• Bulletin of the Korean Chemical Society
• /
• v.26 no.9
• /
• pp.1321-1330
• /
• 2005

The use of ionic liquids as reaction media can confer many advantages upon catalytic reactions over reactions in organic solvents. In ionic liquids, catalysts having polar or ionic character can easily be immobilized without additional structural modification and thus the ionic solutions containing the catalyst can easily be separated from the reagents and reaction products, and then, be reused. More interestingly, switching from an organic solvent to an ionic liquid often results in a significant improvement in catalytic performance (e.g., rate acceleration, (enantio)selectivity improvement and an increase in catalyst stability). In this review, some recent interesting results which can nicely demonstrate these positive “ionic liquid effect” on catalysis are discussed.

• BMB Reports
• /
• v.30 no.4
• /
• pp.280-284
• /
• 1997

Phenylglyoxal diethyl pyrocarbonate (DEPC), and 1-cyclohexyl-3-[2-morpholinoethyl]-carbodiimide metho-p-toluenesulfonate (CMC) are modifying reagents specific for arginine, histidine, and aspartate or glutamate, respectively. They were found to inactivate S. cerevisiae farnesyl protein transferase (FPTase). The peptide substrate protected the enzyme against inactivation by CMC and the other substrate farnesyl pyrophosphate showed protection against inactivation by phenylglyoxal. while neither of the two substrates protected the enzyme against DEPC inactivation. These results suggest the presence of aspartate/glutamate, arginine and histidine residues at the active site of this enzyme.

• Transactions of the Korean hydrogen and new energy society
• /
• v.4 no.2
• /
• pp.5-15
• /
• 1993

Hydrogen production in visible light with the following semiconductor systems, $CdS-WO_3$, $CdS-TiO_2$, have been investigated in the presence of redox catalyst (Pt, $RuO_2$). MeOH, EtOH, isopropanol, sulfide/sulfite mixture, lactic acid were used as sacrifical reagents. The optimal condition for $H_2$ evolution was found to be in qgueous lactic acid media for $CdS-WO_3/RuO_2$. The photochemical efficiency for this system was 1.05 % and the $H_2$ evolution rate was 26.5ml/min. at $6.07{\times}10^{-5}$ einstein/sec photon rate

• Transactions of the Korean hydrogen and new energy society
• /
• v.15 no.3
• /
• pp.244-249
• /
• 2004

Pd catalyst have been used in hydrogenation, oxidation, and low temperature combustion reaction. Recently, it has been candidated as a possible reagents in the partial oxidation of methanol reformers of the fuel cell. Pd catalysts, even though it is very precious and expensive, catalytic functioning is good, but it still need to be improved in the matter of durability and low catalytic activity after calcination. In this study, we synthesize the improved Pd catalyst and study their chemical functioning.

• BMB Reports
• /
• v.31 no.2
• /
• pp.139-143
• /
• 1998

The catabolic ${\alpha}-acetolactate$ synthase purified from Serratia marcescens ATCC 25419 was rapidly inactivated by the tryptophane-specific reagent, N -bromosuccinimide, and the arginine-specific reagent, phenylglyoxal. The enzyme was inactivated slowly by the cysteine-specific reagent N-ethylmaleimide. The second-order rate constants for the inactivation by N-bromosuccinimide, phenylglyoxal. and N -ethylmaleimide were $114,749M^{-1}min^{-1}$, $304.3M^{-1}min^{-1}$, and $5.1M^{-1}min^{-1}$, respectively. The reaction order with respect to N-bromosuccinimide, phenylglyoxal, and N-ethylmaleimide were 1.5,0.71, and 0.86, respectively. The inactivation of the catabolic aacetolactate synthase by these modifying reagents was protected by pyruvate. These results suggest that essential tryptophane, arginine, and cysteine residues are located at or near the active site of the catabolic ${\alpha}-acetolactate$ synthase.

• BMB Reports
• /
• v.44 no.11
• /
• pp.705-712
• /
• 2011

Advances in the fields of proteomics and genomics have necessitated the development of high-throughput screening methods (HTS) for the systematic transformation of large amounts of biological/chemical data into an organized database of knowledge. Microfluidic systems are ideally suited for high-throughput biochemical experimentation since they offer high analytical throughput, consume minute quantities of expensive biological reagents, exhibit superior sensitivity and functionality compared to traditional micro-array techniques and can be integrated within complex experimental work flows. A range of basic biochemical and molecular biological operations have been transferred to chip-based microfluidic formats over the last decade, including gene sequencing, emulsion PCR, immunoassays, electrophoresis, cell-based assays, expression cloning and macromolecule blotting. In this review, we highlight some of the recent advances in the application of microfluidics to biochemistry and molecular biology.

• Food Science and Biotechnology
• /
• v.14 no.6
• /
• pp.823-827
• /
• 2005

Fusarium mycotoxin deoxynivalenol (DON) contents and its critical quality parameters were analyzed using two-rowed, six-rowed, and hulless barleys. DON content in the two-rowed Korean barleys was lower than that in the six-rowed barleys. The average DON contents of six-rowed, two-rowed, and hulless barleys were 1.35 ppm, 0.36 ppm, and 0.49 ppm, respectively. The DON content was reduced by 6.2% by sieving, by 6.0% by washing with water and by 18.1-69.8% by treatment with aqueous chemical solutions. Of the reagents investigated, aqueous sodium bicarbonate gave the greatest reduction in the barley DON level. The DON content was reduced to 62.5% of initial level after 3 days of steeping and to 23.1% after 3 days of germination. DON was not detected after steeping barley for 24 hr in 0.1M $Na_2CO_3$ solution with 0.1 % activated carbon.

• Elastomers and Composites
• /
• v.50 no.2
• /
• pp.81-86
• /
• 2015

In this study, natural rubber latex foam was prepared in order to replace commercialized polyurethane foams as a car seat material. Physical properties of the latex foam were investigated and the light stability was improved. The latex foam was mixed in an aqueous solution state, and the degree of foaming and the accelerator ratios were appropriately controlled. Tensile properties, hysteresis and dynamic mechanical properties of the latex foam were measured to compare with those of polyurethane foams. UV light absorbers and radical scavengers were added for improving light stability of the latex foam. Xenon lamp test was conducted to investigate the effects of the reagents on light stability. Our results revealed that the prepared latex foam including a light absorber with an antioxidant showed excellent light stable performances.

• Journal of the Korean Chemical Society
• /
• v.24 no.3
• /
• pp.245-249
• /
• 1980

Uranium (Ⅵ) was extracted from dilute aqueous solutions of uranyl nitrate with acetylacetone and tri-n-butyl phosphate in n-dodecane. Synergistic effect was observed with the mixed reagents above pH 1. The species extracted are the 1:2:1 and the 1:2:2 uranyl-AA-TBP complexes. The extraction constants for these reactions have been determined.

• Hwankyungkyoyuk
• /
• v.2 no.1
• /
• pp.92-99
• /
• 1991

According to our secondary school curriculum for natural science and technical circles, there be used 353 of chemical reagents including 24 kinds of harmful and toxicant components. At present, most school are discharging their school laboratory waste water without any chemical and physical treatments. So as to solve the environmental problem for water pollution, this study tried to research a kind of adsorbant utilizing saw dust, wasted wood sources and designed the simple processing system using the adsorbent. This adsorbent was made by extracting lignin substances from raw saw dust under the solution of 0.5N-NaOH at the temperature of $100^{\circ}C$. Their metal removed rates was measured not only by processing of column and vessel. but also by comparing the standard solution and real waste water. The results were proved as more than 90(%) of the adsorptive efficiency on the average from Pb, Cd, Cu except Cr(VI)in case of the school experimental waste water soaked in vessels a long with 4g of the adsorbent for 24 hours. The new processing system enables to remove most harmful and toxicant metals by filtering, sedimenting and adsorbing at the low cost.