• ETRI Journal
• /
• 제24권4호
• /
• pp.280-289
• /
• 2002

In this work, we present a novel approach to the bit allocation problem that aims to minimize overall distortion subject to a bit rate constraint. The optimal solution can be found by the Lagrangian method with dynamic programming. However, the optimal bit allocation for block-based interframe coding is practically unattainable because of the interframe dependency of macroblocks caused by motion compensation. To reduce the computational burden while maintaining a result close to the optimum, i.e., near optimum, we propose an alternative method. First, we present a partitioned form of the bit allocation problem: a "frame-level problem" and "one-frame macroblock-level problems." We show that the solution to this new form is also the solution to the conventional bit allocation problem. Further, we propose a bit allocation algorithm using a "two-phase optimization technique" with an interframe dependency model and a rate-distortion model.

• Steel and Composite Structures
• /
• 제3권6호
• /
• pp.451-474
• /
• 2003

Details are given of a cold-formed steel portal framing system that uses simple bolted moment-connections for both the eaves and apex joints. However, such joints function as semi-rigid and, as a result, the design of the proposed system will be dominated by serviceability requirements. While serviceability is a mandatory design requirement, actual deflection limits for portal frames are not prescribed in many of the national standards. In this paper, a review of the design constraints that have an effect on deflection limits is discussed, and rational values appropriate for use with cold-formed steel portal frames are recommended. Adopting these deflection limits, it is shown through a design example how a cold-formed steel portal frame having semi-rigid eaves and apex joints can be a feasible alternative to rigid-jointed frames in appropriate circumstances.

• 마케팅과학연구
• /
• 제7권
• /
• pp.55-69
• /
• 2001

This article focuses on subject of the present question to traditional market. These days traditional markets have systemic problems due to deterioration of the outer market circumstance and the inner defect and the inner frailty. In this situation, from the SangNam market case analysis, was traced the alternative activation strategies. Issued the 6 inner competency competition strategies for traditional market and issued 7 functional frame for organization system construction. Struggle strategies is built up of the inner organization solidarity and effective management system. So as to build struggle strategies, suggested and issued the 4 phase organization frame to strength stage of traditional market organization operating.

• 수산해양기술연구
• /
• 제32권4호
• /
• pp.432-446
• /
• 1996

A stochastic Hamilton variational principle(SHVP) is formulated for dynamic problems of linear continuum. The SHVP allows incorporation of probabilistic distributions into the finite element analysis. The formulation is simplified by transformation of correlated random variables to a set of uncorrelated random variables through a standard eigenproblem. A procedure based on the Fourier analysis and synthesis is presented for eliminating secularities from the perturbation approach. In addition to, a method to analyse stochastic design sensitivity for structural dynamics is present. A combination of the adjoint variable approach and the second order perturbation method is used in the finite element codes. An alternative form of the constraint functional that holds for all times is introduced to consider the time response of dynamic sensitivity. The algorithms developed can readily be adapted to existing deterministic finite element codes. The numerical results for stochastic analysis by proceeding approach of cantilever, 2D-frame and 3D-frame illustrates in this paper.

• Journal of information and communication convergence engineering
• /
• 제7권2호
• /
• pp.164-169
• /
• 2009

An RFID system consists of radio frequency tags attached to objects that need to be identified and one or more electromagnetic readers. Unlike the traditional bar code system, the great benefit of RFID technology is that it allows information to be read without requiring contact between the tag and the reader. For this contact-less feature, RFID technology in the near future will become an attractive alternative to bar code in many application fields. In almost all the 13.56MHz RFID systems, FSA (Framed Slot ALOHA) algorithm is used for identifying multiple tags in the reader's identification range. In FSA algorithm, the tag identification time and system efficiency depend mainly on the number of tags and frame size. In this paper, we propose a tag number estimation scheme and a dynamic frame size allocation scheme based on the estimated number of tags.

• Journal of Welding and Joining
• /
• 제35권3호
• /
• pp.62-67
• /
• 2017

The automotive industry is in constant pursuit of alternative materials and processes to address the ever changing needs of their customers and the environment. Applications of laser welding have increased steadily in recent years due to its benefits including high speed, high productivity, and high energy density of heat source. This paper investigated the relationship between laser welding parameters and penetration characteristics. The Welding power was fixed at 5kW and welding speeds were varied for the thickness of the workpiece material. Full penetration occurred in the energy per unit area of $21J/mm^2$. The hardness of the weld zone was different for each strength of the workpiece material, however the lowest hardness values were the same in the heat-affected zone.

• Earthquakes and Structures
• /
• 제3권5호
• /
• pp.749-766
• /
• 2012

Structural control through integration of passive damping devices within the building structure has been increasingly implemented internationally in the last years and has proven to be a most promising strategy for earthquake safety. In the present paper an alternative configuration of an innovative energy dissipation mechanism that consists of slender tension only bracing members with closed loop and a hysteretic damper is investigated in its dynamic behavior. The implementation of the adaptable dual control system, ADCS, in frame structures enables a dual function of the component members, leading to two practically uncoupled systems, i.e., the primary frame, responsible for the normal vertical and horizontal forces and the closed bracing-damper mechanism, for the earthquake forces and the necessary energy dissipation. Three representative international earthquake motions of differing frequency contents, duration and peak ground acceleration have been considered for the numerical verification of the effectiveness and properties of the SDOF systems with the proposed ADCS-configuration. The control mechanism may result in significant energy dissipation, when the geometrical and mechanical properties, i.e., stiffness and yield force of the integrated damper, are predefined. An optimum damper ratio, DR, defined as the ratio of the stiffness to the yield force of the hysteretic damper, is proposed to be used along with the stiffness factor of the damper's- to the primary frame's stiffness, in order for the control mechanism to achieve high energy dissipation and at the same time to prevent any increase of the system's maximum base shear and relative displacements. The results are summarized in a preliminary design methodology for ADCS.

• 한국정보통신학회논문지
• /
• 제13권3호
• /
• pp.469-474
• /
• 2009

RFID 시스템은 식별되고자하는 사물에 부착된 태그들과 이를 인식하는 리더로 구성된다. 기존의 바코드 시스템과는 달리, 태그와 리더간에 접촉이 없이도 저장된 정보를 읽을 수 있는 특징이 있다. 이러한 비접촉 특성으로 인하여 RFID 기술은 다양한 응용 분야에서 바코드를 대신할 기술이 될 것이다. 13.56MHz 대역을 사용하는 대부분의 RFID 시스템은 리더 의 식별 영역에 있는 다중 태그를 식별하기 위하여 FSA 알고리즘을 사용한다. FSA 알고리즘인 경우, 식별 영역내에 있는 태그의 수와 프레임의 크기에 따라 태그식별 지연 시간과 시스템 효율이 크게 변화한다. 본 논문에서는 이러한 RFID 시스템에서 태그의 수를 추정하고, 추정한 태그의 수를 기반으로 프레임 크기를 동적으로 할당하는 기법을 제안한다.

• 대한가정학회지
• /
• 제30권1호
• /
• pp.115-131
• /
• 1992

The purpose of this study is the investigation of the physically handicapped childrens' residentical life, using furniture and opinion of auxiliary furniture ot find out alternative forms of desirable furniture. This study consists of two parts: a survey of residential life and furniture usage and a new chair design based on the survey. Documentary research, observational investigation and questionaire survey methods were used. According to the survey, a chair was chosen as the most needed piece of furniture. The alternative chair was designed to accomodate to the individual physical needs of each child. The structural charasteristics of the chair form consist of four parts: 1) basic seat 2) supporting metal frame 3) detachable chair legs 4) detachable table top. Auxilliary options include adjustable parts such as a head rest, seat belt, arm rest and pedestal.

• BMB Reports
• /
• 제40권1호
• /
• pp.15-21
• /
• 2007

Breast cancer is the most common malignancy among women, and mutations in the BRCA1 gene produce increased susceptibility to these malignancies in certain families. In this study, the forward 1-13 exons of breast cancer associated gene BRCA1 were cloned from breast cancer cell line ZR-75-30 by RT-PCR method. Sequence analysis showed that nine BRCA1 splice forms were isolated and characterized, compared with wild-type BRCA1 gene, five splice forms of which were novel. These splice isoforms were produced from the molecular mechanism of 5' and 3' alternative splicing. All these splice forms deleting exon 11b and the locations of alternative splicing were focused on two parts:one was exons 2 and 3, and the other was exons 9 and 10. These splice forms accorded with GT-AG rule. Most these BRCA1 splice variants still kept the original reading frame. Western blot analysis indicated that some BRCA1 splice variants were expressed in ZR-75-30 cell line at the protein level. In addition, we confirmed the presence of these new transcripts of BRCA1 gene in MDA-MB-435S, K562, Hela, HLA, HIC, H9, Jurkat and human fetus samples by RT-PCR analysis. These results suggested that breast cancer associated gene BRCA1 may have unexpectedly a large number of splice variants. We hypothesized that alternative splicing of BRCA1 possibly plays a major role in the tumorigenesis of breast and/or ovarian cancer. Thus, the identification of cancer-specific splice forms will provide a novel source for the discovery of diagnostic or prognostic biomarkers and tumor antigens suitable as targets for therapeutic intervention.