• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.315-316
• /
• 2006

As IEC 61850 based substation automation technology is emerging globally, there are many efforts to implement and apply this IEC 61850 standard to substation automation area. IEC 61850 based substation supports ethernet network, standard data model and SCL(substation Configuration Language), etc. These features can provide enough environment to make applied technology which can substitute the legacy relay trip logic configuration method(PLC or Local area reconstruction) to XML based configuration method. This paper suggests new IED trip logic configuration method. The XML based trip logic configuration method can be established using SCL technology And IED trip logic reconfiguration from remote center can be possible under ethernet based technology

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.199-200
• /
• 2017

The Configuration Management(CM) of Nuclear Power Plant(NPP) is an activity that maintains consistency among the design requirement, facility configuration information and physical configuration. It is a systematic approach to performing various engineering tasks such as change management by identifying, documenting the characteristics of plant Structures, Systems and Component(SSC). The first activity that should be performed the configuration baseline setting at the start of project. The configuration baseline of the NPP construction phase is the status of the SSC of the plant at a specified process and time, and the actual configuration changes depending on the condition of plant. In this paper, I have studied the current status of configuration baseline used in the software industry and general plant industry, method of establishment for the configuration baseline which was first applied to the construction of NPP.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1998년도 추계학술대회 논문집
• /
• pp.407-410
• /
• 1998

Configuration is a set of building block processes, a series of selection and combining parts or components which composes a whole thing. A whole thing could be such a configurable object as manufacturing product, network system, financial portfolio, system development plan, project team, etc. Configuration problem could happen during any phase of product life cycle: design, production, sales, installation, and maintenance. Configuration has long been one of cost and time consuming work, because only high salaried technical experts on product and components can do configuration. Rework for error adjustments of configurations at later process causes far much cost and time, so accurate configuration is required. Under the on-line electronic commerce environment, configuration problem solving becomes more important, because component-based sales should be done automatically on the merchant web site. Automated product search, order placement, order fulfillment and payment make that manual configuration is no longer feasible. Automated configuration means that all the constraints among components should be checked and confirmed by configuration engine automatically. In addition, technical constraints and customer preferences like price range and a specific function required should be considered. This paper gives an brief overview of configuration problems: characteristics, representation paradigms, and solving algorithms and introduce CRSP(Constraint and Rule Satisfaction Problem) method. CRSP method adopts both constraint and rule for configuration domain knowledge representation. A survey and analysis on web sites adopting configuration functions are provided. Future directions of configuration for EC is discussed in the three aspects: methodology itself, companies adopting configuration function, and electronic commerce industry.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.929-930
• /
• 2007

박막재료 및 반도체의 면저항 측정에는 주로 Four Point Probe(FPP) 원리를 이용한 측정기를 사용하고 있다. FPP에 의한 측정방식은 single 및 dual configuration method가 있으며, dual configuration은 single configuration에 비해 probe spacing 변화나 시료의 가장자리 효과 등에서 측정편차가 적은 장점이 있어서 dual configuration 기술을 사용하는 추세이다. 개발된 휴대용 면저항 측정기는 dual configuration원리를 적용하여 제작되었으며, 박막재료의 면저항을 누구나 쉽고 정확하게 측정할 수 있도록 설계되었다. 또한 시료의 크기가 핀 간격에 비해 5배 이상 크면 보정계수를 거의 무시할 수 있는 장점이 있어 작은 시료라도 정확한 면저항을 측정할 수 있다. 이측정기의 측정 불확도는 지시값의 1 % 이하이고, 측정범위는 (2$\sim$2000)$\Omega/sq$이다.

• Nuclear Engineering and Technology
• /
• 제39권2호
• /
• pp.123-128
• /
• 2007

In order to apply a static fault-tree (FT) method to a system or a plant whose configuration changes dynamically, condition gates and a post processing method are used to effectively accommodate these changes. An operator's performance change, which can be caused by these configuration changes, should also be considered to assess the risk to a plant in a more realistic manner. This study aims to develop an integrated framework to accommodate various configuration changes and their effect on an operator’s performance by using the FT model. We applied a condition-based human reliability assessment (CBHRA) method to consider various conditions endured by an operator. That is, we integrated the CBHRA method with the conventional post processing method for modeling the system configuration changes. The effect of the condition monitoring systems installed in a plant is also considered. In this study, we show an example application of the integrated framework to a probabilistic safety assessment for the shutdown phase of a nuclear power plant.

• 한국항해학회지
• /
• 제24권1호
• /
• pp.47-56
• /
• 2000

As a shipboard dependency for the safety and reliability becomes very important, the need for solid systems providing non-stop workload has been increased. This system is heartbeat that transmits shipboard state, audit and control information to the land. So, this paper describes a ship's LAN configuration method for the safety and reliability. In order to achieve these requirements, network, server and disk fault tolerance techniques are surveyed, and dual network configuration model, cluster server configuration method are presented and tested based on the survey.

• 한국생산제조학회지
• /
• 제7권3호
• /
• pp.110-117
• /
• 1998

A continuum-based configuration design sensitivity analysis method is developed for kinematically driven mechanical systems. The configuration design variable for mechanical systems is defined. The 3-1-3 Euler angle is employed as the orientation design variable. Kinematic admissibility conditions of configuration design change. Direct differentiation method is used to derive the governing equations of the design sensitivity. Numerical examples are presented to demonstrate the validity and effectiveness of the proposed method.

• 전기학회논문지P
• /
• 제59권4호
• /
• pp.423-427
• /
• 2010

Portable sheet resistance-measuring instrument using the dual-configuration Four-Point Probe method is developed for the purpose of precisely measuring the sheet resistance of conducting thin films. While single-configuration Four-Point Probe method has disadvantages of applying sample size, shape and thickness corrections for a probe spacing, the developed instrument has advantages of no such corrections, little edge effects and measuring simply and accurately the sheet resistance between $0.2\Omega/sq$ and $2k\Omega/sq$.

• 한국CDE학회논문집
• /
• 제5권4호
• /
• pp.380-392
• /
• 2000

This paper proposes a qualitative reasoning approach for the spatial configuration of mechanisms that could be applied in the early phase of the conceptual design. The spatial configuration problem addressed in this paper involves the relative direction and position between the input and output motion, and the orientation of the constituent primitive mechanisms of a mechanism. The knowledge of spatial configuration of a primitive mechanism is represented in a matrix form called spatial configuration matrix. This matrix provides a compact and convenient representation scheme for the spatial knowledge, and facilitates the manipulation of the relevant spatial knowledge. Using this spatial knowledge of the constituent primitive mechanisms, the overall configuration of a mechanism is described and identified by a spatial configuration state matrix. This matrix is obtained by using a qualitative reasoning method based on sign algebra and is used to represent the qualitative behavior of the mechanism. The matrix-based representation scheme allows handling the involved spatial knowledge simultaneously and the proposed reasoning method enables the designer to predict the spatial behavior of a mechanism without knowing specific dimension of the components of the mechanism.

• 한국컴퓨터정보학회논문지
• /
• 제10권4호
• /
• pp.123-132
• /
• 2005

버전 제어 시스템은 급속한 환경의 변화나 개발 환경이 복잡한 프로그래밍 환경에서 사용되고 있으며, 형상 형성 (configuration thread) 정보의 제공과 이의 처리 방법은 버전 제어에서 중요한 역할을 하고 있다. DSEE에서의 시스템 모형, ClearCase의 뷰, SourceSafe의 레이블, CCC/Harvest의 패키지 등의 형상 형성도구들은 정형화된 형상 규칙을 사용자가 적용하여 필요한 버전에 대한 형상 정보를 얻고 있다. 그러나, 이들 방법에서는 정의된 형상 규칙 정보를 정확하게 알지 못하는 경우나 미리 정의되지 않은 정보에 대해서는 형상 형성 정보 제공 문제가 발생한다. 또한, 이들 정보는 세부적으로 연계된 정의되지 않은 관련 버전이나 메타 정보를 제공하지 못하는 단점을 가지고 있다. 본 논문에서는 이러한 문제를 해결하고 효율적인 형상 형성제어를 위한 시스템을 모델링하고 구현하였다. 이 시스템에서는 형상 형성 정보를 효율적으로 제공하기 위해 부울리언 검색 모델과 벡터 검색 모델을 결합한 혼합 검색 모델을 제안하였으며, 라이브러리는 확장 facet 방법을 응용하여 설계하였다.