• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.607-612
• /
• 1992

For hydroforming process, determination of back-up fluid pressure in chamber is one of the most essential tasks. In this paper, we present a back-up pressure estimation system which estimates the back-up pressure of hydroforming process utilizing a multi-layered neural network. The neural network learns the nonlinear relation ship between the back-up pressure and the geometric state variables of hydroforming process. The proposed method does not necessitate sophisticated analysis on hydroforming process but some geometric intuition. The experimental results show that the neural network well approximates the nonlinear relationship between the back-up pressure and the geometric state variables of hydroforming process, thus giving the good estimation of back-up pressure vs punch stroke curve.

• Transactions of Materials Processing
• /
• v.21 no.5
• /
• pp.291-297
• /
• 2012

In this paper, the effect of back tension in multi-pass drawing or wiredrawing on the central bursting defect is investigated using finite element predictions. A rigid-plastic finite element method was used together with the McClintock damage model. Central bursting defects under different back tension stress values ranging from 0% to 20% of the yield strength of the material were predicted and they were compared to understand the effect of the back tension stress values on the central bursting defect. It is found that the level of back tension has a strong influence on the cumulative damage. Thus, higher back tension raises the possibility of the central bursting defect occurring, even though it decreases the interfacial pressure between the die and the work piece.

• ETRI Journal
• /
• v.41 no.1
• /
• pp.124-132
• /
• 2019

The energy balance (EB) model of a primary side regulation (PSR) fly-back converter in the discontinuous conduction mode (DCM) is discussed in this paper. Based on this EB model, the stability of a PSR fly-back converter in the pulse skipping mode (PSM) is analyzed, and a self-adapting modulation factor control strategy is proposed. Theoretical analysis and simulation results show that by saving an optocoupler and correlative circuits, which are necessary in traditional PSM fly-back converters, the modulation factor tolerance controlled by this method is 1.26% on average, corresponding to the ideal value. Compared with traditional fly-back PSM controllers, the power saved in the sampler/comparator modules is 87% on average for a load range of $1{\Omega}$ to $1k{\Omega}$.

• Journal of the Korean Society of Costume
• /
• v.42
• /
• pp.163-172
• /
• 1999

The purpose of this study is to classify the types of torso of adult females using the tight fitting technique and pattern development figure. The subjects are 106 females of 19 to 24 years old. 59 different items are measured from body surface development and analyzed by factor analysis and cluster analysis. The results are as follows; 1. Eight somatotype factors are obtained through factor analysis and orthogonal rotation by the method of Varimax Factor 1 is the length of upper body factor 2 the length of lower body factor 3 the circumference and width of the back of upper body factor 4 the circumference and width of front torso factor 5 the dart type of the back of upper body factor 6 the size of the back neck factor 7 the type of the front shoulder and factor 8 the size of the back arm hole. 2. As a result of cluster analysis the somatotype of torso is classified into 5 types. Type 1 is normal in length circumference and width of upper body. Type 2 is shortest length circumference and width of torso. Type 3 is long in length circumference and width of torso. Type 4 is normal length and short in circumference and width especially short in bust circumference. Type 5 is longest in length circumference and width of torso.

• Journal of muscle and joint health
• /
• v.15 no.2
• /
• pp.175-182
• /
• 2008

Purpose: The purpose of the study was to identify low pain prevalence rate and factors affecting low back pain in emergency medical technicians. Method: A descriptive relationship research design was utilized. The participants were 74 emergency medical technicians who worked at fire stations in W and J city and agreed to participate in this study. Data were collected between April and August 2008 using a questionnaire, which included demographic factors, severity of low back pain using a visual analog scale, factors related to low back pain and health behavior, and BMI. Descriptive statistics and multiple regression were performed for data analysis. Results: 85.1% of emergency medical technicians experienced low back pain. The mean score of low back pain was relatively low (M=4.0, SD=2.33). Significant factors affecting low back pain were found to be age, marital status, exercise, hours of standing work, and BMI. These variables explained 35.1% of variance in low back pain (F=8.45, p<.001). Conclusion: These results suggest that further research is needed to develop interventions for prevention and management of low back pain among emergency medical technicians.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.11
• /
• pp.1519-1525
• /
• 2014

This paper presents the shape design for reducing cogging torque and characteristic analysis in Brushless DC (BLDC) motor. In this BLDC motor, ${\Delta}$(delta)-winding is applied, and in order to obtain the $60^{\circ}$ trapezoidal phase back-EMF waveform, permanent magnet shape design is carried out. And then, a method on specifying design parameters to effectively reduce cogging torque is developed. back-EMF, input voltage and input current which are analyzed by the Finite Element Method (FEM) are validated by experimental results. Also, efficiency calculations based on analysis and experimental results are performed and analyzed.

• Journal of Magnetics
• /
• v.18 no.2
• /
• pp.95-104
• /
• 2013

This paper presents a general analytical method for predicting the magnetic fields of different Halbach magnet arrays with or without back iron mounted on slotless permanent magnet (PM) linear machines. By using Fourier decomposition, the magnetization components of four typical Halbach magnet arrays are determined. By applying special synthetic boundary conditions on the PM surfaces, the expressions of their magnetic field distributions are derived based on the magnetic scalar potential (MSP), which are simpler than those based on the magnetic vector potential (MVP). The correctness of the method is validated by finite element analysis. The harmonics of airgap flux density waveforms of these Halbach magnet arrays with or without back iron are also compared and optimized.

• Journal of the Korean Home Economics Association
• /
• v.35 no.4
• /
• pp.79-94
• /
• 1997

This study was performed to develop a basic stacks pattern for middle-aged women reflecting the characteristics of their lower body types. Anthropometric measurements using sliding guage method were carried out for 4 women 40's For the analysis of the lower body types horizontal and vertical section maps obtained by sliding gauge method and 2 indices were produced. Based on the slacks construction components produced by the drafts of their lower body surface experimental slacks pattern was designed. Multiple comparison test was used to compare 3 existing slacks patterns with the experimental pattern. 1. The results of the body section map analysis were as follows: 1) In the frontal view silhouette of vertical section maps there were less individual differences in items with skeleton landmarks than those without them. 2) In the shape of horizontal section maps waist section represented more round shape than the others and thigh maximum width section had the flattest shape. Flat ratios(depth/width) of subjects were much higer than those of young women which clarified the change of depth was bigger than that of width with aging process. 2. The slacks construction components for pattern drafting were as follows: 1)Ease amount of waist was 0.5cm and front and back waist girth difference was 1.2cm Ease amount of hip was 1,8cm and front and back hip girth difference was 0.7 cm 2) The amount of dart intake incresed in the order of side(4cm) back(3,6cm) from (2.8cm) The length of dart leg incresed in the order of front side back.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.4
• /
• pp.45-54
• /
• 2014

The main purpose of this study is to provide the back-from-city farmers with the information about the melon cultivation technology by surveying 268 farm houses in the major melon producing districts such as Seongju and Chilgok. For the purpose, this study classifies the essential technologies that the melon experts think as most important into 6 categories: size of plastic film house, covering film, varieties of oriental melon, lagging cover, ventilation method and ways to reduce repeated-cultivation damage. The result of the study shows that the back-from-city farmers should consider the following items when they choose to cultivate oriental melons. For the size of plastic film house, the ventilation method and the covering film of plastic film house, it is better to choose the latest technology. Even though it may require larger initial investment, the latest technology can increase the production and lower the cost. In case of variety, it is better to choose popular or the most widely grown ones rather than the new ones. The lagging cover should be selected in consideration of climate conditions such as average temperature and humidity, transplant time and harvest time of the farming region.

• Physical Therapy Korea
• /
• v.21 no.4
• /
• pp.40-48
• /
• 2014

Differential item functioning (DIF) based on Rasch model can be used to examine whether the items function similarly across different groups and identify items that appear to be too easy or difficult after controlling for the ability levels of the compared groups. The Oswestry low back pain disability (Oswestry) has traditionally been proved as an effective instrument measuring disability resulting from low back pain (LBP). In this study, DIF method was used to explore whether items on the Oswestry perform similarly across two different groups (participants with LBP and no LBP). A series of Rasch analyses on the 10 items of the Oswestry were performed using Winsteps$^{(R)}$ software. Forty-two participants with back pain were recruited from 3 rehabilitation hospitals in Gainesville, Florida. Another 42 participants with no LBP were recruited from several public places in the rehabilitation hospitals. Based on the DIF analysis across the two groups, several items were found to have an uniform DIF. Participants with no LBP had more difficulty on lifting and personal care items and participants with LBP had more difficulty on sleeping and social life items. For non-LBP group, a high ceiling effects (83% of participants with non-LBP) was detected, which was not be able to be effectively measured with the Oswestry items. Although 4 items of the Oswestry function differently across the two groups, all items of the Oswestry were well targeted the LBP group.