• 한국의상디자인학회지
• /
• 제23권1호
• /
• pp.143-154
• /
• 2021

This study attempted to develop winter jackets and pants patterns reflecting the latest comfortable and active school uniform trends, using middle school boy avatars having various body shapes. Jacket and pants pattern-drawing methods and margins differed. Based on the results, research prototypes were prepared. Then, virtual wear prospective drawings, clothing pressure, and appearance were assessed according to body shape. Jackets were assessed using 25 factors, while pants were assessed using 19. Then, correlations between the jackets and pants were analyzed. According to the analysis, the reason why the dart & tuck position and margin were rated low was confirmed. In a virtual wear assessment on jacket patterns by body shape, a significant difference was found in all categories, except for fit and shape at the front bottom, sleeve length on the side, and the center back line. The virtual wear assessment on the pants patterns by body shape also revealed a significant difference in all categories, except for pants length. In jackets, a significant influence was observed around the shoulders and waist in Type 1 and around the belly in Type 2. On the contrary, for pants, a significant influence was found around the hip and waist in Type 1 and around back crotch in Type 2. Therefore, they should be considered when making of jackets and pants. The above results suggested that jacket and pants patterns should vary depending on body shape. It is anticipated that there should be further studies comparing brand-name school uniforms for middle school girls and school uniforms by body shape.

• 한국의류학회지
• /
• 제22권1호
• /
• pp.80-88
• /
• 1998

To classify the bodytype at sight of front line of the body, 20 to 59 year-old 484 females were examined. 73 photographic and 16 anthropometric measurements were taken to each subject. The indices were used to obtain the shape factor of the bodytype. The principal component analysis was performed to obtain the shape factor of the front line of body and 6 factors were abstracted. The factor score was better than the measurements as the independent variable in applying the cluster analysis to classify the shape. As the result of the cluster analysis, the shape of the body at sight of the front line was classified in 4 types. It was named X, Y, A, H type. Considering the sizes, Y type was obese and H type was lean characteristically.

• 복식
• /
• 제52권6호
• /
• pp.51-69
• /
• 2002

The purpose of this study was to classify the body shapes. exclusive of size and corpulence factors of more than 60-year old elderly women by distinctions, and to investigate the visual effects of combination of ensemble suit details. For the body shape classification, the factor analysis and cluster analysis were performed : the mean value difference of numeral values for classified types were tested by ANOVA : and the follow-up test was conducted by the Duncan's multiple ranged test. The data analysis for visual effects evaluated by a multiple ranking test was analysed by mean. paired t-test, ANOVA and Duncan's multiple ranged test. The results are summarized as follows : 1. The followings are the types of body shape according to the shape factors of the front line of body for elderly women. The distinctions of the front li e of elderly women's body could be presumed; that was, Body typeⅠ was a comparatively well-balanced body type, Body type Ⅱ was close to an average body type. and Body type In was a severely corpulent body type. 2. The followings are the results on the physical visual effects inducing the constituents of clothing type. 1) The neckline·collar types of a jacket have a great influence on the visual effects of the upper body, and orderly. the tailored collar. soutien collar, and round neckline had positive influence on the visual effects in the upper body. 2) The pleat types of one-piece dress had positive influence on the visual effects in the lower body in the order of gored type, pleats type, and gathered type. Also. the balance in the lower body had more influence on the overall balance of the clothing compared to the constituents of clothing type such as neckline collar type or opening line. 3) It showed that whether there is the front opening line of a jacket influenced on the visual effects of all categories.

• 한국의상디자인학회지
• /
• 제20권3호
• /
• pp.15-26
• /
• 2018

The purpose of this study is to understand the characteristics of body types of adult woman under 155cm in height. To do this, direct measurement data showed that only 660 women aged 20~69 years old and under 155cm tall were classified, and their body type characteristics were analyzed. There are 51 body measurement items used in the analysis. The results of the study are as follows: As a result of the comparison of the body size of all adult women and women under 155cm, it was seen that short women were smaller than the all women, and were flattened with a slightly plump and bendless body. Factor analysis was performed to classify the body type of short women. Six factors including body size, body height, shoulder length and width, waist back length, hip length, and shoulder angle were measured. The results of cluster analysis, using factor scores, were classified into three types. Type 1 is taller among short women and slightly slimmer, and is an A-shape. Type 2 has the largest BMI and was the middle stature among short women It is the most obese body type and is an H-shape. Type 3 is short and plump, with a poor hip and is a Y-shape. As a result of crossover analysis, there was a difference in the body type characteristics of each age group. After all, the body type of the short adult women under 155cm was clearly different from those of all adult women, there was also a difference in the body type among short adult women.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권8호
• /
• pp.704-709
• /
• 2016

Wave energy generation systems can be divided into oscillating water chamber type, over topping device type and wave activating body type. The wave activating body type converts wave energy to kinetic energy, and the power generation amount increases as the motion of an activating body increases. In this paper, the wave energy convertor consists of a main body, which has an H-shape, and the activating body. These are connected by a bar-type bridge. By the incident wave, when the activating body moves with vertical motion this motion is consequently converted into rotational motion. The twisting moment and angular velocity at a shaft of convertor are calculated according to various conditions of the incident wave and the shape of the activating body. This can be used as a basic idea for determining the design of wave activating body type convertor.

• 패션비즈니스
• /
• 제22권2호
• /
• pp.27-39
• /
• 2018

This study analyzed the body shape of women over 70 years and classified their body shapes in order to provide basic data for the development of pants patterns that can complement the weakness of the body shape of elderly women. It were analyzed using SPSS Ver. 20.0. Five factors were extracted from the lower body: obesity and thigh thickness, lower body length, under knee thickness, ankle height, and hip sag. In type 1, the lower body was obese and the legs were thick, but the hips were not sagging. It was named 'high-hip obesity figure'. Type 2's abdomen, hip, and waist were obese, but the legs were thin and the hip were not sagging. Thus, 'bird-leg middle obesity figure' was the name. Type 3 had a long and slender lower body, but legs were thick and the hips were saggy, it was named 'strong-leg low-hip slender figure'. The elderly women showed less difference in waist, abdomen, and hip circumference. The abdominal circumference was 2-3cm more than the waist and hip circumference; hence there is a need to differentiate the shape and number of darts in the production of bottom-wear patterns for older women. In addition, the leg circumference is gradually reduced by aging compared to the size of the lower body. Therefore, it would be necessary to search for a method that can effectively design the difference between the hip circumference and the leg circumference in relation to the body shape and the aesthetics of older women.

• 한국컴퓨터정보학회논문지
• /
• 제24권3호
• /
• pp.113-122
• /
• 2019

In this study, I analyzed the measurement data of the early 20s male who are emphasizing the importance of good clothes in the fashion of body-contact clothes. Through this, I tried to provide basic data necessary for making clothing for early 20s male. Using data from Size Korea's 7th Human Body Survey, 588 people aged 20-25 years were analyzed and classified into four types. Type 1 have a thick and short body, narrow ankle and calf, thin legs. And the hip is not sagged, and height is a little short. So I named it 'short & thick body with bird legs'. Type 2 have a broad shoulder, slim and long body, and no sagging shoulders. So I named it 'slim inverted triangular figure'. Type 3 have a small height, thin and short body, and a thick ankle and calf. So I named it 'short & thin body with thick legs'. Type 4 have a tall height, narrow shoulder, and sagging hip and shoulders. So I named it 'Long triangle'. In order to improve fit of body-contact clothes reflecting the trend of men's wear in recent years, it is necessary to develop clothing prototypes by body type. 20s have the most ideal body shape after completion of growth, but differences in the length, thickness, and thickness of the trunk. This is reflected in the apparel pattern system, and it can be expected to increase consumers' satisfaction if they are used to make excellent ready-to-wear patterns.

• 한국컴퓨터정보학회논문지
• /
• 제23권4호
• /
• pp.121-129
• /
• 2018

The purpose of this study is to provide a basic data of clothing development which can improve the satisfaction of the body shape by examining the subjective evaluation and type characteristics of the old-old women themselves. Q methodology was used for the study of subjectivity. The types of the body shape of the old-old women were analyzed as five types: bent body with protruding abdomen, backward bent body with slender legs, inverted triangle, swollen cylinder, triangle. The bent body with protruding abdomen had a bent back and waist. They were recognized that the bust and shoulders were sagging and abdomen was protruding. The backward bent body with slender legs was the smallest of the five types with a BMI index and shoulders and bust were sagging. And knee and waist were bent and legs were thin. The inverted triangular shape showed the highest BMI index among the 5 types, indicating that it is obese. They thought that the upper body was developed and the lower body and legs were slender. The swollen cylinder shape was analyzed to be the smallest and the most fat body. The triangle shape had developed lower body and bent back and waist. It is considered that a design consideration is needed to cover the disadvantages of the body shape in consideration of not only wearing feeling but also aesthetic part when making clothes. By making ergonomic garments considering the characteristics of body shape, it can be expected to change the body shape due to the wearing of clothing that is not suitable for body shape and the effect on physical health in a positive direction.

• 한국의상디자인학회지
• /
• 제21권2호
• /
• pp.95-108
• /
• 2019

This study aims to determine the characteristics of new senior women's torso shapes. The data was collected from the 7th Size Korea, which analyzed 412 women between the ages of 55-69. A factor analysis was performed based on 20 indices, including eight based on circumference, eight based on height and length measurements, and four based on torso flattening. The results of the factor analysis suggest five main factors: torso silhouette, longitudinal size of the body, torso flattening rate, abdominal shape, and posterior longitudinal size. The results of the cluster analysis suggest three overall types: Type 1 is the inverted triangular obese shape which is characterized by large breasts, small buttocks, a short height, and a forward-bending posture; Type 2 is the rectangular, slim shape which is characterized by a forward neck and a flat front and back of the torso, and is the most slender among the three types; Type 3 is the large rectangular, overall obese shape, which is characterized by a round shape with large breasts, waist, and buttocks, and a forward-bending posture with a protruding back, and this is the most obese type. According to the results of the cross-tabulation, women aged 55-59 showed no trend in body shape; women aged 60-64 showed an increases in the inverted triangular obese shape and the large rectangular, overall obese shape; women aged 65-69 showed an increase in the large rectangular, overall obese shape and a decrease in the rectangular slim shape. In summary, new senior women showed body shape characteristics of being short, more obese having, a bent over posture. As they grew older, the curves disappeared, and the body becomes rounder. The study found that variation in body shape exists among new senior women in the aged society.

• 한국의류산업학회지
• /
• 제20권2호
• /
• pp.219-225
• /
• 2018

The purpose of this study is to make an ideal dummy for adult Maltese with proper investigation of its character and direct measurement of dog body-shape. The results of the study are as follows; First, there were 6 factors to affect the characteristics of Maltese body in the analysis, which are size of body, leg shape, chest shape, leg thickness, body length, length between fore-legs. In the cluster analysis with the 6 factors there were two types of Maltese body. Type 1 has body characteristics with large body, thick leg, and small distance between front legs. Type 2 has average size of all factors including body size, leg thickness, and length between fore-legs. Second, type 2 was selected as a representative one to make a dummy reflected body shape of characteristics because it took 67.71% from entire considered factors and has average value in the measured size. The first dummy pattern was planned by copying the surface area of the representative body shape with the method of surgical tape. A dummy of single body with trunk and legs was made using 30's cotton cloth, polyester inside batting, compressed form PVC and metallic wire on the joint of trunk and legs to support dummy shape. The second pattern was made by correcting size difference of the pattern and adding the pattern of neck covering plate, metal magnetic button was inserted on the center of joint area of trunk and legs to make detachable legs for easy slip on and off the pet's wear.