• Journal of Korean Society of Rural Planning
• /
• v.19 no.4
• /
• pp.307-317
• /
• 2013

The value and functionality of boundary barriers in rural villages have been neglected in the aspects as the buffer zone(boundary barrier) that links between the inside space(housing site) and the outside space(road). On this understanding, this study evaluated conservation value, economical efficiency and durability by the types and materials of the boundary barriers in rural village through Multi-attribute Decision Making. By applying to the current situations of boundary barriers on total 21 case study villages, each factor value was measured. And using Matrix Analysis Technique, the boundary barriers are classified into 4 types and the improvement ways for each type were proposed. As a result, the durability of boundary barriers in rural villages showed similarity value(more than 0.85 out of 1). But economical efficiency of those was low(less than 0.5 out of 1) and those functionalities were very lacking(about 0.3 out of 1). In the conclusion, the maintenance of boundary barriers in rural villages requires the policy that is able to complement conservation value and economical efficiency and is proper to the characteristic of each village. These renewable policies would contribute to the increase of the value of rural amenity as well as creation of economical and social value.

• Journal of Cadastre & Land InformatiX
• /
• v.46 no.2
• /
• pp.93-105
• /
• 2016

Among 28 land Categories, 'road' is that most frequently established or transformed. Like that of other 27 land categories, the boundary of road should be defined by boundary making principles and then fixed by cadastral laws. But, some criteria to determine the land boundary, especially in boundary making rule which can be used by geographical features, is confused partly in Land Use Planning stages. Because the purpose of making any rules in fixing road boundary may be misinterpreted, the gap between law and real land boundary can be occurred. Those related rules in determining the land boundary must be improved urgently. Cut surface' or 'slope' should be conformed as a legal term and I suggest that 'Structures' must be changed to 'geographical features'.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.382-385
• /
• 2006

A high-order spectral/boundary-element method is newly adapted as an efficient numerical tool. In this method, the velocity potential is expressed as the sum of surface potential and body potential. Then, surface potential is solved fly using the high-order spectral method and body potential is solved fly using the high-order boundary element method. Through the combination of these two methods, the wave-making problems fly a submerged sphere moving with the large amplitude oscillation are solved in time-domain. With the example calculations, nonlinear effects on free-surface profiles and hydrodynamic forces are shown and discussed.

• Journal of Science and Technology Studies
• /
• v.18 no.2
• /
• pp.307-342
• /
• 2018

This article is to discuss about a debate on controlling and handling rights of diagnostic instruments for the outbreak of Foot-and-Mouth Disease(FMD) in South Korea between 2010 and 2011. The epidemic of FMD caused catastrophic shockwave to the whole Korean society and there was fierce debate what was the best diagnostic tool for the disease and who owned the controlling power. The central government insisted to have the power of controlling the diagnostic tool to maintain the nation-centered disease control while local governments and civil organisations attempted to take over the controlling power of the diagnostic tools. In this article the concept of boundary objects which was suggested by an American STS academic, Susan Leigh Star and her colleagues. The boundary object could be the useful concept for capturing the whole process of constructing and imposing meanings and social orders in the diagnostic tool, called the portable antibody/antigen diagnostic kit. The constructing process of this boundary object must be understood with relation to boundary making activities between different social groups.

• Journal of the Korean Geographical Society
• /
• v.51 no.5
• /
• pp.577-612
• /
• 2016

The distribution of boundary markers, set up during the Yimjin(1712) Boundary Making and Demarcation(YBMD), has less been addressed so far, although it is key material evidence on which we can reconstruct the whole processes of YBMD, together with the correction of widespread myths around YBMD. This paper aims to clarify the questions on the distribution of boundary markers associated with YBMD, built during August 1712 to September 1713, by reinterpreting the key documents of Actual Survey on them: Huh Ryang and Park Dosang(1913), Kim Woosik(1883), Lee Joongha(1885), Wu Luzhen(1907), Osone Seiji(1907), and Liu Jianfeng(1908), together with topographic maps by Japanese Imperial Army(1933), the report of expedition to Mt. Baekdu by Chungjin Teachers' College(1948), and the report of field survey by Jilin province's expedition(1957). As a result, the distribution of boundary markers built in 1712~1713 is successfully reconstructed, and summarized in the format of table and maps.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.11-16
• /
• 2007

Since public awareness on the importance of sea is increasing, a number of states have ratified the United Nations Convention on the Law of the Sea. However several problems on marine boundary making are raising due to the ambiguity of law and importance of sea area. The purpose of this study is to find a logical principal through overall consideration on decision of baseline points which is a criteria of maritime boundary delimitation. Accordingly, this paper considers the current status, problems and measures for marine boundary making and then presents an alternative on it.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.3
• /
• pp.101-113
• /
• 2011

The purpose of this study are to develop a SDSS (Spatial Decision Support System) that can incorporate diverse opinions of stakeholders related the designation of protected areas (PA), and to employ the model for the readjustment of the boundary line of the Jirisan National Park of Korea. The SDSS would lead to more rational and less controversial decision-making during the expansion or removal of PA in Korea. Research methods are as follows. Firstly, to select evaluation criteria for SDSS for PA designation by using expert interview and literature survey. Secondly, to measure their preferences on the designation of additional PA or the removal of a part of PA based on the opinions of various stakeholders such as local residents, environmental groups, or public officials. Thirdly, to produce conservation priority maps based on a multi-criteria decision making technique. The SDSS would be used to rational decision making for the expansion of PA or the release of a certain part of PA by reflecting diverse preferences on biodiversity conservation and economic interest of residents. The visualization of conservation priority maps would also increase the efficiency of such decision making processes. The evaluation criteria for the expansion of PA for biodiversity conservation includes vegetation conservation value, wildlife conservation value, and the habitats of key species. The evaluation criteria for the removal of PA includes the proximity to roads and the boundary of PA, land use types, and conservation zoning of the PA. Preference weights are based on data collected from the Jirisan National Park. Both the conservation priority and removal priority maps are based on land parcels so that property rights of all parcels would be correctly represented.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.6 s.73
• /
• pp.67-74
• /
• 2006

A high-order spectral/boundary-element method is newly adapted as an efficient numerical tool. This method is one of the most efficient numerical methods by which the nonlinear gravity waves can be simulated and hydrodynamic forces also can be calculated in time-domain. In this method, the velocity potential is expressed as the sum of surface potential and body potential. Then, surface potential is solved by using the high-order spectral method and body potential is solved by using the high-order boundary element method. By the combination of these two methods, the wave-making problems by a submerged sphere oscillating with large amplitude under the free~surface are solved in time-domain. Through the example calculations, nonlinear effects on free-surface profiles and hydrodynamic forces are shown and discussed.

• Journal of Power System Engineering
• /
• v.14 no.6
• /
• pp.75-82
• /
• 2010

In this study, the topics for free-surface wave simulation, nonlinear hydrodynamic force, and the critical resonance frequency of so-called ${\tau}=U{\omega}/g$=1/4 are discussed. A high-order spectral/boundary element method is newly adapted as an efficient numerical tool. This method is one of the most efficient numerical methods by which the nonlinear gravity waves can be simulated and hydrodynamic forces also can be calculated in time domain. In this method, the velocity potential is expressed as the sum of surface potential and body potential. Then, surface potential is solved by using the high-order spectral method and body potential is solved by using the high-order boundary element method. By the combination of these two methods, the wave-making problems by a submerged sphere oscillating with forward speed under the free-surface are solved in time domain.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.698-703
• /
• 2000

In a computational fluid dynamics, the imposition of open boundary condition has an important part of the accuracy but it is not easy to find the optimal boundary rendition. This difficult is introduced by making artificial boundary in unbounded domairs. Such open boundary requires us to ensure the continuity of all primitive variables because the nature is in continuum. Here we introduce a revised well-conditioned open boundary condition particularly in FEM and apply it to various problems-entrainment, body force, short domains.