Journal of Korean Society of Industrial and Systems Engineering (산업경영시스템학회지)

Society of Korea Industrial and System Engineering (한국산업경영시스템학회)
권호 표지

Set-Based Multi-objective Design Optimization at the Early Phase of Design (The Second Report) : Application to Automotive Side-Door Impact Beams

초기 설계단계에서의 셋 베이스 다목적 설계 최적화(제2보) : 자동차 사이드 도어 임팩트 빔에의 적용

  • Nahm, Yoon-Eui (Department of Mechanical Design Engineering, Hanbat National University)
  • 남윤의 (국립한밭대학교 기계설계공학과)
  • Received : 2011.06.01
  • Accepted : 2011.09.22
  • Published : 2011.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

The computer-based simulation tools are currently used overwhelmingly to simulate the performance of automotive designs. Then, the search for an optimal solution that satisfies a number of performance requirements usually involves numerous iterations among several simulation tools. Therefore, meta-modeling techniques are becoming widely used to build approximations of computationally expensive computer analysis tools. The set-based approach proposed in the first report of a four-part paper has been a test bed for the innovation of vehicle structure design process in the Structural Design and Fabrication Committee of JSAE(Society of Automotive Engineers of Japan). In the second report, the proposed design approach is illustrated with a side-door impact beam design example using meta-modeling techniques.

Keywords

References

  1. Hage, H., Ishikawa, H., Ishibai, N., Daikyu, H., Nahm, Y. E., Nishigaki, H., Miyachi, T., Yoshida, Y., and Watanabe, K.; "Current Situation and Problems in Automotive Design," Proceedings of the Society of Automotive Engineers of Japan (JSAE) Symposium, 12(04) : 15-18, 2004(in Japanese).
  2. Sakai, H., Shimizu, K., and Yamaoka, N.; "Computer-Aided Optimization System (CAOS) for Optimal Designing of Electronic Equipment," FUJITSU, 51 (5) : 275-279, 2000(in Japanese).
  3. Chen, W., Allen, J. K., and Mistree, F.; "A Robust Concept Exploration Method for Enhancing Productivity in Concurrent System Design" Concurrent Engineering : Research and Applications, 5(3) : 203-217, 1997. https://doi.org/10.1177/1063293X9700500302
  4. Simpson, T. W., Peplinski, J., Koch, P. N., and Allen, J. K.; "Metamodels for Computer-Based Engineering Design : Survey and Recommendations," Engineering with Computers, 17(2) : 129-150, 2001. https://doi.org/10.1007/PL00007198
  5. Kashiwamura, T., Shiratori, M., Yu, Q., and Kohda, I.; "Structural Optimization Using the Design of Experiments and Mathematical Programming," Transactions of the Japan Society of Mechanical Engineers (JSME) A, 62(601) : 2180-2185, 1996(in Japanese). https://doi.org/10.1299/kikaia.62.2180
  6. Kashiwamura, T.; Jikkennkeikakuhou ni yoru hisenkeimonndai no saitekika, Asakura Shouten, 1998(in Japanese).
  7. 유우식, 김권흡, 정영배; "다구찌 기법을 이용한 유리소재의 블라스팅 가공공정의 최적화에 관한 연구', 한국산업경영시스템학회지, 30(2) : 8-14, 2007.
  8. Engineous Software, Inc., http://www.engineous.com
  9. Vanderplaats, Miura and Associates, Inc., http://www.vma.com
  10. 남윤희; "초기 설계단계에서의 셋 베이스 다목적 설계 최적화(제1보) : 이론 및 설계지원 시스템", 한국산업경영시스템학회지, 34(2) : 112-120, 2011.
  11. Todoroki, A., http://todoroki.arrow.jp/ssoft/soft.html.