• Transactions on Control, Automation and Systems Engineering
• /
• v.2 no.4
• /
• pp.248-254
• /
• 2000

This paper presents and output feedback fuzzy H(sup)$\infty$ control problem for a class of nonlinear systems with time-varying delayed state. The Takagi-Sugeno fuzzy model is employed to represent a nonlinear systems with time-varying delayed state. Using a single quadratic Lyapunov function, the globally exponential stability and disturance attenuation of the closed-loop fuzzy control system are discussed. Sufficient conditions for the existence of fuzzy H(sup)$\infty$ controllers are given in terms of matrix inequalities. Constructive algorithm for design of fuzzy H(sup)$\infty$ controller is also developed. A simulation example is given to illustrate the performance of the proposed design method.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.397-400
• /
• 1999

As the result of enhancement of CAD, Design Automation and manufacturing technology, it's on the increasing complexity, integration ratio, data signals, and pin count to IC chips. This brings about difficulties of testing, and incresing test time. Now One of the most cost-consuming procedure as integration ratio increases is the testing step. In this paper, we propose a new method, “Efficient TP(test point) assignment algorithm” using “input grouping”, This is helpful method to reducing test length without losing fault coverage. Experimental results show that proposed method reduces test length remarkably and doesn't miss fault coverage, with low hardware overhead Increasing.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.8
• /
• pp.942-950
• /
• 2011

Automation is important in modern agricultural environment, which demands the highest level of technology. In the paper an independent four-wheel steering driving platform is developed especially for horticulture in glass house farm. Mathematical modeling of the four wheel system is carried out for smooth movement. The relationships between steering angle, the turning radius, and escape trajectory are simulated using the dynamic analysis program. Optimal driving algorithm is sought through the performance evaluation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.717-720
• /
• 2000

Burr makes troubles on manufacturing process due to of deburring cost, quality of products and automation. This paper described the results of experimental study on the influence of the cutting parameters on the formation of exit burrs in face milling. Using the results of experimental study, we classified the burr type and developed data bases to predict burr formation result. This program will be used to predict burr type and geometry at a specified location. Simulation results on deformation strain and temperature are also available. Also algorithm which calculate the exit angle is proposed.

• Journal of the Korean Society for Precision Engineering
• /
• v.6 no.3
• /
• pp.109-119
• /
• 1989

This paper discusses the system layout of flexible manufacturing system. A definition of flexible manufacturing system has not been necessarily classified yet. An understanding, and an objective of its application are different in a variety of industries. It could be treated as the system adopting flexble-Automation and FMS has been improving as a form of parts maching system. It was thought that the problems of machining function and transfer function were important. This paper introduces parts family and machine groups to increase machining function and transfer function. Parts family and machine tool groups were made up by means of multidimensional dizitizing analysis. A new software algorithm for forming parts family and machine groups has been proposed. Flexible manufacturing system was layout according to the FMS transfer function classification.

• Transactions on Control, Automation and Systems Engineering
• /
• v.4 no.4
• /
• pp.305-310
• /
• 2002

The measured rate of the tracking sensor becomes biased under some operational situation. For a highly maneuverable aircraft in 3D space, the target dynamics changes from time to time, and the Kalman filter using position measurement only can not be used effectively to reject the rate measurement bias error. To cope with this problem, we present a new algorithm which incorporate FIR-type filter and FIR-type fixed-lag smoother, and demonstrate that it has the optimal performance in terms of both estimation accuracy and response time through an application example to the anti-aircraft gun fire control system(AAGFCS).

• Transactions on Control, Automation and Systems Engineering
• /
• v.4 no.4
• /
• pp.253-263
• /
• 2002

This paper presents an adaptive feedback linearization control scheme for induction motors using stator fluxes. By using stator flukes as states, overparameterization is prevented and control inputs can be determined straightforwardly unlike in existing schemes. This approach leads to the decrease of the relative degree for the flux modulus and thus yields a simpler control algorithm than the prior results. In this paper. adaptation schemes are suggested to compensate for the variations of stator resistance. rotor resistance and load torque. In particular, the adaptation to the variation of stator resistance with a feedback linearization control is a new trial. In addition, to improve the convergence of rotor resistance estimation, the differences between stator currents and its estimates are used for the parameter adaptation. The simulations show that torque and flux are controlled independently and that the estimates of stator resistance, rotor resistance, and load torque converge to their true values. Actual experiments on a 3.7㎾ induction motor verify the effectiveness of the proposed method.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.2
• /
• pp.138-146
• /
• 2007

The analysis and design method for achieving robust stabilization of Decentralized Dynamic Surface Control (DDSC) is presented for a class of interconnected nonlinear systems. While a centralized design approach of DSC was developed in [1], the decentralized approach to deal with large-scale interconnected systems is proposed under the assumption that interconnected functions among subsystems are unknown but bounded. To provide a closed-loop form with provable stability properties, augmented error dynamics for N nonlinear subsystems with DDSC are derived. Then, the reachable set for errors of the closed-loop systems will be approximated numerically in the form of an ellipsoid in the framework of convex optimization. Finally, a numerical algorithm to calculate the $L_2$ gain of the augmented error dynamics is presented.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.3
• /
• pp.401-412
• /
• 2008

This paper discusses a design methodology of cooperative path planning for dynamical multi-agent systems with spatial and temporal constraints. The cooperative behavior of the multi-agent systems is specified in terms of the objective function in an optimization formulation. The path of achieving cooperative tasks is then generated by the optimization formulation constructed based on a differential flatness approach. Three scenarios of multi-agent tasking are proposed at the cooperative task planning framework. Given agent dynamics, both spatial and temporal constraints are considered in the path planning. The path planning algorithm first finds trajectory curves in a lower-dimensional space and then parameterizes the curves by a set of B-spline representations. The coefficients of the B-spline curves are further solved by a sequential quadratic programming solver to achieve the optimization objective and satisfy these constraints. Finally, several illustrative examples of cooperative path/task planning are presented.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.3
• /
• pp.434-443
• /
• 2008

This paper develops a novel automatic parking algorithm based on a fuzzy logic controller with the vehicle pose for the input and the steering rate for the output. It localizes the vehicle by using only external sensors - a vision sensor and ultrasonic sensors. Then it automatically learns an optimal fuzzy if-then rule set from the training data, using an evolutionary fuzzy system. Furthermore, it also finds the green zone for the ready-to-reverse position in which parking is possible just by reversing. It has been tested on a 4-wheeled Pioneer mobile robot which emulates the real vehicle.