• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.63-66
• /
• 2008

Not only mechanical properties, bonding properties, electro chemical properties, etc. but also fire safety is required in patch repair materials such as polymer modified cement mortar (PCM) which are used to deteriorated reinforced concrete structure. Unfortunately, it is very difficult to choice the appropriate repair materials because there are not enough information about fire safety properties of PCM. In this study, The combustion characters of PCM were evaluated through the heat release rate test and non-combustibility test. The pyrogenicity test uses the cone calorimeter based on the oxygen consumption method. The non-combustibility test is from the temperature change inside the furnace during the test. The effect of the types of polymer and polymer content were evaluated from the series of test. The results are like followings. 1) The higher the W/C of PCM, the lower the gross calorific value and heat generation rate in the heat release rate test. The amount of heat generation of PCM is like the order of VVA, EVA, and SBR in this study. 2) Some materials such as E45-100, E50-100, E60-100, S50-50, and S50-100 were estimated as not appropriate building materials in the non combustibility test.

• Advances in biomechanics and applications
• /
• v.1 no.4
• /
• pp.253-267
• /
• 2014

The human head is identified as the body region most frequently involved in life-threatening injuries. Extensive research based on experimental, analytical and numerical methods has sought to quantify the response of the human head to blunt impact in an attempt to explain the likely injury process. Blunt head impact arising from vehicular collisions, sporting injuries, and falls leads to relative motion between the brain and skull and an increase in contact and shear stresses in the meningeal region, thereby leading to traumatic brain injuries. In this paper the properties and material modeling of the subarachnoid space (SAS) as it relates to Traumatic Brain Injuries (TBI) is investigated. This was accomplished using a simplified local model and a validated 3D finite element model. First the material modeling of the trabeculae in the Subarachnoid Space (SAS) was investigated and validated, then the validated material property was used in a 3D head model. In addition, the strain in the brain due to an impact was investigated. From this work it was determined that the material property of the SAS is approximately E = 1150 Pa and that the strain in the brain, and thus the severity of TBI, is proportional to the applied impact velocity and is approximately a quadratic function. This study reveals that the choice of material behavior and properties of the SAS are significant factors in determining the strain in the brain and therefore the understanding of different types of head/brain injuries.

• Steel and Composite Structures
• /
• v.31 no.4
• /
• pp.409-417
• /
• 2019

The choice of individual material for industrial application is primarily based on knowledge of its behavior in similar applications and similar environmental conditions. Contemporary design implies knowledge of material behavior and knowledge in the area of structural analysis supported by large capacity computers. Bearing this in mind, this paper presents and analyzes the experimental results related to the mechanical properties of the material considered (30CrNiMo8/1.6580/AISI 4340) at different temperatures as well as its creep and fatigue behavior. All experimental tests were carried out as uniaxial tests. The test results related to the mechanical properties are presented in the form of engineering stress-strain diagrams. The results related to the creep behavior of the material are shown in the form of creep curves, while the fatigue of the material is shown in the form of stress - life (S - N) diagram. Based on these experimental results, the values of the following properties are determined: ultimate tensile strength (${\sigma}_{m,20}=696MPa$), yield strength (${\sigma}_{0.2,20}=355.5MPa$), modulus of elasticity ($E_{,20}=217GPa$) and fatigue limit (${\sigma}_{f,20,R=-1}=280.4MPa$). Results related to fatigue tests were obtained at room temperature and stress ratio R = -1.

• Journal of Digital Convergence
• /
• v.8 no.1
• /
• pp.109-120
• /
• 2010

Mobile phone-related industries have been mainly concentrated on attracting the new customers and increasing the market share such as for the aggressive marketing activities, but it is the time to find an effective strategy to preserve existing customers since the mobile phone market had already reached the saturation. In this study, the properties of mobile phone that influence on the choice of handset and telecom company were analyzed. General properties of respondents were explored and the mobile phone properties were grouped by common factors. And analyzed the effect of factors on customer satisfaction with structural equation model. 10.4% of respondents are used their handset more than two years and 48.7% wanted to purchase other manufacturer's handset if they repurchase mobile phone. These results might come form the fact that the life cycle of mobile phone become shorter by the heating competition in mobile phone market and, to some degree, the influence of smart phone which recently become globally popular. Four factors, 'Hardware Quality', 'Practicality', 'Convergence Functions' and 'Level of Awareness', are induced from the mobile phone properties. In Structural Equation Model analysis, 'Hardware Quality' and 'Practicality' have significant and positive effects on Customer Satisfaction. But, 'Awareness' such as brand and trend appeared quite less influence on the customer satisfaction.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.2 no.4
• /
• pp.237-248
• /
• 2015

"Dynamic stabilization" systems have been developed in recent years to treat degenerative disorders of the spinal column. In contrast to arthrodesis (fusion), the aim here is to conserve intervertebral mobility to maximize comfort. When developing innovative concepts, many mechanical tests need to be carried out in order to validate the different technological solutions. The present study focuses on the B Dyn$^{(R)}$ "dynamic stabilization" device (S14$^{(R)}$ Implants, Pessac, France), the aim being to optimize the choice of polymer material used for one of the implant's components. The device allows mobility but also limit the range of movement. The stiffness of the ring remains a key design factor, which has to be optimized. Phase one consisted of static tests on the implant, as a result of which a polyurethane (PU) was selected, material no.2 of the five elastomers tested. In phase two, dynamic tests were carried out. The fatigue resistance of the B Dyn$^{(R)}$ system was tested over five million cycles with the properties of the polymer elements being measured using dynamic mechanical analysis (DMA) after every million cycles. This analysis demonstrated changes in stiffness and in the damping factor which guided the choice of elastomer for the B Dyn$^{(R)}$ implant.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.4
• /
• pp.732-741
• /
• 2014

Korean foods have the strengths to addresssome of the health problems of modern man. To assess the properties of Korean noodles, daily value %, DVS, DDS and energy density were compared between many kinds of noodles from around the world. Using a variety of reference materials, a nutritional database of noodles was built for this study. For carbohydrate, lipid, vitamin A, vitamin K, vitamin C, niacin, zinc, and copper, the daily values % of western noodles were significantly higher. Also, the serving size of Korean noodles was significantly small. Comparing the average energy density of the noodles, they showed $1.87{\pm}0.93kcal/g$ (Korean noodles), $2.42{\pm}1.08kcal/g$ (western noodles) and $1.84{\pm}0.84kcal/g$ (other noodles). The dietary fiber, polyphenols, and flavonoids content of the noodles showed no significant difference. Neither DVS nor DDS showed a statistically significant difference. In the Korean noodles, the GMDFV pattern showed a diverse choice of food groups. Korean noodles show a lower energy density, and the small serving size to have favorable for the prevention of obesity. Thus, Korean noodles are an excellent choice in terms of diversity and energy density.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.4
• /
• pp.1-5
• /
• 2015

In high temperature aircraft electronics, aluminium based brazing filler is the prime choice today. Aluminium and its alloys have compatible properties like weight minimization, thermal conductivity, heat dissipation, high temperature precipitation hardening etc. suitable for the aerospace industry. However, the selection of brazing filler for high temperature electronics requires high temperature joint strength properties which is crucial for the aerospace. Thus the selection of proper brazing alloy material, the composition and brazing method play an important role in deciding the final reliability of aircraft electronic components. The composition of these aluminium alloys dependent on the addition of the various elements in the aluminium matrix. The complex shapes of aluminium structures like enclosures, heat dissipaters, chassis for electronic circuitry, in avionics are designed from numerous individual components and joined thereafter. In various aircraft applications, the poor strength caused by the casting and shrinkage defects is undesirable. In this report the effect of various additional elements on Al based alloys and brazing fillers have been discussed.

• Membrane and Water Treatment
• /
• v.4 no.3
• /
• pp.215-222
• /
• 2013

The maximum current density that can be achieved in bipolar membrane electrodialysis is limited by the sharp increase in resistance that is experienced when the water content at the membrane interface is not adequately replenished and the membranes dry out. In this paper we show how the water content near the interface depends on the properties of the membranes. A water retaining parameter is introduced, which characterizes the thermodynamic properties of the membrane material and may be used to guide the choice of polymers for mitigation of the dry-out problem.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.429-430
• /
• 2009

The flexural strength of reinforced concrete members is strongly governed by mechanical properties of reinforcing bars, especially by yield strength, which have many uncertainties. The correct choice of probabilistic models for yield strength of reinforcement is an essential step to assure the safety and reliability of members. In this paper, a probabilistic model of yield strength of reinforcing bars is proposed based on literature and own experimental data.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.711-714
• /
• 2006

Properties of silicon nitride ($SiN_x$) film including physical and electrical characteristics have been studied for improving the stability of hydrogenated amorphous silicon thin-film transistors (a-Si TFTs) in active-matrix liquid-crystal displays (AMLCDs). The instability of a-Si:H TFTs is estimated by accelerated stress test of both bias-temperature stress and bias-illumination stress. The results show that the deposition conditions of $SiN_x$ films with higher power and lower pressure are the best choice for improving the on-current and stability of TFTs.