• 제목/요약/키워드: characteristic index

검색결과 915건 처리시간 0.026초

칼코게나이드 박막을 이용한 일차원 photonic crystal의 반사 특성 (The reflection characteristic of one-dimensional photonic crystal using by chalcogenide thin films)

  • 이정태;신경;여철호;구대성;김종빈;정홍배
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
    • /
    • pp.120-123
    • /
    • 2002
  • In this study it had an excellent optical characteristic, it followed in the creation rate and the refractive index regulation to the ease. Chalcogenide produced the $As_{45}Se_{45}Te_{10}$ thin film and the $MgF_{2}$ thin film. It measured thin film plan simulation, and the thin film has a 1 -dimensional photonic band gap. The chalcogenide $As_{45}Se_{45}Te_{10}$ thin film was measured with the fact that it has a high refractive index (2.6~2.9). The $As_{45}Se_{45}Te_{10}$ and $MgF_{2}$ thin film, have a high refractive index and a low refractive index, it used a simulation and planed period 5-pairs structure, the result was from 500nm to 800nm. It will be able to confirm the characteristic which most of the incidence light reflects, the He-Ne (632.8nm) laser was irradiated in the thin film which stabilized the thin film. $As_{45}Se_{45}Te_{10}$ (high refractive index layer: H) and $MgF_{2}$ (low refractive index layer: L) results which plans the thin film with glass/LHLHLLHLHL/air structure, 632.8nm against transmitance, increased a lot. An application possibility with the filter against a specific wave length was confirmed.

  • PDF

국내 건설회사의 안전관리수준 향상지수 및 특성 분석 (Improvement Index and Characteristic for the Safety Management Level of Domestic Construction Companies)

  • 손창백;이동은;최승모
    • 한국안전학회지
    • /
    • 제22권4호
    • /
    • pp.51-56
    • /
    • 2007
  • In order to present basic data for the balancing improvement of safety management level in domestic construction companies the improvement index and characteristic of safety management level are offered by comparing the year 2006's safety level with the year 2001's one. The companies under concern are classified into 51 large scale companies and 61 middle and small scale ones. The safety management level of both head office and construction sites is improved for all companies without regard to the scale. Specially, the improvement index of middle and small scale companies shows the higher rate than large ones and head office higher than construction sites.

항만의 해수교환 능력의 평가 지표 (Evaluation Index of Sea Water Exchange Capability of a Port)

  • 이정렬;김인호
    • 한국해양공학회지
    • /
    • 제18권6호
    • /
    • pp.22-28
    • /
    • 2004
  • A mathematical model has been developed to evaluate the capability of sea water exchanges under tidal and diffusive environments and has been verified through comparison with numerical experiments. From the mathematical analysis, this study presents the rates of sea water exchanges due to the tidal inflow and diffusion process. The port characteristic length $L_p$ is the most significant evaluation index.

Cross-index of a Graph

  • Kawauchi, Akio;Shimizu, Ayaka;Yaguchi, Yoshiro
    • Kyungpook Mathematical Journal
    • /
    • 제59권4호
    • /
    • pp.797-820
    • /
    • 2019
  • For every tree T, we introduce a topological invariant, called the T-cross-index, for connected graphs. The T-cross-index of a graph is a non-negative integer or infinity according to whether T is a tree basis of the graph or not. It is shown how this cross-index is independent of the other topological invariants of connected graphs, such as the Euler characteristic, the crossing number and the genus.

압연 공정에서 속도제어계통의 응답특성에 대한 관리지표값들의 자동산출 알고리즘 (An Automatic Computing Algorithm of Magnitude of Each Maintenance Index Regarding Response Characteristic for Speed Control System in Rolling Process)

  • 이해영;양일화;최용환
    • 조명전기설비학회논문지
    • /
    • 제17권6호
    • /
    • pp.119-126
    • /
    • 2003
  • 본 논문에서는 압연공정에서 압연용 롤을 구동하는 속도 제어 계통의 계단 응답 특성에 대한 관리지표값들을 자동으로 산출하는 알고리즘을 제안한다. 잡음이 포함된 속도 응답 데이터에서 최대값이 2개 이상 존재할 수 있는 경우들을 세 가지 독립된 유형으로 분류하였다. 각 유형별로 적절한 최대 오버슈트 후보를 선택하는 방법을 제안하였으며, 선택된 최대 오버슈트 후보가 옳은 지를 점검할 수 있는 판정 알고리즘을 개발하였다. 두 가지 유형의 시험을 통해 제안된 알고리즘으로 최대 오버슈트의 크기와 위치를 잘 검출할 수 있음을 보였다.

다변하천평가기법의 적용을 통한 부산시 도시하천 평가연구 (A Study on Urban Streams in Busan through Application of Multilateral Stream Assessment)

  • 신현석;신동수;손태석;강두기
    • 한국물환경학회지
    • /
    • 제25권2호
    • /
    • pp.235-244
    • /
    • 2009
  • The purpose of this study is to offer information about the current river conditions and basic data of streams in Busan city, by selecting 20 underground streams and evaluating their multilateral stream assessment. Concerning the evaluation of streams, 4 sections including the general index, the bank index, the river characteristic index, and the ecological environment characteristic index were evaluated. Ahead of the evaluation, the study divided Busan city into 4 zone for a systematic river investigation. Then, the study allocated code names to each river, and conducted literature research and a field survey of streams. Based on this, the study applied the evaluation of multilateral stream assessment. As a result, out of 4 entire grades, there was no grade 1 or grade 2. Instead, 35% were grade 3, 60% were grade 4, and 5% were grade 5. When looking into the evaluation results by Zone, the Dongbusan Zone showed the highest index, and the Suyeonggang Zone, the Jungbusan Zone, and the Nakdonggang Zone followed, in order.

Bootstrap Estimation for the Process Incapability Index $C_{pp}$

  • Han, Jeong-Hye;Cho, Joong-Jae;Lim, Chun-Sung
    • 한국품질경영학회:학술대회논문집
    • /
    • 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
    • /
    • pp.309-315
    • /
    • 1998
  • Process Capability can be expressed with a process index which indicates the incapability of a process to meet its specifications. This index is regarded as a process capability index(PCI) or more precisely as a process incapability index(PII). It is obtained from a simple transformation of a PCI. Greenwich and Jahr-Schaffrath(1995) considered the PII $C_{pp}$ which could be obtained from the transformation to the PCI, $C_{pm}$, and they provided the asymptotic distribution for $C_{pp}$ which was useful unless the process characteristic was normally distributed. However, some statistical inferences based on the asymptotic distribution need a large sample size. There are some processes which process engineers could not help obtaining sufficiently a large sample size. Thus, we have derived its corresponding bootstrap asymptotic distribution since bootstrapping would be a helpful technique for the PII, $C_{pp}$ which was nonparametric or free from assumptions of the distribution of the characteristic X. Moreover, we have constructed six bootstrap confidence intervals used in reducing bias of estimations based on the bootstrap asymptotic distribution and simulated their performances for $C_{pp}$,

  • PDF

화학적 특성과의 비교 분석을 통한 프랙탈 차원을 이용한 풍화도 추정 (The Estimation of the Extent of Weathering using Fractal Dimension through a Comparison with Chemical Characteristic)

  • 노수각;손영환;봉태호;박재성
    • 한국농공학회논문집
    • /
    • 제54권2호
    • /
    • pp.127-135
    • /
    • 2012
  • The processes of chemical and physical weathering occur simultaneously. The objective of this study was to estimate the degree weathered using fractal dimension through comparison with chemical characteristic of soil samples from Pohang (PH) and Kimpo (KP). Comparing chemical characteristics with fractal dimension, $SiO_2$, $Na_2O$, $K_2O$ content decreased and loss of ignition increased as fractal dimension increased. And fractal dimension showed high correlation with CWI while ATI, STI CIW, PI, CIA and RR demonstrated different degrees of correlation with fractal dimension. The tendency of the changes in oxide content and chemical weathering index with increasing fractal dimension appeared to be similar with the chemical changes due to weathering. Therefore, fractal dimension could be a good indicator representing the extent of weathering and chemical changes.

특성행렬을 이용한 비선형 집적거울 Etalon의 해석 (Analysis of a Nonlinear Integrated-Mirror Etalon by the Characteristic Matrix Method)

  • 김덕봉
    • 한국광학회지
    • /
    • 제4권3호
    • /
    • pp.317-322
    • /
    • 1993
  • 본 논문에서는 특성행렬을 사용하여 비선형 집적거울 etalon의 입출력 특성을 해석하는 방법을 제시한다. 빛의 세기에 따른 매질의 굴절률 및 흡수율의 변화 특성을 알면, 관계식과 특성행렬식을 결합하여 집적거울 etalon의 비선형 특성을 해석할 수 있다. 이 방법은 파장에 따른 각 거울의 반사율(크기와 위상)을 일일이 구하지 않고, etalon의 구조가 주어지면 바로 임의의 파장에서의 etalon의 입출력 특성을 해석할 수 있다. 또한, 특성행렬식을 이용하여 비선형 집적거울 etalon에서의 쌍안정성을 보였다.

  • PDF

밴드행열을 이용한 최적측정점선정에 관한 연구 (Optimal Measurement System Design by Using Band Matrix)

  • 송경빈;최상봉;문영현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
    • /
    • pp.133-136
    • /
    • 1987
  • This paper presents a new algorithm of optimal measurement system by using band matrix characteristic respectively for state estimation. A performance index of measurement system is established to reflect relation among measurement sets, probability of measurement failure and cost of individual meter installation. Selection ranking in the candidates of measurement sets is composed to guarantee the observability for any any single meter outage. Performance index sensitivity is introduced and recursive formula which based on the matrix inversion lemma used for selection. The proposed algorithm is composed of successive addition algorithm, successive elimination algorithm and combinatorial algorithm. The band matrix characteristic could save in memory requirements and calculate the performance index faster than earlier.

  • PDF