• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.367-374
• /
• 2010

The transfer slab system is a structural system that transfers the loads from the upper shear wall structure to the lower columns. This is a costly system due to a very thick slab, and the relatively high cost can be mitigated by introducing voids in the slab. However, this system of flat plate containing voids is vulnerable to brittle failure caused by punching shear in vicinity of slab-column connection. Thus, the punching shear capacity of the void system is very important. However, the current code doesn't provide a clear design provision for the strength of slabs with a void section. In this study, experimental study was conducted to investigate the punching shear strength of the void slab system. The shear strength of the specimens was predicted by current code and previous researches. In result, the punching shear strength of the void system is determined as the least value calculated at critical section located a distance d/2 from the face of the column and the center of the void section using the effective area at critical section.

• Journal of The Korean Association of Information Education
• /
• v.21 no.4
• /
• pp.451-462
• /
• 2017

This study selected 3D printing that is highly likely to be adopted in schools. This research was conducted in two stages: 1) proposing the learning activity framework for utilizing 3D printing in education, and 2) exploring the potential of integrating 3D printing in the school field. The '3D printing learning activity framework' proposed in this study includes four phases that are categorized according to the complexity of problem-solving processes and collaborative interaction: Step 1 as production through replication, Phase 2 as means of imaginary expression, Phase 3 as near problem-solving, and Phase 4 as expanded problem-solving. Next, we conducted the field study with 23 students in the 6th grade math class where they learned the various solid shapes and volumes through 3D printing-integrated activities. The lesson was considered as Phase 1, which is the production through replication. Overall, the results showed that the participants had positive perceptions about the efficacy of 3D printing activities, the quality of learning experience, and satisfaction. On the other hand, it was found that the usability of 3D printers and CAD program needs further improvement The contribution of this study can be found in the learning activity framework that can guide 3D printing activity design in school, and in the exploration of enhancing the connection between 3D printing activities and curricular relevance beyond simple interest toward a novel technology.

• Journal of The Korean Association For Science Education
• /
• v.24 no.2
• /
• pp.357-374
• /
• 2004

This paper described the types and characteristics of educational programs in major natural history museums of the world. Data were collected from the websites, annual reports, and written materials of the Natural History Museum at London, Australian Museum at Sydney, Field Museum of Natural History at Chicago, Smithsonian Museum at Washington D.C, Royal Tyrrell Museum at Canada and American Museum of Natural History at New York. As the result of this study, we presented ten types of educational programs, which were moveable museums, workshops, lecture/courses, festival/events, discovery activities, scientific exploration/research projects, field trips, youth curators/internship, loan materials and camp/tours. We also described the examples equivalent to each program type. The characteristics of educational programs provided by museums as informal learning settings were analyzed in terms of their themes, participation levels, connection with exhibition, relation to curriculum, and learning activity levels. Information in this paper will assist science teachers, museum educators and curators: (1) to design and implement various types and contents of educational programs; (2) to use characteristics of educational programs to assess and develop them; (3) to make important contributions to science education that involves the introduction of various scientific aspects and collections to the public, and the use of programs for science learning and teaching coherent to existing curricula.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.4
• /
• pp.477-483
• /
• 2008

The paper introduces mobile handset multi-band chip antenna to be used on meander line PIFA structure and parasite patch. The proposed antenna uses an FR-4 substrate. The top layer is consist of meander lines PIFA structure to implement GSM900 and is connected with each rad and meander line on the via-hole for maximize space efficiency. The middle layer is designed with the signal line and gap to implement a DCS and PCS bands, the bottom layer which is added to a parasite patch on the ground can be show an adjust of frequency and impedance character by the connection of the radiators of middle layer and coupling. The fabricated antenna with the dimension of $28{\times}6{\times}4\;mm^3$. The ground plane a dimension of $45{\times}90\;mm$, designed by a commercial software CST simulator. The experimental results show that the bandwidth for(VSWR<3) is 90($875{\sim}965$) MHz in GSM900 band operation and 380($1,670{\sim}2,050$) MHz in DCS, PCS band operation. The maximum gains of antenna are 0.25 dBi, 3.65 dBi and 3.3 dBi at resonance frequencies and it has omni-directional pattern practically.

• Korean Journal of Digital Imaging in Medicine
• /
• v.14 no.1
• /
• pp.13-20
• /
• 2012

In a normal x-ray examination, the cooperation of a patient in positioning greatly influences the improvement of work performance, the quality of the images and the reduction in time spent on the examination. An attempt was made to discover the connection between an examination information printout and the effects of the examination by informing the patient before the examination on the examination positions in order to increase the level of cooperation by the patient and by surveying the degree of satisfaction of the patient during the examination proceedings. An examination information printout was prepared on five positions that patients consider to be difficult while receiving normal x-ray examinations and were shown to 257 male and female patients between the ages of 30 to 79 who had visited this hospital between January 1 to February 29, 2012 or to a person who had accompanied the patients before the examination to research the degree of satisfaction regarding the printout. In addition, the examination explanation printout was given to Radiologic Technologists with over 1 year experience in this hospital to use while taking the x-rays and the degree of satisfaction was surveyed and it was examined if the increase of the degree of satisfaction had an effect on the reduction in the examination time. The patients who utilized the examination information printout revealed results of approximately a 7.8% higher degree of satisfaction among the patients who had previous experience receiving x-ray examinations compared to those were having an x-ray for the first time. In the age groups between 30 to 70 years of age, the age group in the 30's revealed the lowest level of satisfaction at approximately 69% and the group in the 50's showed the highest degree of satisfaction of 87.94%. In the survey of the Radiologic Technologists, 85% responded that they were satisfied. In the question that stated "Will the examination information printouts reduce the time involved in unnecessary conversations with the patients?," the responses showed a 95% degree of satisfaction. The degree of satisfaction was high over the examination information printout by both the patients and the Radiologic Technologists. Although the effects of examination time reduction varied based on the ages of the patients and physical conditions that they were in and could not be given measurement values, it was able to be seen through the survey that reduction of the unnecessary communication between the patient and the Radiologic Technologists contributed to the increase in the degree of satisfaction. As a result, both the patients and the Radiologic Technologists had an increased degree of satisfaction over the examination information printout and it was possible for improvements to be made in the quality of medical service provided as well. Nevertheless, it is considered that a more developed manual in terms of quality and quantity must be produced using a more systematic approach and design.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.1
• /
• pp.43-54
• /
• 2009

As R&D(Research and Development) is going on actively to develop technologies for the ubiquitous computing environment, which Is the human-oriented future computing environment, GIS dealing with spatio-temporal data is emerging as a promising technology. This also increases the necessity of the middleware for providing services to give interoperability in various heterogeneous environments. The core technologies of the middleware are real-time processing technology of data streams coming unceasingly from positioning systems and data stream processing technology developed for non-spatio-temporal data. However, it has problems in processing queries on spatio-temporal data efficiently. Accordingly, this paper designed and implemented the spatio-temporal middleware that provides interoperability between a mobile spatio-temporal DBMS(DataBase Management System) and a server spatio-temporal MMDBMS(Main Memory DataBase Management System). The spatio-temporal middleware maintains interoperability among heterogeneous devices and guarantees data integrity in query processing through real-time processing of unceasing spatio-temporal data streams and two way synchronization of spatio-temporal DBMSs. In addition, it manages session for the connection of each spatio-temporal DBMS and manages resources for its stable operation. Finally, this paper proved the usability of the spatio-temporal middleware by applying it to a real-time position tracking system.

• Korean Journal of Remote Sensing
• /
• v.31 no.3
• /
• pp.215-226
• /
• 2015

Normally, aero photography using UAV uses about 430 MHz bandwidth radio frequency (RF) modem and navigates and remotely controls through the connection between UAV and ground control system. When using the exhausting method, it has communication range of 1-2 km with frequent cross line and since wireless communication sends information using radio wave as a carrier, it has 10 mW of signal strength limitation which gave restraints on life my distance communication. The purpose of research is to use communication technologies such as long-term evolution (LTE) of smart camera, Bluetooth, Wi-Fi and other communication modules and cameras that can transfer data to design and develop automatic shooting system that acquires images to UAV at the necessary locations. We conclude that the android based UAV filming and communication module system can not only film images with just one smart camera but also connects UAV system and ground control system together and also able to obtain real-time 3D location information and 3D position information using UAV system, GPS, a gyroscope, an accelerometer, and magnetic measuring sensor which will allow us to use real-time position of the UAV and correction work through aerial triangulation.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.3
• /
• pp.249-260
• /
• 2017

In order to investigate the structural performance of a novel prefabricated-SRC column using bolt-connected steel angles(PSRC column), eccentric axial loading tests were performed for six PSRC column specimens and two conventional SRC column specimens. The test parameters were the spacing and sectional configurations of lateral reinforcement, and eccentricity ratio of axial load. The test results showed that, due to high axial-stiffness of the angles located at the corners of the cross section, the compressive load-carrying capacity and deformation capacity of the PSRC specimens were greater than those of the SRC specimens in the large eccentricity ratio of axial load. Closely spaced lateral steel plates and Z-shaped lateral steel plates improved lateral confinement, which increased the load-carrying capacity of the PSRC specimens. The combined flexural and axial load-carrying capacity of the specimens by tests and nonlinear numerical analysis were greater than the predictions by current design codes. The numerical analysis agreed well with the test results including the initial stiffness, peak strength, and post-peak strength degradation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.4
• /
• pp.65-73
• /
• 2008

Due to the amendment of the Act for Urban Parks in 2005, local governments have to establish long-range plans for securing and managing urban parks and green areas. This study aims to propose a method of setting priorities for green areas of land to be preserved before the development stage through the introduction of the concept of Green Infrastructure Assessment, and provide basic data to establish the network of urban parks and green areas by applying the GIA method to the city of Daejeon. The concept of GIA and the process of analysis have been drawn as a result of literature research and case studies. The results of this study show that an introduction of the GIA concept to set park and open space planning promotes the connection of the city planning process as well as presents very a reasonable source to facilitate sustainable development. Also, other results present a priority ranking for protection of parks and green areas as well as a means to manage potential focus areas. This study, does have research limitations such as a limited study area, scale, and conflicts between domestic and foreign computing data. Further studies need to set the planning process and examine the index survey to apply this method to various situations and areas.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.981-986
• /
• 2020

The Internet of Things refers to a space-of-things connection network configured to allow things with built-in sensors and communication functions to interact with people and other things, regardless of the restriction of place or time.IoT is a network developed for the purpose of services for human convenience, but the scope of its use is expanding across industries such as power transmission, energy management, and factory automation. However, the communication protocol of IoT, MQTT, is a lightweight message transmission protocol based on the push technology and has a security vulnerability, and this suggests that there are risks such as personal information infringement or industrial information leakage. To solve this problem, we designed a synchronous MQTT security channel that creates a secure channel by using the characteristic that different chaotic dynamical systems are synchronized with arbitrary values in the lightweight message transmission MQTT protocol. The communication channel we designed is a method of transmitting information to the noise channel by using characteristics such as random number similarity of chaotic signals, sensitivity to initial value, and reproducibility of signals. The encryption method synchronized with the proposed key value is a method optimized for the lightweight message transmission protocol, and if applied to the MQTT of IoT, it is believed to be effective in creating a secure channel.