• International Journal of Control, Automation, and Systems
• /
• v.5 no.2
• /
• pp.128-137
• /
• 2007

A robust adaptive controller design for a class of Markovian jump parametric -strict-feedback systems is given. The disturbances considered herein include both uncertain nonlinearities and Wiener noises of unknown covariance. And they satisfy some bound-conditions. By using stochastic Lyapunov method in Markovian jump systems, a switching robust adaptive controller was obtained that guarantees global uniform ultimate boundedness of the closed-loop jump system.

• Journal of the Korean Vacuum Society
• /
• v.12 no.4
• /
• pp.207-213
• /
• 2003

We have developed the hardware and software for automation of the national medium vacuum standard. The automation is necessary to control and monitor the complex system consists of several vacuum chambers, pumping systems, vacuum gauges, thermometers, and valves. By using the automation program, we have measured volume ratios of the system and performed calibration of a capacitance diaphragm gauge in order to evaluate the system.

• Journal of Power Electronics
• /
• v.19 no.5
• /
• pp.1193-1202
• /
• 2019

A SMPMSM drive system is a typical nonlinear system with time-varying parameters and unmodeled dynamics. The speed outer loop and current inner loop control structures are coupled and coexist with various disturbances, which makes the speed control of SMPMSM drive systems challenging. First, an ultra-local model of a PMSM driving system is established online based on the algebraic estimation method of model-free control. Second, based on the backstepping control framework, model-free adaptive integral backstepping (MF-AIB) control is proposed. This scheme is applied to the permanent magnet synchronous motor (PMSM) drive system of an electric vehicle for the first time. The validity of the proposed control scheme is verified by system simulations and experimental results obtained from a SMPMSM drive system bench test.

• Journal of the Korean Society of Systems Engineering
• /
• v.18 no.2
• /
• pp.126-139
• /
• 2022

The need for synthetic automation is increasing in preparation for a gradual decrease in laboratory research manpower due to low birth rate and aging. In this study, the existing laboratory synthesis method is analyzed based on the systems engineering technique. Then, it led to the derivation of the system requirements for a fixed-based robot manipulator capable of recognition, decision and control. The robot is equipped with replaceable modular end-effectors and designed depending on the purpose and process of the synthesis. The robot with an end-effector was implemented as PoC(Proof-of-Concept), and the functions for pipetting automation was verified.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.1
• /
• pp.138-144
• /
• 2013

The automation technology for overlay welding is needed due to the occurrence of severe corrosion and abrasion on the surface of internal contact in different shape of fittings. In Korea, different shapes of fittings have been manufactured by using the imported equipment of overlay welding automation at some companies. Thus the research on the development of overlay welding automation system (in short, OWAS) for a large L-type tube is urgently needed. In this paper, the investigation is focused on the optimal design of a supporting base for the (currently developing) OWAS of large L-type tube. Specifically we assume that the base which supports the equipment during the process of overlay welding is loaded as self-weight in the direction of gravity through static analysis especially when it is rotated 180 degree on the OWAS. For optimal design of a supporting base for OWAS of large L-type tube, Solidworks(R) (for 3-dimensional modelling) and ANASYS Workbench(R) (for structural analysis) are incorporated so as to proceed an optimization routines based on Response Surface Method (RSM) and Design of Experiment (DOE). In more specific, DOE finds out major factors (or dimensions) of the supporting base by using MINITAB(R). Then the regression equations between design variables (the major factors of supporting base) and response variables (deformation, stress and safety factor for the supporting base), which will be resulted in by RSM, verify the major factors of DOE. In the next step, Central Composite Design (CCD) plans 20 simulations of ANASYS Workbench(R) and then figures out the optimal values of design variables which will be reflected on the manufacturing of supporting base. Finally welding experiment is conducted to figure out the influence of overlay welding quality in applying the optimized design values of supporting base to the actual OWAS.

• Journal of Power Electronics
• /
• v.15 no.2
• /
• pp.455-468
• /
• 2015

A microgrid (MG) with integrated renewable energy resources can benefit both utility companies and customers. As a result, they are attracting a great deal of attention. The control of a MG is very important for the stable operation of a MG. The droop-control method is popular since it avoids circulating currents among the converters without using any critical communication between them. Traditional droop control methods have the drawback of an inherent trade-off between power sharing and voltage and frequency regulation. An adaptive droop control method is proposed, which can operate in both the island mode and the grid-connected mode. It can also ensure smooth switching between these two modes. Furthermore, the voltage and frequency of a MG can be restored by using the proposed droop controller. Meanwhile, the active power can be dispatched appropriately in both operating modes based on the capacity or running cost of the Distributed Generators (DGs). The global information (such as the average voltage and output active power of the MG and so on) required by the proposed droop control method to restore the voltage and frequency deviations can be acquired distributedly based on the Multi Agent System (MAS). Simulation studies in PSCAD demonstrate the effectiveness of the proposed control method.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.1
• /
• pp.41-50
• /
• 2023

Recently, as the Coronavirus disease 2019 (COVID-19) prolongs along with the development of artificial intelligence technology, a non-contact society has become commonplace. Many companies are promoting digital transformation and the activation of artificial intelligence introduction to respond to this which leads to dramatic increase of demand for Chatbot. In addition, a Chatbot has reached the point of processing business transactions from responding simple inquiries. However, it is necessary to develop an API to interface with the legacy system and there are many difficulties in connecting. To solve this, it is becoming important to establish a hybrid Chatbot environment through RPA interface. Recently, the combination of RPA and Chatbot is considered an effective tool for handling many business processes. But, there are many difficulties due to the lack of interface cases and the difficulty in finding a method to development them. This study suggests a method for building a hybrid Chatbot which is an interface Chatbot(Conversational UX) and RPA(Task Automation) from the perspective of hyper-automation based on actual development cases and review of literature review is presented, so that the interface method can be understood and develop more easily. Therefore, there are implications for actively using AI Chatbot for digital transformation.

• Wind and Structures
• /
• v.36 no.2
• /
• pp.121-131
• /
• 2023

Aiming at the problem that fatigue characteristics of metal roof rely on local physical tests and lacks the cyclic load sequence matching with regional climate, this paper proposed a method of constructing the fatigue load spectrum based on integration of wind load model, measured data of long-span metal roof and climate statistical data. According to the turbulence characteristics of wind, the wind load model is established from the aspects of turbulence intensity, power spectral density and wind pressure coefficient. Considering the influence of roof configuration on wind pressure distribution, the parameters are modified through fusing the measured data with least squares method to approximate the actual wind pressure load of the roof system. Furthermore, with regards to the wind climate characteristics of building location, Weibull model is adopted to analyze the regional meteorological data to obtain the probability density distribution of wind velocity used for calculating wind load, so as to establish the cyclic wind load sequence with the attributes of regional climate and building configuration. Finally, taking a workshop's metal roof as an example, the wind load spectrum is constructed according to this method, and the fatigue simulation and residual life prediction are implemented based on the experimental data. The forecasting result is lightly higher than the design standards, consistent with general principles of its conservative safety design scale, which shows that the presented method is validated for the fatigue characteristics study and health assessment of metal roof.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.6
• /
• pp.707-711
• /
• 2007

An observer-based fault tolerant control (FTC) method is proposed for constrained switched systems (CSS) with input constraints. A family of Lyapunov-based bounded controllers are designed to ensure that, whenever actuator faults occur at the dwell time period of each continuous mode, the mode is always within its corresponding stability region. A set of switching laws are designed to guarantee the asymptotic stability of the overall CSS. The fixed stability regions on which the FTC method is based are also relaxed by the proposed variable stability regions. An example of CPU processing illustrates the effectiveness of proposed method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.779-787
• /
• 2003

Recently, a study on the development of remote monitoring and automation control system based on Web is spread widely. In this paper, we have expended the remote control method on the existing automation. And we proposed method to do real-time monitoring and remote control considering multimedia data processing, the expansion of TCP/IP using LabView graphical language. Also we applied the method in greenhouse environment control system. The application result was evaluated by very efficient thing to remotely monitor and control situation of greenhouse.