• 대한기계학회논문집
• /
• 제18권7호
• /
• pp.1783-1788
• /
• 1994

A comparison of the temperature distributions along the wall and center of the fin and the heat loss from the fin, computed assuming the fin tip is insulated and assuming it is not insulated in a triangular fin, is performed by the two-dimensional forced analytic method. When the fin tip is not insulated, a comparison between forced analytic method and analytic method is made in the heat loss and temperature along the fin wall. The value of Biot number varies from 0.01 to 1.0. The root temperature and surrounding convection coefficients of the fin are assumed as a constant. The results are (1) the analysis on the triangular fin assuming the fin tip is insulated does not produce a good value as compared to that of not-insulated case as the non-dimensional fin length decreases and as the value of Biot number increases and (2) the errors between forced analytic method and analytic method are very small, but the former method is better for computer running time and accuracy.

• 호남수학학술지
• /
• 제37권4호
• /
• pp.411-421
• /
• 2015

This paper investigates the issue of analytic travelling wave solutions for some important coupled models of fractional order. Analytic travelling wave solutions of the considered model are found by means of the Q-function method. The results give us that the Q-function method is very simple, reliable and effective for searching analytic exact solutions of complex nonlinear partial differential equations.

• Journal of Welding and Joining
• /
• 제8권2호
• /
• pp.53-57
• /
• 1990

Analytic solutions of heat conduction during welding which were first found by Resenthal have some restrictions. One of these is that models to which analytic solutions can be applied must have simple geometric shape, and another is that quasi-stationary state must be created. On the other hand, computational methods developed recently with the aid of the computer can overcome these shortcomings, but the methods raise problems from economic point of view when they are applied to 3 dimensional problems. Taking account of these problems, a new method combinig the analytic method with the computational one is proposed. This method can be ued in weldments with complicated geometric shape in non-stationary state, but with the aid of the analytic method can reduce the computing time.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제9권1호
• /
• pp.91-98
• /
• 2005

The straight rectangular fin is analyzed using the one-dimensional analytic method and the finite difference method. For the finite difference method, the numbers of nodes vary from 20 to 100. The relative errors of heat loss and temperature between the analytic method and the finite difference method are represented as a function of Biot Number and dimensionless fin length. One of the results shows that the relative error between the analytic method and the finite difference method decreases as the numbers of nodes for finite difference method increase.

• 한국전산유체공학회지
• /
• 제10권3호
• /
• pp.63-69
• /
• 2005

The COMS, the first meteorological geostationary satellite in Korea, is under development by KARI. The radiator size and the heater power for the thermal control of COMS are calculated using an analytic method. The total radiator area of $4.85\;m^2$ and the total heater power of 794.77 W are determined at a conceptual design of COMS. The commercial software, SINDA and TRASYS, are utilized in order to compare and verify the analytic results. The results of on-orbit numerical simulation of cold and hot cases show that the radiator size and heater power obtained from the analytic method are appropriate to maintain COMS equipments within required temperature ranges.

• 전기학회논문지P
• /
• 제66권1호
• /
• pp.1-6
• /
• 2017

Recently, many motor analysis methods have been developed and studied. Among these methods, the finite element method(FEM) and the analytic method are most popular in field engineers because of the accuracy of FEM and the convenience and rapid analysis time of the analytic method. Contrary, the finite element method has a weakness in calculation time and it is not easy to obtain the instantaneous characteristics value of motor with the analytic method. In this paper, the authors proposes a novel method for calculating the instantaneous characteristics of motors with the magnetic slot equivalent circuit.

• 한국수학사학회지
• /
• 제27권4호
• /
• pp.271-283
• /
• 2014

This study takes a look at Polya's analysis on Archimedes' "The Method" from a math-historical perspective. We, based on the elaboration of Polya's analysis, investigate the analytic geometric characteristics of Archimedes' "The Method" and discuss the way of using the characteristics in education of school calculus. So this study brings up the educational need of approach of teaching the definite integral by clearly disclosing the transition from length, area, volume etc into the length as an area function under a curve. And this study suggests the approach of teaching both merit and deficiency of the indivisibles method, and the educational necessity of making students realizing that the strength of analytic geometry lies in overcoming deficiency of the indivisibles method by dealing with the relation of variation and rate of change by means of algebraic expression and graph.

• The Journal of the Acoustical Society of Korea
• /
• 제17권3E호
• /
• pp.35-42
• /
• 1998

Transient acoustic and elastic wave propagation in inhomogeneous media are studied by using the Fourier method. It is known that the fourier method has advantages in memory requirements and computing speed over conventional methods such as FDM and FEM, because the Fourier method needs less grid points for achieving the same accuracy. To verify the proposed numerical scheme, several examples having analytic solutions are considered, where two different semi-infinite media are in contact along a plane boundary. The comparisons of numerical results by the Fourier method and analytic solutions show good agreements. In addition, the fourier method is applied to a layered half-plane, in which an elastic semi-infinite medium is covered by an elastic layer of finite thickness. It is showed how to derive the analytic solutions by using the Cagniard-de Hoop method. The numerical solutions are in excellent agreements with analytic results.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2000년도 춘계학술대회 논문집
• /
• pp.57-66
• /
• 2000

Production-distribution planning is the most important part in supply chain management (SCM). To solve this planning problem, either analytic or simulation approach has been developed. However these two approaches have their own demerits in problem solving. In this paper, we propose a hybrid approach which is a specific problem solving procedure combining analytic and simulation method to solve production-distribution problems in supply chain. The machine capacity and distribution capacity constraints in the analytic model are considered as stochastic factors and adjusted by the proposed specific process according to the results from independently developed simulation model which includes general production-distribution characteristics.

• Journal of Mechanical Science and Technology
• /
• 제20권12호
• /
• pp.2203-2208
• /
• 2006

Both 1-D and 2-D analytic methods are used for a rectangular fin optimization. Optimum heat loss is taken as 98% of the maximum heat loss. Temperature profile using 2-D analytic method and relative error of temperature along the fin length between 1-D and 2-D analytic methods are presented. Increasing rate of the optimum heat loss with the variation of Biot number and decreasing rate of that with the variation of the fin base length are listed. Optimum fin tip length using 2-D analytic method and relative error of that between 1-D and 2-D analytic methods are presented as a function of Biot numbers ratio.