good steel fiber for concrete reinforcement appears to be uniform in shape and component, fine and long, and round-shaped.

• 드라이브 ㆍ 컨트롤
• /
• 제18권2호
• /
• pp.20-31
• /
• 2021

An excavator is a construction machine that can perform various tasks such as trenching, piping, excavating, slope cutting, grading, and rock demolishing. In the 2010s, unmanned construction equipment using ICT technology was continuously developed. In this paper, the path design process was studied to implement the output data of the decision stage, and the path design algorithm was developed. For example, the output data of the decision stage were terrain data around the excavator, excavator mechanism information, excavator hydraulic information, the position and posture of the bucket at key points, the speed of the desired bucket path, and the required excavation volume. The result of the path design was the movement of the hydraulic cylinder, boom arm, bucket, and bucket edge. The core functions of the path design algorithm are the function of avoiding impact during the excavation process, the function to calculate the excavation depth that satisfies the required excavation volume, and the function that allows the bucket to pass through the main points of the excavation process while maintaining the speed of the desired path. In particular, in the process of developing the last function, the node tracking method expressed in the path design table was newly developed. The path design algorithm was verified as this path design satisfied the JCMAS H02 requirement.

• 대한본초학회지
• /
• 제35권1호
• /
• pp.19-25
• /
• 2020

Objects : The daily dose of Pinelliae Tuber in ≪Treatise on Cold Damage Diseases≫ is half seung in volume, two and half ryang in weight, and fifteen in total number. But the daily dose should be a whole number. So I found out the background of this setting and correct solution. Methods : I searched Classics of Traditional Medicine, found out the background of the daily dose setting, solution. Results : The daily dose of Pinelliae tuber in ≪Hangdi's Internal Classic Miraculous Pivot≫, ≪Bohenggyuljangbuyongyakbeobyo≫ is half seung. ≪Treatise on Cold Dameage Diseases≫ followed the same daily dose of that because it referred to these books. In ≪Synopsis of Prescription of the Golden Chamber≫, the daily dose of that is half seung, one or two seung. The half seung of the Pinelliae Tuber is thirty three mL, but the diameter is 1~1.5 cm that accurate measurement by volume is difficult. The daily dose by weight is correct considering the unity of marking of the daily dose, accuracy of measurement, the fact that Pinelliae Tuber is currently distributed by cutting. So, two ryang is correct which is thirteen gram. Conclusions : Considering the traditionality, the convenience of measurement, the daily dose of Pinelliae Tuber in the ≪Treatise on Cold Damage Diseases≫ is half seung, but considering the unity, accuracy, current state of distribution, it is correct that the daily dose of it is two ryang. It corresponds to thirteen gram.