• 한국CDE학회논문집
• /
• 제4권4호
• /
• pp.318-326
• /
• 1999

Recently, electronic systems including computers have been rapidly shrinking in size while at the same time the complexity and the capability of these systems continue to grow/sup [1]/. Thus, system volumes have decreased as system power has increased, resulting in dramatic increases in system heat density. The high temperature of the computer system is considered as the major reason for low performance and shortening life of the product. It is necessary to solve this problem due to the heat density increased and to develop the design skill of the computer cabinet according to miniaturization. M4500 desk-top computer was selected for analyzing the thermal management inside cabinet. The cabinet volume, the configuration of the heating devices, the size and location of air ventilation, and the fan selection have been investigated as the important parameters to find out an optimal cabinet design. The objectives of this project were to analyze which design parameters would affect cooling performance by thermal strategy, to design an optimal model, and to measure the temperatures of the main parts to confirm the effect of the thermal design. The temperatures of each part of the optimal model were compared with those of the existing model. As a result. the volume of this miniaturized model was about 16% smaller than that of M4500 without any change in operating performance.

• 한국실내디자인학회논문집
• /
• 제16권4호
• /
• pp.119-126
• /
• 2007

A prototype design process visualization and guidance system, is being developed. Its purpose is to visualize the design process in more intuitive manner so that one can get an insight to the complicated aspects of the design process. By providing a tangible utility to the design process performed by the expert designers or guided by the system, novice designers will be greatly helped to learn how to approach a certain class of design. Not only as an analysis tool to represent the characteristics of the design process, the system will be useful also for learning design process. A design ontology is being developed to provide the system with a knowledge-base, representing designer's activities associated with various design information during the conceptual design process, and then to be utilized for a computer environment for design analysis and guidance. To develop the design ontology, a conceptual framework of design activity model is proposed, and then the model has been tested and elaborated through investigating the nature of the early conceptual design. A design process representation model is conceptualized based on the ontology, and reflected into the development of the system. This paper presents the development process of the visualization system, modeling of design process ontology, and how the system could be utilized for the analysis and learning of conceptual design methods using computer mediated design support environment.

• International Journal of Computer Science & Network Security
• /
• 제24권4호
• /
• pp.141-146
• /
• 2024

A local area network (LAN) is a computer network within a small geographical area such as a home, school, computer laboratory, office building or group of buildings. A LAN is composed of interconnected workstations and personal computers which are each capable of accessing and sharing data and devices, such as printers, scanners and data storage devices, anywhere on the LAN. LANs are characterized by higher communication and data transfer rates and the lack of any need for leased communication lines. Communication between remote parties can be achieved through a process called Networking, involving the connection of computers, media and networking devices. When we talk about networks, we need to keep in mind three concepts, distributed processing, network criteria and network structure. The purpose of this Network is to design a Local Area Network (LAN) for a BAEC (Bangladesh Atomic Energy Commission) Head Quarter and implement security measures to protect network resources and system services. To do so, we will deal with the physical and logical design of a LAN. The goal of this Network is to examine of the Local Area Network set up for a BAEC HQ and build a secure LAN system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.851-856
• /
• 1996

In this paper, we introduce the design method using CAE(Computer Aided Engineering) which is profitable in the compatability and standardization of the developed product, and the reduction of construction time and price to develop and design a machine equipment. Particularly, we select the standard model to design or develop from the large machinery to the super precision one, extract the peculiar characters of the model by the close analysis of the physical and technical part, the experiment for the characteristics of objective dimensions by analogical mathematical analysis for previous results, and can induce the design model demanded by user investigating optimal data in the design previous We present the analogical algorithms and process method of design factors and restriction factors in the systematization design with computer. Then we analyze step functions for each systematization equipment and induce the process of technical data with actuator model.

• 산업경영시스템학회지
• /
• 제34권3호
• /
• pp.8-15
• /
• 2011

The computer-based simulation tools are currently used overwhelmingly to simulate the performance of automotive designs. Then, the search for an optimal solution that satisfies a number of performance requirements usually involves numerous iterations among several simulation tools. Therefore, meta-modeling techniques are becoming widely used to build approximations of computationally expensive computer analysis tools. The set-based approach proposed in the first report of a four-part paper has been a test bed for the innovation of vehicle structure design process in the Structural Design and Fabrication Committee of JSAE(Society of Automotive Engineers of Japan). In the second report, the proposed design approach is illustrated with a side-door impact beam design example using meta-modeling techniques.

• 공학교육연구
• /
• 제21권6호
• /
• pp.74-80
• /
• 2018

This paper proposes practical teaching methods for efficient progress of project-based learning in engineering design education. Engineering design courses consist of three categories; introductory, individual and capstone design courses. This study concentrates on the case of individual design courses. Individual design courses act as bridges between introductory and capstone design courses and deal with applicable projects based on theoretical frameworks. In this study, practical teaching methods are applied to Artificial Intelligence curriculum as an individual design course for Juniors in Computer Engineering Major. The results on application of practical teaching methods show relatively positive in all aspects.

• 산업경영시스템학회지
• /
• 제21권47호
• /
• pp.233-241
• /
• 1998

With the increasing complexity of man-made systems, computer simulation has become a widely used tool for the design and analysis of complex system. When computer simulation is used for the purpose of system design, the analysts want to develop strategies to achieve some pre-defined target condition for an output of interest while simultaneously minimizing its variance. The goal of this research is to develop and demonstrate a new method for the design of robust systems with multiple responses using the fuzzy satisfaction function and computer simulation experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.29-29
• /
• 2000

This paper describes the design and implementation of a high-speed navigation computer to achieve precision navigation performance with Strapdown INS. The navigation computer inputs are velocity and angular increment data from the ISA at the signal of the 2404Hz interrupt and performs the removal of gyro block motion and the compensation of high dynamic errors at the 200Hz. For high-speed and high-accuracy, the computer consists of the 68040 micro-processor, 128k Memories, FPGAs, and so on. We show that the computer satisfies the required performance by In-Run navigation tests.

• 대한기계학회논문집
• /
• 제9권5호
• /
• pp.647-654
• /
• 1985

본 논문에서는 미소한 비대칭 요소를 갖는 축대칭 셸구조물(종형구조물 또는 용접된 압력용기등)의 전산기 이용 도면입력/수정/출력, 체적특성치의 자동결정, 근사 고속 유한요소해석 및 출력을 시각화하는 일관 작업을 수행할 수 있는 전산기이용설계 알고리즘을 개발하고 생산가공에 대한 공리적 접근방법을 전산화하는 전산기이용 공정 계획 알고리즘에 대한 기초적인 연구를 행하였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제40권
• /
• pp.2.1-2.7
• /
• 2018

With the development of computer-aided design/computer-aided manufacturing (CAD/CAM) technology, it has been possible to reconstruct the cranio-maxillofacial defect with more accurate preoperative planning, precise patient-specific implants (PSIs), and shorter operation times. The manufacturing processes include subtractive manufacturing and additive manufacturing and should be selected in consideration of the material type, available technology, post-processing, accuracy, lead time, properties, and surface quality. Materials such as titanium, polyethylene, polyetheretherketone (PEEK), hydroxyapatite (HA), poly-DL-lactic acid (PDLLA), polylactide-co-glycolide acid (PLGA), and calcium phosphate are used. Design methods for the reconstruction of cranio-maxillofacial defects include the use of a pre-operative model printed with pre-operative data, printing a cutting guide or template after virtual surgery, a model after virtual surgery printed with reconstructed data using a mirror image, and manufacturing PSIs by directly obtaining PSI data after reconstruction using a mirror image. By selecting the appropriate design method, manufacturing process, and implant material according to the case, it is possible to obtain a more accurate surgical procedure, reduced operation time, the prevention of various complications that can occur using the traditional method, and predictive results compared to the traditional method.