• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8B
• /
• pp.721-729
• /
• 2004

In this paper, we applied a group scheduling algorithm to core nodes in an optical burst switching (OBS) network and measured its performance by simulation. For the case of core nodes with multi-channel input/output ports, performance of the group scheduling has been compared to that of the immediate scheduling. Since the group scheduling has a characteristic of scheduling a group of bursts simultaneously in a time window using information collected from corresponding burst header packets arrived earlier to a core node, simulation results show that the group scheduling outperforms the immediate scheduling in terms of both burst loss probability and channel utilization and the difference gets larger as the load increases. Another node configuration in which wavelength converters are equipped at the output ports has also been considered. In this case, even though both performance metrics of the group scheduling are almost the same as those of the immediate scheduling in the offered load range between 0.1 and 0.9, the group scheduling has lower wavelength conversion rate than the immediate scheduling by at least a factor of seven. This fact leads us to the conclusion that the group scheduling makes it possible to implement more economical OBS core nodes.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.2
• /
• pp.61-70
• /
• 2013

Hydrodynamic aspects on three-dimensional effects were investigated in this study for simple and convenient conversion of tidal stream energy using a Vertical-Axis Turbine (VAT). Numerical approach was made to reveal the differences of flow physics between 2-D estimation and rigorous 3-D simulation. It was shown that the 3-D effects were dominant mainly due to the variation of tip vortices around the tip region of rotor blade, causing the loss of lift for steadily translating hydrofoil and the reduction of torque for rotating turbine blade. The 3-D effect was found to be rather prominent for the typical VATs considered in this paper. Simple and yet efficient 2-D approach with the correction of its three-dimensionality was also proposed for practical design and analysis of VAT.

• Korean Journal of Poultry Science
• /
• v.43 no.3
• /
• pp.169-176
• /
• 2016

An experiment was conducted to evaluate the growth performance and meat quality traits of broilers fed a diet supplemented with dry-ground curry leaves (Murraya koenigii). A total of 750 one-day-old broiler chicks (Cobbs 500) were arranged in the experiment with a completely randomized design and allotted to one of five treatments, with $T_1-Control$ and $T_2-T_5$ curry leaves powder levels (i.e., 0.3%, 0.6%, 0.9% and 1.2%, respectively). The initial body weights, final body weights and daily feed intake were measured over an experimental period of 32 days. At the conclusion of the experiment, the carcass weights and meat quality parameters were measured. The birds fed diets supplemented with curry leaves powder had a higher weight gain (P<0.05; ADG), improved feed conversion ratio (P<0.05; FCR) and lower mortality (P<0.05) rates compared to the birds in the control group. Nonetheless, there was no difference (P>0.05) in feed intake among the dietary treatments. Similarly, supplementation of curry leaves powder had no effect (P>0.05) on the proportions of the carcass, leg meat and drumstick. No differences were (P>0.05) observed in cooking loss or the pH of meat from broilers fed the curry leaves supplemented diet. However, curry leaf supplementation affected (P<0.05) the meat water holding capacity. A sensory evaluation showed higher levels of taste and tenderness in meat from broilers fed with curry leaves powder. In conclusion, our results suggested that curry leaves powder improved the growth performance of broilers, with a lower incidence of mortality and improvement of some meat qualities.

• Molecules and Cells
• /
• v.40 no.10
• /
• pp.773-786
• /
• 2017

The loss of green coloration via chlorophyll (Chl) degradation typically occurs during leaf senescence. To date, many Chl catabolic enzymes have been identified and shown to interact with light harvesting complex II to form a Chl degradation complex in senescing chloroplasts; this complex might metabolically channel phototoxic Chl catabolic intermediates to prevent oxidative damage to cells. The Chl catabolic enzyme 7-hydroxymethyl Chl a reductase (HCAR) converts 7-hydroxymethyl Chl a (7-HMC a) to Chl a. The rice (Oryza sativa) genome contains a single HCAR homolog (OsHCAR), but its exact role remains unknown. Here, we show that an oshcar knockout mutant exhibits persistent green leaves during both dark-induced and natural senescence, and accumulates 7-HMC a and pheophorbide a (Pheo a) in green leaf blades. Interestingly, both rice and Arabidopsis hcar mutants exhibit severe cell death at the vegetative stage; this cell death largely occurs in a light intensity-dependent manner. In addition, 7-HMC a treatment led to the generation of singlet oxygen ($^1O_2$) in Arabidopsis and rice protoplasts in the light. Under herbicide-induced oxidative stress conditions, leaf necrosis was more severe in hcar plants than in wild type, and HCAR-overexpressing plants were more tolerant to reactive oxygen species than wild type. Therefore, in addition to functioning in the conversion of 7-HMC a to Chl a in senescent leaves, HCAR may play a critical role in protecting plants from high light-induced damage by preventing the accumulation of 7-HMC a and Pheo a in developing and mature leaves at the vegetative stage.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.24 no.6
• /
• pp.942-949
• /
• 2010

Morus alba L., a kind of Oriental medicinal herbs, has been traditionally used to treat pulmonary asthma and congestion. According to recent studies, extracts of M. alba L. have showed anti-inflammatory, anti-oxidant, anti-tumor and hypoglycemic effects. However, the molecular mechanisms on how it acts as a death-inducer in cancer cells have not been fully understood. In this study, we investigated the cell death effects of methylene chloride extracts of M. alba L. (MEMA) in A549 human lung carcinoma cells. It was shown that MEMA induced the apoptotic cell death proved by increased sub-G1 phase cell population, apoptotic body formation and chromatin condensation. MEMA treatment induced the expression of death receptor-related proteins such as death receptor (DR) 4, DR5, Fas and FasL, which further triggered the activation of caspase-8 and the cleavage of Bid in a concentration-dependent manner. However, MEMA reduced anti-apoptotic Bcl-2 and Bcl-xL expression which contributed to the loss of mitochondrial membrane potential (MMP), and the activations of caspase-9 and caspase-3. Meanwhile, the morphological study indicated a characteristic finding of autophagy, such as the formation of autophagosomes in MEMA-treated cells. Furthermore, markers of autophagy, namely, the increased MDC-positive cells, conversion of microtubule-associated protein light chain 3 (LC3)-I to LC3-II and increased beclin-1 accumulation, were observed. Taken together, these findings demonstrated that MEMA triggered both autophagy and apoptosis in A549 cancer cells. They might suggest that M. alba L. could be a prospective clinical application to treat human lung cancers.

• Applied Chemistry for Engineering
• /
• v.20 no.2
• /
• pp.186-190
• /
• 2009

This study is purposed to analyze thermodynamic properties on the hydrogen production by dimethyl ether steam reforming. Various reaction conditions of temperatures (300~1500 K), feed compositions (steam/carbon = 1~7), and pressures (1, 5, 10 atm) were applied to investigate the effects of the reaction conditions on the thermodynamic properties of dimethyl ether steam reforming. An endothermic steam reforming competed with an exothermic water gas shift reaction and an exothermic methanation within the applied reaction condition. Hydrogen production was initiated at the temperature of 400 K and the production rate was promoted at temperatures exceeding 550 K. An increase of steam to carbon ratio (S/C) in feed mixture over 1.5 resulted in the increase of the water gas shift reaction, which lowered the formation of carbon monoxide. The maximum hydrogen yield with minimizing loss of thermodynamic conversion efficiency was achieved at the reaction conditions of a temperature of 900 K and a steam to carbon ratio of 3.0.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.5
• /
• pp.575-583
• /
• 2009

Various algorithms and methods, related to preprocessing of LiDAR data, are being developed and proposed. These methods are two ways, one of them is to use the regular form such as DSM or the image converted from raw LiDAR data, and the other is to use raw LiDAR data directly. The image processing method is one of representative method for the regular grid form data. This method is easy to apply to a numerical analysis technique and has an advantage of modeling and noise elimination through smoothing, but it lose the information during the data conversion. This study apply the image processing method to the irregular raw LiDAR data directly for the extracting ground information with minimized information loss and evaluate the extracting accuracy of ground information.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.68-69
• /
• 2011

The process of charge transfer at the interface between two semiconductors or between a metal and a semiconductor plays an important role in many areas of technology. The optimization of such devices requires a good theoretical description of the interfaces involved. This, in turn, has motivated detailed mechanistic studies of interfacial charge-transfer reactions at metal/organic, organic/organic, and organic/inorganic semiconductor heterojunctions. Charge recombination of photo-induced electron with redox species such as oxidized dyes or triiodide or cationic HTM (hole transporting materials) at the heterogeneous interface of $TiO_2$ is one of main loss factors in liquid junction DSSCs or solid-state DSSCs, respectively. Among the attempts to prevent recombination reactions such as insulating thin layer and lithium ions-doped hole transport materials and introduction of co-adsorbents, although co-adsorbents retard the recombination reactions as hydrophobic energy barriers, little attention has been focused on the anchoring processes. Molecular engineering of heterogeneous interfaces by employing several co-adsorbents with different properties altered the surface properties of $TiO_2$ electrodes, resulting to the improved power conversion efficiency and long-term stability of the DSSCs. In this talk, advantages of the coadsorbent-assisted sensitization of N719 in preparation of DSSCs will be discussed.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.707-718
• /
• 2008

We derive a modified version of the cubic convolution scaler to enlarge or reduce the size of digital image with arbitrary ratio. To enhance the edge information of the scaled image and to obtain a high-quality scaled image, the proposed scaler is applied along the direction of an edge. Since interpolation along the direction of an edge has to process nonuniformly sampled data, the kernel of the cubic convolution scaler is modified to interpolate the data. The proposed scaling scheme can be used to resize pictures in various formats in a transcoding system that transforms a bit stream compressed at one bit rate into one compressed at another bit rate. In many applications, such as transcoders, the resolution conversion is very important for changing the image size while maintaining high quality of the scaled image. We show experimental results that demonstrate the effectiveness of the proposed interpolation method. The proposed scheme provides clearer edges, without artifacts, in the resized image than do conventional schemes. The algorithm exhibits significant improvement in the minimization of information loss when compared with the conventional interpolation algorithms.

• Fibers and Polymers
• /
• v.6 no.2
• /
• pp.103-107
• /
• 2005

An attempt was made to correlate the polymerization temperature and rheological and thermal properties of acrylonitrile (AN)-acrylamide (AM) copolymers. The copolymers were synthesized at different polymerization temperature. The copolymer structure was characterized by gel permeation chromatography (GPC) and Infrared spectrum (IR). The rheological and thermal properties were investigated by a viscometer and differential scanning calorimeter-thermogrametric (DSC-TG) analysis, respectively. When the polymerization temperature increased from $41^{\circ}C\;to\;65^{\circ}C$, the molecular weight $(\bar{M}_w)$ of copolymers decreased from 1,090,000 to 250,000, while its conversion increased from $18\%\;to\;63\%$, and the polymer composition changed slightly. To meet the requirements of carbon fibers, the rheological and thermal properties of products were also investigated. It was found that the relationship between viscosity and $\bar{M}_w$ was nonlinear and the viscosity index (n) decreased from 3.13 to 2.69, when the solution temperature increased from $30^{\circ}C\;to\;65^{\circ}C$. This suggests the dependence of viscosity upon $\bar{M}_w$ is higher at lower solution temperature. According to the result of activation energy, the sensivity of viscosity to solution temperature is higher for AN-AM copolymers synthesized at higher polymerization temperature. The result of thermal analysis shows that the copolymers obtained at higher polymerization temperature are easier to cyclization evidenced from lower initiation temperature. The weight loss behavior changed irregularly with polymerization temperature due to irregular change of liberation heat.