• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1647-1652
• /
• 2008

Track geometry consists of tangent and curved lines, which caused undesirable changes in initial track geometry by traffic loads. The bigger the changes are, the worse the riding comfort and running stability of train. This is so-called track irregularity and is the most important quality parameters of ballasted track. To be able to objectively assess track irregularity, track geometry should be able to be measured. Practically, railway companies use moving chord method, this method determine versine values via a chord. The versine is the vertical distance to curve measured in the middle of the chord. This type of method measures only versine of track irregularity curve by transfer function from specific property of measuring tool. In this report, review the characteristics of two types of measuring tools by comparing the measurements. The one is GRP-1000 system, optical surveying system with Total station and lazar prism trolly. This calculates track geometry by surveying absolute coordinates of two points each on both rail heads. The other is Trackmaster, measures versine with 2m of chord length.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.7
• /
• pp.103-110
• /
• 2008

This paper presents a new approach of recognizing a 3D object using a single camera, based on the extended convex hull of its silhouette. It aims at minimizing the DB size and simplifying the processes for matching and feature extraction. For this purpose, two concepts are introduced: extended convex hull and measurable region. Extended convex hull consists of convex curved edges as well as convex polygons. Measurable region is the cluster of the viewing vectors of a camera represented as the points on the orientation sphere from which a specific set of surfaces can be measured. A measurable region is represented by the extended convex hull of the silhouette which can be obtained by viewing the object from the center of the measurable region. Each silhouette is represented by a relation graph where a node describes an edge using its type, length, reality, and components. Experimental results are included to show that the proposed algorithm works efficiently even when the objects are overlapped and partially occluded. The time complexity for searching the object model in the database is O(N) where N is the number of silhouette models.

• Journal of Computational Design and Engineering
• /
• v.3 no.2
• /
• pp.151-160
• /
• 2016

Cutter-workpiece engagement (CWE) is the instantaneous contact geometry between the cutter and the in-process workpiece during machining. It plays an important role in machining process simulation and directly affects the calculation of the predicted cutting forces and torques. The difficulty and challenge of CWE determination come from the complexity due to the changing geometry of in-process workpiece and the curved tool path of cutter movement, especially for multi-axis milling. This paper presents a new method to determine the CWE for general milling processes. To fulfill the requirement of generality, which means for any cutter type, any in-process workpiece shape, and any tool path even with self-intersections, all the associated geometries are to be modeled as triangle meshes. The involved triangle-to-triangle intersection calculations are carried out by an effective method in order to realize the multiple subtraction Boolean operations between the tool and the workpiece mesh models and to determine the CWE. The presented method has been validated by a series of case studies of increasing machining complexity to demonstrate its applicability to general milling processes.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.2
• /
• pp.220-224
• /
• 2007

Second-order rate constants (kN) have been determined spectrophotometrically for reactions of 2,4-dintrophenyl 2-furoate (2) with a series of alicyclic secondary amines in 80 mol % H2O/20 mol % dimethyl sulfoxide (DMSO) at 25.0 oC. The furoate 2 is more reactive than 2,4-dintrophenyl benzoate (1) toward all the amines studied. The higher acidity of 2-furoic acid (pKa = 3.16) compared with benzoic acid (pKa = 4.20) has been suggested to be responsible for the reactivity order, at least in part. The Brønsted-type plots for the reactions of 1 and 2 are curved downwardly, indicating that the aminolyses of both 1 and 2 proceed through a zwitterionic tetrahedral intermediate (T±) with a change in the rate-determining step on changing the amine basicity. Dissection of the kN values into their microscopic rate constants has revealed that the pKao and k2/k-1 ratios for the reactions of 1 and 2 are identical, indicating that the nature of the nonleaving group (i.e., benzoyl and 2-furoyl) does not affect the reaction mechanism. The k1 values have been found to be larger for the reactions of 2 than for those of 1, which is fully responsible for the fact that the former is more reactive than the latter.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2664-2669
• /
• 2008

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damange, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle-installed downstream of the high pressure turbine extraction stream line- inside number 5A and 5B feedwater heaters. At that point, the extracted steam from the high pressure turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows in reverse direction after impinging the impingement baffle, the shell wall of the number 5 high pressure feedwater heater may be affected by flow-accelerated corrosion. This paper describes operation of experience and numerical analysis composed similar condition with real high pressure feedwater heater. This study applied squared, curved and new type impingement baffle plates to feedwater heater same as previous study. In addition, it shows difference of pressure distribution and value between single phase and two phase based on experience and numerical analysis.

• Korean Journal of Agricultural Science
• /
• v.27 no.1
• /
• pp.20-24
• /
• 2000

External morphological characteristics of male and female of Degeeria separata, which was endoparasited in adult of the Asian ladybird, were studied by using the scanning electron microscopy (SEM). The antenna of Degeeria separata was consisted of three segment and arista. Aristae were about $750{\mu}m$ length and $30{\mu}m$ in diameter. The surface of antennae was covered with many sensilla. They were long or short, slender or thick, and straight or curved. Each three morphological types of sensilla were observed on the second and third segment of antennae. The mouthpart was sponging type. It was consisted with clypeus, labellum, labium, labrum, and maxillary palp. The labellum is $400{\mu}m$ width and double folded vertically. The leg consist of tarsus, tarsus claw, pulvilli, and empodium.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.9
• /
• pp.483-495
• /
• 2009

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damange, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle-installed downstream of the high pressure turbine extraction stream line-inside number 5A and 5B feedwater heaters. At that point, the extracted steam from the high pressure turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows in reverse direction after impinging the impingement baffle, the shell wall of the number 5 high pressure feedwater heater may be affected by flow-accelerated corrosion. This paper describes operation of experience and numerical analysis composed similar condition with real high pressure feedwater heater. This study applied squared, curved and new type impingement baffle plates to feedwater heater same as previous study. In addition, it shows difference of pressure distribution and value between single phase and two phase based on experience and numerical analysis.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.5 s.23
• /
• pp.75-80
• /
• 2002

Depending upon geographical features and surrounding errors in the survey field, inaccurate positioning is inevitable in a kinematic DGPs survey. Therefore, a data inaccuracy detection algorithm and an interpolation algorithm are essential to meet the requirement of a digital map. In this study, GPS characteristics are taken into account to develop the data inaccuracy detection algorithm. Then, the data interpolation algothim is obtained, based on the feature type of the survey. A digital map for 20km of a rural highway is produced by the kinematic DGPS survey and the features of interests are lines associated with the road. Since the vertical variation of GPS data is relatively higher, the trimmed mean of vertical variation is used as criteria of the inaccuracy detection. Four cases of 0.5%, 1%, 2.5% and 5% trimmings have been experimented. Criteria of four cases are 69cm, 65cm, 61cm and 42cm, respectively. For the feature of a curved line, cublic spine interpolation is used to correct the inaccurate data. When the feature is more or less a straight line, the interpolation has been done by a linear polynomial. Difference between the actual distance and the interpolated distance are few centimeters in RMS.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.8
• /
• pp.737-744
• /
• 2017

A new ultralow density material (ULDM) named Shellular was recently introduced. Shellular has a periodic cellular structure with smooth-curved shells. The template for the first Shellular was fabricated using lithography and its shape was similar to the P-surface, a type of triply periodic minimal surface (TPMS). In this paper, a new fabrication method of Shellular with D-surface, named W-Shellular, is described. W-Shellular is fabricated based on weaving of polymer wires. The compressive properties are evaluated by experiments and analysis in comparison with the previous ULDMs.

• Advances in nano research
• /
• v.7 no.6
• /
• pp.419-429
• /
• 2019

The effect of an increasing percentage of nanofiller (glass cenosphere) with Glass/Epoxy hybrid composite curved panels modeled mathematically using the multiscale concept and subsequent numerical eigenvalues of different geometrical configurations (cylindrical, spherical, elliptical, hyperboloid and flat) predicted in this research article. The numerical model of Glass/Epoxy/Cenosphere is derived using the higher-order polynomial type of kinematic theory in association with isoparametric finite element technique. The multiscale mathematical model utilized for the customized computer code for the evaluation of the frequency data. The numerical model validation and consistency verified with experimental frequency data and convergence test including the experimental elastic properties. The experimental frequencies of the multiscale nano filler-reinforced composite are recorded through the impact hammer frequency test rig including CDAQ-9178 (National Instruments) and LABVIEW virtual programming. Finally, the nano cenosphere filler percentage and different design associated geometrical parameters on the natural frequency data of hybrid composite structural configurations are illustrated through a series of numerical examples.