• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1347-1353
• /
• 2015

We implemented a 10 Gb/s 4-channel vertical cavity surface emission lasers (VCSEL) driver array in a $0.13{\mu}m$ CMOS process technology. To enhance high current resolution, power dissipation, and chip space area, digital APC/AMC with time division sensing technology is primarily adopted. The measured -3 dB frequency bandwidth is 9.2 GHz; the small signal gain is 10.5 dB; the current resolution is 0.01 mA/step, suitable for the wavelength operation up to 10 Gb/s over a wide temperature range. The proposed APC and AMC demonstrate 5 to 20 mA of bias current control and 5 to 20 mA of modulation current control. The whole chip consumes 371 mW of low power under the maximum modulation and bias currents. The active chip size is $3.71{\times}1.3mm^2$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.2 s.117
• /
• pp.227-232
• /
• 2007

In this paper, we propose Triple-band antenna, which is practicable for the transmission and the reception of the frequency band used in mobile broadcast and mobile internet. We choose T-DMB(Band-III), DAB(L-Band) for a mobile broadcast and Wibro for a mobile internet. The size of proposal antenna measures $10{\times}74{\times}0.6[mm^3]$. Although being defective in that T-DMB bandwidth is rather narrow, the antenna, considering the reception environment, has an advantage of a realistic possibility of reception in 8 channel($180{\sim}186$ MHz)and 12 channel($206{\sim}210$ MHz) of T-DMB band, being given broadcast services. Also It has gains similar characteristics of ideal dipole antenna in DAB and Wibro band.

• Journal of electromagnetic engineering and science
• /
• v.14 no.2
• /
• pp.61-67
• /
• 2014

This paper presents a zero-IF CMOS RF receiver, which supports three channel bandwidths of 5/10/40MHz for LTE-Advanced systems. The receiver operates at IMT-band of 2,500 to 2,690MHz. The simulated noise figure of the overall receiver is 1.6 dB at 7MHz (7.5 dB at 7.5 kHz). The receiver is composed of two parts: an RF front-end and a baseband circuit. In the RF front-end, a RF input signal is amplified by a low noise amplifier and $G_m$ with configurable gain steps (41/35/29/23 dB) with optimized noise and linearity performances for a wide dynamic range. The proposed baseband circuit provides a -1 dB cutoff frequency of up to 40MHz using a proposed wideband OP-amp, which has a phase margin of $77^{\circ}$ and an unit-gain bandwidth of 2.04 GHz. The proposed zero-IF CMOS RF receiver has been implemented in $0.13-{\mu}m$ CMOS technology and consumes 116 (for high gain mode)/106 (for low gain mode) mA from a 1.2 V supply voltage. The measurement of a fabricated chip for a 10-MHz 3G LTE input signal with 16-QAM shows more than 8.3 dB of minimum signal-to-noise ratio, while receiving the input channel power from -88 to -12 dBm.

• Journal of IKEEE
• /
• v.20 no.3
• /
• pp.285-290
• /
• 2016

Inter-symbol interference (ISI) due to channel bandwidth limitation constrains the maximum data rate in high speed I/O. Decision feedback equalizer (DFE) is known as the most popular technique for removing ISI. To ensure fast data transmission, not only removing ISI but also raising maximum operating frequency of the circuit itself by relaxing feedback delay margin is important. For single-ended signaling, DFE should cancel out both ISI and high frequency noises. Low-power operation is as important as fast operation because required DFE elements increase as the data rate goes up. This paper surveys recent techniques for fast DFE by removing ISI and high frequency noises, and low power DFE and discusses about their merits and limitations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.1A
• /
• pp.50-58
• /
• 2008

The use of space-division multiple access(SDMA) in the downlink of multiuser multi-input/multi-output(MIMO) wireless transmission systems can provide substantial gains in system throughput. When the channel state information(CSI) is available at the transmitter, a considerable performance improvement can be attained by adapting the transmission rates to the reported CSI. In addition, to combat frequency selective fadings in wideband wireless channels, bit-interleaved coded OFDM(BIC-OFDM) modulation schemes are employed to provide reliable packet delivery by utilizing frequency diversity through channel coding. In this paper, we propose an adaptive modulation and coding(AMC) scheme combined with an opportunistic scheduling technique for the MIMO BIC-OFDM with bandwidth-limited feedback channels. The proposed scheme enhances the link performance by exploiting both the frequency diversity and the multiuser diversity. To reduce the feedback information, the proposed AMC scheme employs rate adaptation methods based on an OFDM symbol rather than on the whole subchannels. Simulation results show that the proposed scheme exhibits a substantial performance gain with a reasonable complexity over single antenna systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.179-189
• /
• 2000

Recently, due to the increasing interests in deep sea development, all possible efforts to the development of underwater unmanned working vehicles such as AUV(Autonomous Underwater Vehicle) or underwater robot are exerted. This paper proposes a new efficient acoustic-based underwater image data communication system, which ensures a certain level of maximum throughput regardless of the propagation delay of ultrasonic and allowsfast data transmission through the multiple ultrasonic communication channel. Proposed system consists of an acoustic transducer which operates at 136kHz center frequency and it's 10kHz bandwidth, pre-amplifier, $\pi/4 QPSK$(Quadrature Phase Shift Keying) modulation/demodu-lation method, image compressing method using JPEG technique and modified Stop & Wait protocol. The experimental result of the system make it possible to transfer the underwater image as a high throughput at the basin test. The results of test are also verified which allows to desirable transmission performance compared with the existing developed system and the possibility to put the practical use of survey and investigation in the water.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6A
• /
• pp.802-812
• /
• 2000

Multihop lightwave networks are the optical-fiber based local communication systems that employ WDM(Wavelength Division Multiplexing) technology to fully use the enormous fiber bandwidth without requiring any tunable tranceives. In this paper, we introduce a novel ShuffleNet topology, asymmetric bilayered ShuffleNet(ABS) topology as a multihop WDM network technique. For 1Gb/s transmission system, we compared ABS topology with previously reported ones in terms of common network parameters such as average number of hops, throughput, time delay, and network power function. Through the analysis, the performance of ABS topology was proven to be superior to the existing ones. To decrease the amount of hardware required for implementing ABS system, we also proposed a new WDM channel sharing scheme. For (2, 3) ShuffleNet topology system, the number of wavelengths needed in the system can be reduced dramatically from 96 to 4 by using new scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.1
• /
• pp.58-65
• /
• 2016

Satellite communication is a wide area network (WAN) which provides communication service worldwide. However, the performance of TCP can be seriously degraded in the satellite networks due to limited bandwidth, long round-trip time (RTT) and high bit error rate (BER) over satellite links. In order to improve the performance of TCP, this paper proposes cross-layer Performance Enhancing Proxy (PEP) in digital video broadcasting-return channel via satellite (DVB-RCS) networks. The proposed protocol sets TCP Congestion Window (CWND) size by using satellite resource allocation information exchanged between TCP and the link-layer. we implement PEP testbed based on Linux to evaluate the performance of the proposed protocol. The simulation results show that the proposed protocol performs better than standard TCP both in single and multiple sessions in variant BER, because the proposed protocol sets TCP CWND size by using satellite resource allocation.

• The KIPS Transactions:PartD
• /
• v.14D no.7
• /
• pp.801-808
• /
• 2007

Video coding standards such as MPEG-2, MPEG-4, H.263, and H.264 transmit a compressed video data using wired/wireless communication line with limited bandwidth. Because highly compressed bit-streams is likely to fragile to error from channel noise, video is damaged by error. There have been many research works on error concealment techniques, which recover transmission errors at decoder side [1, 2]. We designed an error concealment technique for lost motion vectors of H.264 video coding. In this paper, we propose a Kalman filter based motion vector recovery scheme, and experimented with standard video sequences. The experimental results show that our scheme restores original motion vector with more precision of 0.91 - 1.12 on average over conventional H.264 decoding with no error recovery.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1818-1826
• /
• 2014

Time-variant sea surface causes a forward scattering and Doppler spreading in received signal on underwater acoustic communication system. This results in time-varying amplitude, frequency and phase variation of the received signal. In such a way the channel coherence bandwidth and fading feature also change with time. Consequently, the system performance is degraded and high-speed coherent digital communication is disrupted. In this paper, quadrature phase shift keying (QPSK) performance is examined in two different sea surface conditions. The impact of sea surface scattering on performance is analyzed on basis of the channel impulse response and temporal coherence using linear frequency modulation (LFM) signal. The impulse response and the temporal coherence of the rough sea surface condition were more unstable and less than that of the calm sea surface condition, respectively. By relating these with time variant envelope, amplitude and phase of received signal, it was found that the bit error rate (BER) of QPSK are closely related to time variation of sea surface state.